The Lotus Vaporizer

pigfoot

Dabs are vapor too!
It's been about a month since my first post and initial problems, and I sit here after some quality time with the Lotus and figure I owe FC my thoughts, if only for posterity. I'll leave my mark on the world somehow.

I kind of bought the Lotus on a whim, as something to use off-the-grid where a battery just doesn't make sense. I never intended to use it as frequently as I now enjoy is my point, and my Solo and EQ have been collecting dust and will likely find their way to a more appreciative home very soon.

That's how wonderful the Lotus is, as has been reiterated throughout this thread. It's simple and beautiful, efficient and sure as hell effective. I had no real problems with my Solo before, but now it seems so mindless and uninvolved (and slow!) that it's hardly a joy to use any more. What I achieved in 12 minutes with the Solo I can do in under 2 with the Lotus, and I find the clouds much denser and tastier.

I absolutely love not ever needing to be tethered to an outlet, though I think I'll pick up an E-Nano for those occasions.

I've been using domed screens (shaped like a 'u' in the chamber) to make cleaning a little easier - even after I've dumped all my material there's still one last milky hit to be had from the screen(s).

To those considering the Lotus, consider no longer - there is no doubt this little beauty will leave you more than satisfied.

I wish there was more I could say, but I'd be preaching to the choir and beating a dead horse all at the same time.

I placed an order from the J Hook, the hex screwdriver and two replacement hot plate kits about a week before the new plates were released and they very kindly let me exchange them, so A++ customer service for sure.

I don't have the ideal piece of glass to pair with my Lotus just yet though - I'll have to pick up that d020 when I get the chance.
K2EOcGJ.jpg


:love:

I considered a JET waterpipe but their aesthetic and design is so contrary to the Lotus that I don't know if I could stand it.

I'm completely under the Lotus' control now.. it's invaded the very base constituents of my being, and I don't think I want it any other way :uhoh:

That small bubbler looks like a pretty good match. I have the D020, and while it works great, the lighter is a tad closer to my face than I prefer. I've got an ash catcher for my J hook on order.

I think this might be the one you are looking for, I use it, and love being able to switch between single and double flame. http://www.ebay.com/itm/1300-C-2500...240?pt=LH_DefaultDomain_0&hash=item1c368628e0

Do you use the double flame with the Lotus?
 

Gray Area

Well-Known Member
I would say that this is too large a flame. Scaling from the pic, it looks like it's 3/4"+. If it was smaller it could be closer to the hot plate and not over-heat anything.
Of course every one has their own style of heating but that's my opinion. There's a lot more styles and subtlety of heating on this forum than I have figured out.

Well, I have it a go with a shorter flame, and have to say still prefer my original flame size. Feel I have more control over the amount if heat (even if it takes a second or two more to heat up first go).

Maybe the pics I posted were deceiving. The bright part of my lighter flame is exactly the same as the distance between tips of the lotus flower on the cap. Iirc that was some sort measure as to the correct size..?
 

ataxian

PALE BLUE DOT
Well, I have it a go with a shorter flame, and have to say still prefer my original flame size. Feel I have more control over the amount if heat (even if it takes a second or two more to heat up first go).

Maybe the pics I posted were deceiving. The bright part of my lighter flame is exactly the same as the distance between tips of the lotus flower on the cap. Iirc that was some sort measure as to the correct size..?
I like a shorter flame and barely touch the center of the plate.
Works every time!

When I get the urge to smoke a joint I use the LOTUS.

Even the cheap honesty lighter that comes with the LOTUS works. The torch I regularly use works better because the position is better for my style. More of a DAB position.

Maybe I'm a Light weight however this basic little device medicates well!

So simple!
 
Last edited:

Gray Area

Well-Known Member
I like a shorter flame and barely touch the center of the plate.
Works every time!

When I get the urge to smoke a joint I use the LOTUS.

Even the cheap honesty lighter that comes with the LOTUS works. The torch I regularly use works better because the position is better for my style. More of a DAB position.

Maybe I'm a Light weight however this basic little device medicates well!

So simple!

Horses for courses I guess :tup: with the torch flame, only the very tip of the shadow flame usually touches my plate (once it's warmed up).

