kushty said:
Is the mflb with a whip better or without?

Some people are saying to not even use a stem?

Can i get wand hash if i use a stem - similar to that i get in a DBV?

Also anyone with both DBV and MFLB - can i use MFLB abv in DBV or vise versa - ie does one cook it less than the other??

is the PA worth it?

with my DBV i end up blowing out loads of vapour in my exhale - is that lost vapour? ie green vapes that should have stayed in me to get more lean
I have both and it seems like the box actually darkens the bud just a little bit more. But my DBV seems to be more effient in it gets fuller hits and more of them. So what I would suggest if you want to get the most out of your herb. Is take a few drags of it out of the DBV and then transfer it to the box to finish it off.
 
VapeNStone,

DevoTheStrange

Ia! Ia! Vapor Fthagn!
Pre Stoned said:
Does anybody know the highest temperature the MFLB reached with the power adapter?

Honestly I think this would be hard to tell because most of the heat regulation in the MFLB relies on user inhale. I know with both the batteries and the power adapter can get hot enough to combust herb if there is no inhale when the power is on
 

max

Out to lunch
VapeNStone said:
So what I would suggest if you want to get the most out of your herb. Is take a few drags of it out of the DBV and then transfer it to the box to finish it off.
You could also do the reverse. The DBV can get plenty hot. If you want to vape hot enough to get black ABV, either of these models will do.
 
max,

pakalolo

Toolbag v1.1 (candidate)
Staff member
Pre Stoned said:
Does anybody know the highest temperature the MFLB reached with the power adapter?

I'd say that was irrelevant since it can reach combustion, with or without the PA.
 

mvapes

Scratchin' Glass!
Accessory Maker
I use my vm2 for my MF abv. It gives a real nice toasty flavor. But, with that being said my flight really does a good job just as long as I dont over fill my trench.

I've met some people locally that are new to the vapor community and they think they have to fill the trench with their new found toy but to me the less the better. I just keep refilling as needed. :2c:
 
mvapes,

Irie

Chant Down Babylon
Doing what she does best, On The Go!
MFLB.jpg
 
Irie,
I bought some Sanyo eneloops but they don't work in my MFLB, its not my unit because my PowerEX ones still work fine.

I took off the plastic skin, tried rotating it in, tried removing the pushback ring and made sure they're fully charged and they work fine in other electronics.

The only thing I haven't done is remove all the goop on the outside of the battery, I didn't do it with my PowerEX ones and they worked fine in my MFLB. Is the residue on my eneloops causing them to not work?

Edit: I scrapped off half of the goop with a pen knife and they work now. :p
 
REO Speedwagon,

vapirtoo

Well-Known Member
Reo:
Enloops or any batts. have to be at least 2000 mah or they will not work in the LB,
but will work fine in less demanding devices. :2c:
I alwlays clean all goop residue completely off.
I worry about goop build-up inside the batt. housing.
 
vapirtoo,

Abysm

Member
Are there any plans to make a liquid pad for the mf? I would love to be able to do native earwax in the box.
 
Abysm,

magicflight

Manufacturer
Manufacturer
Abysm said:
Are there any plans to make a liquid pad for the mf? I would love to be able to do native earwax in the box.

Hi,

Yes, there are plans in place for this. The design is complete -- alpha stage testing is still pending and system ops are still in draft. It will be a little while yet before I can say much about these.

-- Magic-Flight
 
Does anyone else have the problem of having the bowl catch on fire while hitting it?
It has happened 4 times over the last month and starting to cause damage to the screen
is there something i'm doing wrong?
 
Seagullmeat,
Seagullmeat said:
Does anyone else have the problem of having the bowl catch on fire while hitting it?
It has happened 4 times over the last month and starting to cause damage to the screen
is there something i'm doing wrong?
My guess is you need to contact Magic Flight and ask them some questions. Most likely your box is running a little to hot.
 
VapeNStone,

mrfloopa

Vappy
Seagullmeat said:
Does anyone else have the problem of having the bowl catch on fire while hitting it?
It has happened 4 times over the last month and starting to cause damage to the screen
is there something i'm doing wrong?

