The Hippie Pipe X - Analog Portable Vaporizer

thehippie

Well-Known Member
Company Rep
Hi everyone, we would like to introduce our newest analog vaporizer, the Hippie Pipe X!

Highlights:
  • 30% Bigger Chamber compared to the original Hippie Pipe
  • Rapid heating, No more indicators
  • Superb build quality and features a Premium Design
  • Telescopic Heating Chamber makes caps or any other small detachable parts obsolete
  • fairly simple to use with our unique spring-loaded loading for easy filling using no extra parts.

pipex.jpg
pipex-kit.jpg



** Shown above is the Hippie Pipe X in Ebony Blackwood, The Double Jet Flame Torch Lighter and The Pipe Holder, which holds the Pipe, Lighter and has a flower stash - perfect on-the-go kit! :)

🔗 The Hippie Pipe X Bundle Kit

If you have any questions, feel free to ask! :)
 
Last edited:

thehippie

Well-Known Member
Company Rep
Check out this great review by Lee of TableTopBong with an overview of the Hippie Pipe X, plus Tips and Tricks on how to get the best results with an amazing smooth flavor.


As Lee said in the video, The Hippie Pipe X is as instant as you can expect a vaporizer to be, your puffin’ on it within 10 seconds and with a really great efficient extraction.
  • It is a great "On Demand Heat System"
  • Great for backpacking/hiking: no need to charge
  • An awesome vape for the outdoor enthusiast
Please let us know if you have any comments or questions, we'd love to hear from you! :)
 

Mribisback_

Well-Known Member
Very interesting. I appreciate you guys trying to stand out from the other devices in this category.

My first thought was, is it possible to gunk up that telescopic part if you don't keep up with cleaning?
 
Mribisback_,
  • Like
Reactions: thehippie

thehippie

Well-Known Member
Company Rep
Very interesting. I appreciate you guys trying to stand out from the other devices in this category.

My first thought was, is it possible to gunk up that telescopic part if you don't keep up with cleaning?
We recommend doing regular cleaning since gunk builds up over time. For daily usage, we recommend at least weekly, otherwise around 2-3 times a month.

We're happy to let you know that it is not such a hassle to clean the Hippie Pipe X, since you can disassemble it pretty easily.

Here are the steps:

1. Unscrew the mouthpiece and remove it.
2. The spring and air tube will slide out easily.
3. To remove the wooden handle, rotate and wiggle as you pull it off.
4. To remove the chamber screen, push the brush tool into the air tube and against the back of the screen until it pops out.
5. To clean the parts (with the exception of the wooden handle), soak them in isopropyl alcohol for at least 30 minutes and clean with the brush after if needed.
6. Let the parts dry or wipe them off with a paper towel and re-assemble.

Click here to watch the How-to Clean Video Tutorial

Please let us know if you have any other questions or clarifications :)
 
Last edited:

iDRINKBLEACH

knowing is half the power - Gi-JOE
Accessory Maker
almost like a mini lotus esque stem. Wifey doesn’t care for when I purchase vapes that she can’t use with too much learning curve. Interested in what some ents from around here have to say. Would be nice to see it hooked up to some water to see the production a bit easier.
 
iDRINKBLEACH,

thehippie

Well-Known Member
Company Rep
almost like a mini lotus esque stem. Wifey doesn’t care for when I purchase vapes that she can’t use with too much learning curve. Interested in what some ents from around here have to say. Would be nice to see it hooked up to some water to see the production a bit easier.
Lee from TableTopBong made a really great video with his bong.

Honestly, it doesn’t take long to learn the learning curve, takes a little bit time and effort to learn but not a big learning curve so wifey can probably test it out :) Because once you get it to the exact extracting heat you want it at, it is really a great efficient extraction with a very amazing smooth taste. You might be interested to watch Lee's complete review here, he talks about the learning curve and shows how easy it is.
 
Last edited:

kokolokokolokon

Well-Known Member
Love that holder, it is a great idea. And nice lighter.
And good review video! I saw a video time ago but the guy in the video was combusting every time and he liked it…bad publicity…but this one was very good! I finally can see a good use of this vape!
Is it made of stainless steel 304 or 316L?
Does it work with a normal lighter?
Does it comes with extra mesh?
How much herb can be use in the chamber? Max and min?
Any plans to sell it on EU or by a shop like lacentralevapeur?
I did read the first one was bad for herb but good for hash…can i asume this new device is good for hash too?

Edit: nice video with the fmj!
 
