HighlyEducatedScholar

Student of Vapor
thanks Joint-Specialist. and i don't think i'll be over doing it seeing as how the hash reclaim from my grinder is the size of a pebble of like half a tic-tac lol.
 
HighlyEducatedScholar,

Rusty778

Getting Lost
Trakteur said:
I think there is a little misunderstanding here. Sorry if I wasn't clear enough, but I already know that if you don't draw there will be vapor leaking. I should have mentionned that there is more vapor going out from that hole than from the drawing hole (in fact I always start drawing my hits before there is any going out from the drawing hole). About the old air channel, you guys must be right because I bought my box on August 2010.

What I meant is between micro hits, there is clearly a cloud of vapor going out of my box and it isn't a negligible quantity. I can't use my box at the moment (been dry since the weekend), but I will try to get one of my friends to use it so I can post a video.

Thanks for the quick answers.


One more thing, I find that if you swing the lid around and push down on the lid spring a bit you can adjust the tension. My box leaked from the sides and the back a bit but now has a much better seal if the springs nice and tight
 
Rusty778,

Seek

Apprentice Daydreamer
Rusty778 said:
Trakteur said:
One more thing, I find that if you swing the lid around and push down on the lid spring a bit you can adjust the tension. My box leaked from the sides and the back a bit but now has a much better seal if the springs nice and tight
I also do this, but I noticed that it slowly decreases the tension in time too. So if you want it tight, you have to push it repeatedly. I worry if it will slowly break down the inner structure in the steel so it will break in time?
 
Seek,

Trakteur

Well-Known Member
Rusty778 said:
One more thing, I find that if you swing the lid around and push down on the lid spring a bit you can adjust the tension. My box leaked from the sides and the back a bit but now has a much better seal if the springs nice and tight

Yeah I do that maybe once a month.

I will try cleaning it and see what happens.
 
Trakteur,
Joint_Specialist said:
HighlyEducatedScholar said:
has anyone tried to vape hash out of their LB? i have this small piece of hash after i did a ISO wash with my grinder but wasn't sure if vaping hash would damage a MFLB in some way.

Yes, you can vape hash in the LB. But you need to be very careful and use a technique appropriate for the type of hash you have. Never put hash into the MFLB by itself. You want to mix it with herb. If your hash is very dry, crumble it into as fine a powder as you can and simply mix a small pinch in with a trench of finely ground herb. You want to avoid letting the hash melt into the screen. If your hash is moist mix it with herb or ABV before loading it into the box. Either way you want to shake and stir your trench often.

Also, don't over do it. Start off with a tiny amount of hash and get a feel for it. A little goes a long way. When you get it vaporizing right you will draw some very thick vapor!

Came in here to ask the same question as Scholar, so thanks!

Is it possible to put a small piece of tinfoil or some other non-flammable, impermeable material in the trench and put the hash directly on that rather than mixing it with herb? I have the PA so getting it up to the right heat may not be an issue, but I wouldn't want to damage anything (or die of inhaling aluminium vapours or something!)
 
flashy_mcflash,

pakalolo

Toolbag v1.1 (candidate)
Staff member
flashy_mcflash said:
Is it possible to put a small piece of tinfoil or some other non-flammable, impermeable material in the trench and put the hash directly on that rather than mixing it with herb? I have the PA so getting it up to the right heat may not be an issue, but I wouldn't want to damage anything (or die of inhaling aluminium vapours or something!)

4.18 Could I place foil on the screen of the Box so I can use it for oils, powders, etc?

Short answer: Don't do that.
 

nealcassidy

Well-Known Member
They might be flexible on the shipping - some people have checked on that with them via email.
I think they use USPS priority mail, and that has a base price of around $5.
If you're willing to accept a slower delivery, maybe they'll go for the cheaper method.
 
nealcassidy,

Vitolo

Vaporist
Joint_Specialist said:
I was all set to buy from them but they want to charge me $5 to ship 2 cases, 1 stem, and 1 battery pushback ring. First Class mail should be less than $2 for this light of a package!
I just emailed you some shipping info.
 