You're probably holding the battery in too long/letting the herb rest too much on the screen without moving. The design for the MFLB is actually kinda crude--so it will keep getting hotter the longer it has a complete connection. If you let it get too hot, it will combust. You can cool it by letting it heat up for a shorter amount of time before taking your hit, or (if it is combusting after you start your hit) breath in quicker to begin with to cool it down before it burns.

Edit: Also remember to shake up the herb. If you leave the dry, vaped weed in contact with the screen, it will combust easier.

Edit: Combusting after you start taking your hit*
 
mrfloopa,

Seek

Apprentice Daydreamer
If it is ignited, DO NOT breath faster, it will enhance the heat and that can't be good. When I ignite I immediately blow the herb out. Ignition happens about 3 times a month to me. I am happy with the box performance, but is it running too hot? I have normal heat up times, sometimes when I roast it without drawing I can do it about for 20 seconds without any combustion. But other times, I can draw from the box and within few seconds (from the battery contact) it is on fire. Weird.
 
Seek,

weedemon

enthusiast
magicflight said:
Abysm said:
Are there any plans to make a liquid pad for the mf? I would love to be able to do native earwax in the box.

Hi,

Yes, there are plans in place for this. The design is complete -- alpha stage testing is still pending and system ops are still in draft. It will be a little while yet before I can say much about these.

-- Magic-Flight

Oh joy! I have been using my backup box as a dedicated oil vape by putting a little in the back corner, and I must say it is amazing! I can't wait to see what MF has in store for us regarding a concentrate add-on! :ko:

I have a friend (that I bought a mflb for his birthday) that has recently has seen the amazing breakthrough in concentrates that are BHO. He is less and less interested in weed, and just wants to run batches of bho instead. He will also be thrilled to know there is a concentrate pad in the works! :D

Btw I got my WA today! Thank you very much!

I went out and bought an Ehle 250ml with a 14mm gg fitting, It works a charm and I must say I was quite amazed at the thickness of the vapor.

I don't know if any of you remember me saying I was going to be interested to see if i could duplicate vitolo's video. Well i'm not shooting a vid, but let me just say the clouds are impressive!
 
weedemon,

kushty

Well-Known Member
Can anyone recommend a good glass peice I could attach to my MFLB and my DBV? What other parts would I also need?

Is it worth spending money on glass attachments to my vapes?
 
kushty,

kushty

Well-Known Member
Is a small space case a good grinder for MFLB and DBV? Been using it fine for my DBV but heard that I need it super fine for the MFLB
 
kushty,

kushty

Well-Known Member
Seagullmeat said:
Does anyone else have the problem of having the bowl catch on fire while hitting it?
It has happened 4 times over the last month and starting to cause damage to the screen
is there something i'm doing wrong?


Hey man

In your pic have you connected your MF to a bag??
 
kushty,

Seek

Apprentice Daydreamer
kushty: nice triple post bro, learn to use edit.

MFLB can vape fine grind fast and evenly. Very find grind is just a little faster(maybe even more evenly).

If you will attach a bag somehow, you can blow into air intake. I'm not gonna do it. I don't want my breath go to the MFLB and bag several times...
 
Seek,

mvapes

Scratchin' Glass!
Accessory Maker
Seagullmeat said:
Does anyone else have the problem of having the bowl catch on fire while hitting it?
It has happened 4 times over the last month and starting to cause damage to the screen
is there something i'm doing wrong?

Shoot an email to them, that doesnt sound good.
 
mvapes,

mvapes

Scratchin' Glass!
Accessory Maker
kushty said:
Is a small space case a good grinder for MFLB and DBV? Been using it fine for my DBV but heard that I need it super fine for the MFLB

Whats up Kushty? Personally I feel that space cases are over priced. I use a mendo mulcher, you can two or three piece and their made in the USA. They are in my opinion the dankest grinders ever. As far as a carry around, I like sharp stone...teeth can be replaced if broken, great screens that dont clog easily for my pollen, and they run almost half the price of a typical space case.
 
mvapes,
Top Bottom