Last edited:

iDRINKBLEACH

knowing is half the power - Gi-JOE
Accessory Maker
Lee from TableTopBong made a really great video with his bong.

Honestly, it doesn’t take long to learn the learning curve, takes a little bit time and effort to learn but not a big learning curve so wifey can probably test it out :) Because once you get it to the exact extracting heat you want it at, it is really a great efficient extraction with a very amazing smooth taste. You might be interested to watch Lee's complete review here, he talks about the learning curve and shows how easy it is.
Oh nice I didn’t see that. It did well with that flask. She’s a picky one, definitely watching to see what this community thinks of it. Very cool and put together slick :clap:
 
iDRINKBLEACH,
  • Like
Reactions: thehippie

thehippie

Well-Known Member
Company Rep
Love that holder, it is a great idea. And nice lighter.
And good review video! I saw a video time ago but the guy in the video was combusting every time and he liked it…bad publicity…but this one was very good! I finally can see a good use of this vape!
Is it made of stainless steel 304 or 316L?
Does it work with a normal lighter?
Does it comes with extra mesh?
How much herb can be use in the chamber? Max and min?
Any plans to sell it on EU or by a shop like lacentralevapeur?
I did read the first one was bad for herb but good for hash…can i asume this new device is good for hash too?

Edit: nice video with the fmj!
Thank you and yes, the Hippie Pipe X Bundle Kit is really your on-the-go kit. And you can easily store the pipe immediately after using without the hassle of waiting for it to cool. What's great about the Hippie Pipe X is having the flexibility to create the vape experience that you want, depending on your preference.

And here are the answers to your questions:
  • The Hippie Pipe X is made of 304 stainless steel.
  • Yes, it also works with normal lighter. However, for best results we recommend using the Double Jet Flame Torch Lighter.
  • Yes, it comes with 2 replacement screens and 4 O-rings.
  • As of now, we don't have any resellers in Europe but we do ship worldwide.
  • Yes, it should work well with hash as well.
  • For the exact weight of the herb - I'll check with the team and will get back to you on that
Hope that helps! :)
 

kokolokokolokon

Well-Known Member
Thank you and yes, the Hippie Pipe X Bundle Kit is really your on-the-go kit. And you can easily store the pipe immediately after using without the hassle of waiting for it to cool. What's great about the Hippie Pipe X is having the flexibility to create the vape experience that you want, depending on your preference.

And here are the answers to your questions:
  • The Hippie Pipe X is made of 304 stainless steel.
  • Yes, it also works with normal lighter. However, for best results we recommend using the Double Jet Flame Torch Lighter.
  • Yes, it comes with 2 replacement screens and 4 O-rings.
  • As of now, we don't have any resellers in Europe but we do ship worldwide.
  • Yes, it should work well with hash as well.
  • For the exact weight of the herb - I'll check with the team and will get back to you on that
Hope that helps! :)
Thank you very much!
do you know how much heatings cycles you can get from your dual jet lighter?
did you try to use the pipe x with a Induction Heater?
i can say you dont ship worldwide, just to concrete countries. I did try to buy a pipe X some time ago but there is no shipping to spain (even i asked by mail)
 
Last edited:

thehippie

Well-Known Member
Company Rep
Thank you very much!
do you know how much heatings cycles you can get from your dual jet lighter?
did you try to use the pipe x with a Induction Heater?
i can say you dont ship worldwide, just to concrete countries. I did try to buy a pipe X some time ago but there is no shipping to spain (even i asked by mail)

Thank you very much!
do you know how much heatings cycles you can get from your dual jet lighter?
did you try to use the pipe x with a Induction Heater?
i can say you dont ship worldwide, just to concrete countries. I did try to buy a pipe X some time ago but there is no shipping to spain (even i asked by mail)
Hi, I just confirmed with our fulfillment center and we do ship to Spain. Shipping to certain countries were suspended due to Covid restrictions but since most countries are open now, I believe we are able to ship worldwide except when certain restrictions are in place.
 

kokolokokolokon

Well-Known Member
Hi, I just confirmed with our fulfillment center and we do ship to Spain. Shipping to certain countries were suspended due to Covid restrictions but since most countries are open now, I believe we are able to ship worldwide except when certain restrictions are in place.
Great notice!
 
kokolokokolokon,
  • Like
Reactions: thehippie

thehippie

Well-Known Member
Company Rep
Love that holder, it is a great idea. And nice lighter.
And good review video! I saw a video time ago but the guy in the video was combusting every time and he liked it…bad publicity…but this one was very good! I finally can see a good use of this vape!
Is it made of stainless steel 304 or 316L?
Does it work with a normal lighter?
Does it comes with extra mesh?
How much herb can be use in the chamber? Max and min?
Any plans to sell it on EU or by a shop like lacentralevapeur?
I did read the first one was bad for herb but good for hash…can i asume this new device is good for hash too?