Vitolo,
Ear Wax with MFLB (merged)

Okay, I know what you all are thinking, but the other day I tried Ear Wax Hash in my MFLB. I know that this can mess up the screen so I had to be very cautious. I loaded up a full trench of herb and then placed two or three small pieces of the Ear Wax on top of the trench. It turns out the Ear Wax melts very slowly in the MFLB. Each hit you could see very slight melting going on. But I just made sure when i mixed up the herb not to let the Wax touch the screen at all, keeping it mostly on top of the herb. I could definitely taste the Ear Wax and felt a stronger high, but didn't notice any problems with the screen because the Ear Wax never touched it. I was curious if anyone else has tried this or if anyone else has any thoughts?
 
slickbutters,

cluffy

Vaker
slickbutters said:
Ear Wax with MFLB (merged)

Okay, I know what you all are thinking, but the other day I tried Ear Wax Hash in my MFLB. I know that this can mess up the screen so I had to be very cautious. I loaded up a full trench of herb and then placed two or three small pieces of the Ear Wax on top of the trench. It turns out the Ear Wax melts very slowly in the MFLB. Each hit you could see very slight melting going on. But I just made sure when i mixed up the herb not to let the Wax touch the screen at all, keeping it mostly on top of the herb. I could definitely taste the Ear Wax and felt a stronger high, but didn't notice any problems with the screen because the Ear Wax never touched it. I was curious if anyone else has tried this or if anyone else has any thoughts?

Yes, others have tried this Johnny-Come-Lately. :lol: Keep on experimenting! A big scoop of kif is a great trench topper too!!!
 
cluffy,

Seek

Apprentice Daydreamer
I made a new plastic bottle bong for MFLB during Page 602.

Now I have a vid :)
(No exhale sorry.)

Also I am posting this because I'm getting worried about the slowly growing tear...
Just look at it:
Oh what a poor box. :o

It works now, but for how long...?
I think it will take only a little time before first particles begin getting through. :uhoh:
 
Seek,

philmcan

Flying high
Seek said:
Also I am posting this because I'm getting worried about the slowly growing tear...
Just look at it:
Oh what a poor box. :o


Are the crease's/fold that run from the bottom of the "bowl" to the top normally come a little undone? My box has started to do that a little.
 
philmcan,

Seek

Apprentice Daydreamer
I don't know if I usterstood you correctly.

You talk about gaps in creases in the trench? Well, it's like a small origami and there's no hole behind it. If you are irritated by her getting in there, you can gently push it down.
 
Seek,

philmcan

Flying high
Thanks Vito!
@ Seek, I am talking about the four corners that come up from the rectangle at the bottom of the "bowl" to the top of the "bowl".
 
philmcan,
I figured the openings that form at the corners of the trench were nothing to be concerned about. Granted, I'm not entirely sure if they are widening or what is causing them to widen, but I have noticed that wear on mine as well.
 
slickbutters,

Seek

Apprentice Daydreamer
They're widening because of repeated brushing / cleaning. Just push them gently back tight with some tool, like the round end of the brush.
 
Seek,
I'm curious how many people have had to purchase new Launch Boxes due to screen tearing. Anyone have stories to share on that?

Also, I find it just slightly annoying (not necessarily MFLB's problem) that there is never a very comprehensive resource on what accessories are made available through the company for the product. Don't get me wrong, I love this damn thing so much, but when I recently did a google search for Magic Flight accessories, and found it difficult to determine what all of the options are from the company. I guess it's really not that big of deal, and if we lived in a society wear Marijuana was legal, this probably wouldn't be a problem, but it's just a little annoying.

I did just buy the adapter though. Who here uses the adapter and what do you think?
 
slickbutters,

WatTyler

Revolting Peasant
slickbutters said:
I'm curious how many people have had to purchase new Launch Boxes due to screen tearing. Anyone have stories to share on that?
Not very many- it's a warranty issue and replaced for free.
 
WatTyler,
Top Bottom