Have to agree with the comparison to smoking, I used to smoke joints but reckon this vape would be a pipe smokers dream.
By far the best vape I've found to use with bubble or old-school imported hash... tastes divine :love:

I use the Honest lighter that I got with my Lotus and am having zero issues with it. A thorough purge and it works well every time... It works so well I'm going to buy a few more the same as back ups.
 

nemo

Well-Known Member
i m not 100% sure that it's the same plastic, cause it was another brand... but! 1 drop of ethanol accidentally spilled on a torch lighter, was enough for it to crack and start spilling butane :p ...

im just saying it as a precaution... as i was wondering what the f#( had happened :lol:
 
nemo,

pigfoot

Dabs are vapor too!
I ordered an ash catcher from ebay - there are some different ones there that my favorite Chinese vendors don't have. This one's called an "onion bulb". Pretty well lined up, perc fires nicely. Take a surprisingly large amount of water. Both joints 14mm, fits the Lotus and J jhook well. Great viewing angle for perc and hot plate.

IMG_2043.jpg


IMG_2044.jpg
 
Last edited:

GrilledGoat

New Places
Well I have been lurking this thread for a while and decided a few days ago to order the lotus and it has arrived!
4BoVM54.jpg




This thing is a heavy hitter even compared to the solo! I did accidentally combust 2 bowls which called for an iso bath to get rid of the smell and taste.
Now I have gotten the flame the right length i believe and this thing is incredible. Perfect for at home or portable.

Funny thing is I have a PnP on the way and I don't even know if I need that any longer.
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Well I have been lurking this thread for a while and decided a few days ago to order the lotus and it has arrived!
4BoVM54.jpg




This thing is a heavy hitter even compared to the solo! I did accidentally combust 2 bowls which called for an iso bath to get rid of the smell and taste.
Now I have gotten the flame the right length i believe and this thing is incredible. Perfect for at home or portable.

Funny thing is I have a PnP on the way and I don't even know if I need that any longer.
Glad your on board! I sold my PnP shortly after picking up my Lotus. I enjoy your avatar btw, I copied it to my pictures file.
 

cybrguy

Putin is a War Criminal
I ordered an ash catcher from ebay - there are some different ones there that my favorite Chinese vendors don't have. This one's called an "onion bulb". Pretty well lined up, perc fires nicely. Take a surprisingly large amount of water. Both joints 14mm, fits the Lotus and J jhook well. Great viewing angle for perc and hot plate.

IMG_2043.jpg


IMG_2044.jpg
I like that. Can I ask you what you had to pay for it? I have the j-hook and that really looks like great way to get a better view of what all is goin on than any of my current pieces and I expect it is "reasonable"...

I see you are using that REZ stuff. Does it actually save cleaning effort? Worth the cost?

Edit: Damn, I see there is a whole thread on Rezblock. Your opinion is still solicited, but I will go read the thread (or part of it. Its 35 pages) for the full skinny.
 
Last edited:

FlyingLow

Team NO SLEEP!
I am moving apartments today, and went for my al. stem out of convenience.
She rips, but the herb I have only vapes well when ground fine and I am getting so much crap through the screen.

Are any of you all using finer screens? If so, do you know what their micron count is?
 

stickstones

Vapor concierge
I have now introduced three people to the Lotus using a bubbler for two of them and the stock stem for the other one. All three were hitting it like a champ on their first hit. One of them bought one and the other two want one.

I tell them to heat it up before inhaling just to the point of glowing. Then inhale and find the sweet spot by moving the torch closer/farther and/or changing your draw speed faster/slower. I tell them how those tow things effect temp. Then I watch them do it and tell them what to do while using it...draw faster, draw slower, pull the torch away, bring it closer. Those are the only four things to do with this vape. As nervous I am about people combusting with my rig, they have all hit it better than I do!
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Those are the only four things to do with this vape. As nervous I am about people combusting with my rig, they have all hit it better than I do!
Lol, I know exactly what you mean. You look at that milk like :o and your thinking scorched bowl, then you look and you got another rip or three left! Back when I first got my VG coil my buddies would have competitions for best milk and combustion occurred alot more frequently than with the Lotus.
 
Top Bottom