Edit: nice video with the fmj!
Hi, the weight for the herb that can be used in the chamber is 0.15-0.20 g. We recommend to completely load it for less chance of combustion.
Please let me know if you have other questions and I'll be glad to help! :)
 

vapormachina

Well-Known Member
Hi, I just confirmed with our fulfillment center and we do ship to Spain. Shipping to certain countries were suspended due to Covid restrictions but since most countries are open now, I believe we are able to ship worldwide except when certain restrictions are in place.
nice! hope to see it in Europe reselers soon💪🏻
 
vapormachina,

kokolokokolokon

Well-Known Member
Hello Fuckcombusters!

Today I received a Pipe X with the whole kit: the vape, the stash and the double flame lighter.

Unboxing review

In parts. The packaging is small, and I like it.

The packaging of the lighter is the largest, and it may be a little unnecessary but not too much either. It is well padded so that it does not take any blows.

The packaging of the Stash is very, very simple. It is, literally, a box of thin cardboard without more than the stash. The good thing is that it is a plastic stash (except for the vape compartment, which has a metal layer) so there was no danger of damage.

The packaging of the vape is the best, in my opinion. The vape is presented in a soft and very small but quality box. And inside it presents the minimum and fundamental: the vape, some orings, a couple of extra grids and a QR that takes you to the web, where you have the instructions for use and disassembly.

The lighter has a light weight without sacrificing aesthetic quality. It looks good quality and is in zippo format. It's thinner than a zip but taller. The flame adjustment is simple, accessible (you don't need a tool) and effective. The double flame is parallel. I like it a lot.
Later, when I have more experience, I will specify its functionality by comparing it to the double flame insert of zippo, since they have a similar operation.

I really like the concept of the stash, it also looks resistant and packs everything very well. The grass compartment works quite well, although the vape compartment and the lighter is difficult to open at first. It has a very rough mechanism, which seems to become more manageable when using it (although I have to say that it is scary to break it because you have to work hard to open it). I will continue to comment after having used it for a while, so I will know its resistance and wear and tear with use.

Finally: the pipe X. It's smaller than I thought. It has a good touch and is light. The first thing I did was to disassemble it to see the parts and clean it. Surprisingly, the vape has arrived very clean (other butane vapes that I have tried needed a good cleaning before using them), after cleaning it with iso I have seen how the cotton was still white. When disassembling it, you have to be careful with the screen, since you need the cleaning tool in the box and the screen can fly away. The wooden sleeve is 8mm (I have tried to put dynavap stems and they fit, but they are very long) and the wood has a good touch, although somewhat dry, so I have applied a little beeswax on it, making it softer and with better color. I will do tests (with their indications, experiments, other lighter and with the wand; with herb, hash and concentrates) but not right now since my throat is currently swollen due to an illness and I can't vaporize, but I will update the use of the device in action! For now, I enjoy using the mechanism to fill and empty the chamber, it's very comfortable!

 

thehippie

Well-Known Member
Company Rep
Hello Fuckcombusters!

Today I received a Pipe X with the whole kit: the vape, the stash and the double flame lighter.

Unboxing review

In parts. The packaging is small, and I like it.

The packaging of the lighter is the largest, and it may be a little unnecessary but not too much either. It is well padded so that it does not take any blows.

The packaging of the Stash is very, very simple. It is, literally, a box of thin cardboard without more than the stash. The good thing is that it is a plastic stash (except for the vape compartment, which has a metal layer) so there was no danger of damage.

The packaging of the vape is the best, in my opinion. The vape is presented in a soft and very small but quality box. And inside it presents the minimum and fundamental: the vape, some orings, a couple of extra grids and a QR that takes you to the web, where you have the instructions for use and disassembly.

The lighter has a light weight without sacrificing aesthetic quality. It looks good quality and is in zippo format. It's thinner than a zip but taller. The flame adjustment is simple, accessible (you don't need a tool) and effective. The double flame is parallel. I like it a lot.
Later, when I have more experience, I will specify its functionality by comparing it to the double flame insert of zippo, since they have a similar operation.

I really like the concept of the stash, it also looks resistant and packs everything very well. The grass compartment works quite well, although the vape compartment and the lighter is difficult to open at first. It has a very rough mechanism, which seems to become more manageable when using it (although I have to say that it is scary to break it because you have to work hard to open it). I will continue to comment after having used it for a while, so I will know its resistance and wear and tear with use.

Finally: the pipe X. It's smaller than I thought. It has a good touch and is light. The first thing I did was to disassemble it to see the parts and clean it. Surprisingly, the vape has arrived very clean (other butane vapes that I have tried needed a good cleaning before using them), after cleaning it with iso I have seen how the cotton was still white. When disassembling it, you have to be careful with the screen, since you need the cleaning tool in the box and the screen can fly away. The wooden sleeve is 8mm (I have tried to put dynavap stems and they fit, but they are very long) and the wood has a good touch, although somewhat dry, so I have applied a little beeswax on it, making it softer and with better color. I will do tests (with their indications, experiments, other lighter and with the wand; with herb, hash and concentrates) but not right now since my throat is currently swollen due to an illness and I can't vaporize, but I will update the use of the device in action! For now, I enjoy using the mechanism to fill and empty the chamber, it's very comfortable!

Hi, For the top cover - Since it's brand new, the locking mechanism is still tight and makes it hard to open at first. But eventually, after a few times, it'll loosen and it'll be easier to open. We have a tutorial video to show you how to easily open it. You can check our tutorial videos here

Thank you and please let us know if you need anything :)
 

kokolokokolokon

Well-Known Member
Hi, For the top cover - Since it's brand new, the locking mechanism is still tight and makes it hard to open at first. But eventually, after a few times, it'll loosen and it'll be easier to open. We have a tutorial video to show you how to easily open it. You can check our tutorial videos here

Thank you and please let us know if you need anything :)
Thanks to you!
I notice how the stash is becoming smoother with the use :D
Im watching the videos to start to use it in the moment im good. I will try it with the silver ring too :rockon:
 

ChronPain86

Active Member
I have a question about this device. Can you add an additional cap on the hippie pipe to help protect from combusting if your using an induction heater? I assume using that would make it combust as the X on the herb scoop side would have heat from the tip of the pipe being inside an induction heater...yes or am I way off?

Canadian retailers for the hippie pipe bundle by chance?
 

thehippie

Well-Known Member
Company Rep
I have a question about this device. Can you add an additional cap on the hippie pipe to help protect from combusting if your using an induction heater? I assume using that would make it combust as the X on the herb scoop side would have heat from the tip of the pipe being inside an induction heater...yes or am I way off?

Canadian retailers for the hippie pipe bundle by chance?
Hi, yes you can definitely add a Full Metal Jacket for it. We've heard from people who used the Pipe X with induction heater with great success so it shouldn't be a problem!

As of the moment, we don't have Canadian retailers but we're working on it. :)
 

kokolokokolokon

Well-Known Member
I have a question about this device. Can you add an additional cap on the hippie pipe to help protect from combusting if your using an induction heater? I assume using that would make it combust as the X on the herb scoop side would have heat from the tip of the pipe being inside an induction heater...yes or am I way off?

Canadian retailers for the hippie pipe bundle by chance?
You can use the silver ring too. I tried it in the pipe x and it gives good results. If you use an induction heater for the pipe X is better to use it without the fmj and the silver ring because they don’t work very well on IH’s.
And it is better to use an agressive ih since the pipe x is a device that needs direct power and cools down quickly. If you use a slow-heating IH like the wand, the device is going to get quite hot and you're not going to get good results like with the lighter
 

ChronPain86

Active Member
You can use the silver ring too. I tried it in the pipe x and it gives good results. If you use an induction heater for the pipe X is better to use it without the fmj and the silver ring because they don’t work very well on IH’s.
And it is better to use an agressive ih since the pipe x is a device that needs direct power and cools down quickly. If you use a slow-heating IH like the wand, the device is going to get quite hot and you're not going to get good results like with the lighter
I would have assumed you could Not use the hippie pipe x in an induction heater based on the spring opening compartment that they tell you not to heat up with a lighter/torch due to it being thinner I assume? So I would have guessed it might combust if the pipe x as used in a IH without a fmj or silver ring.

Will have to look into that more or see some videos if people have done it and how the avb turned out
 
ChronPain86,

vapormachina

Well-Known Member
A fast video with the Orion

I tried it in other induction heaters with FMJ and works fine, but how I prefer without any doubht is with lighter and default mode, very fast and powerful. I'll prepare a good review soon in when I get good control with this thing💪🏻💪🏻
But I'm liking it:D
 
Top Bottom