The Herbalizer

[biohacker]

Hey @lazylathe I tried the bags with concentrates at 445. Noticed slightly better extraction but it seems I get bigger clouds with herbs versus. My Herbie seems to be heating herbs well so I doubt it's the heat that's an issue. Anyways I still have nothing but TOTAL FUCKING LOVE for my Herbie. What this machine does is truly revolutionary to the vape world. The whip is different from your average one. It cools the vapor so well I go to exhale and a dragon cloud comes rolling out
Still not having any luck through water...kind of a drag since I mainly vaped through water.

Is it maybe your concentrates?

What's the deal with water? I've successfully used the herbie with whip to a bong, and when I get my own that's the way I plan to use it exclusively.

I have no probs getting clouds off of concentrate on a aroma pad. Fan should be going and some vape gets away.. but works great!

How does some vape get away? Take a draw, and remove bowl while still pulling...no vapour escape?

 

[ludwig]

@toros23

I went back in this thread and I saw you removed the lid.. I want to do the same but I cant figure out how to get to the nut... Any tips? Anyone else figured it out?

I want to remove the storage level leaving me space to store a balloon when I close it along with the whip..

Last night I was a zombie after messing round with the herbie with a few bowls worth.. Still learning how to get the most out of this beast..

 

[DDave]

Hey All, interested in cleaning the top screen of Herbie's oven without removing it? I was!

From how Herbie performs for me, I figured one set of screens could last near-forever if I didn't need to remove the darn screens and swap them to clean the clogged top screen.

Well after much thought and a little medicating... wait, stop, reverse that... with much medicating and little thought I came up with something that works and works well! Below is how I clean the top screen, without removing it from the oven.

1) Open the oven into its two halves & turn on Herbie's Vaporizer, then set to highest temp.
2) Remove the black silicon heat shield from the top oven half (comes off easily).
3) Brush the heck out of the top screen, so you remove any crumbs! Then brush again, just in case.
4) Blow off the oven top, either with lung power or compressed air, to remove micro crumbs.
4a) If your oven top has a lot of reclaim in it, scrape it out before proceeding.
5) Then lay the top of the oven directly where you'd normally magnetically attach the whole oven.
6) Start the fan and let it finish on its own. (Caution! The oven top will get hella-hot!)
7) ONCE THE OVEN TOP COOLS, replace the black silicon heat shield and enjoy your cleaned screen!

Herbie is simply awesome! Vape On!

 

[stickstones]

@Mrmrmrmr -- What's keeping you from McGyvering this thing to a bubbler? At a minimum the whip mouthpiece can be shoved into a 14mm downstem, although most of us who are using water have used silicone tubing to home mod it. What do we need to get you on board?

 

[Mrmrmrmr]

Already Mcgyvered several contraptions that have worked on the evo and enano. Not sure why I'm not having success, I miss the hot water

 

[biohacker]

attach your nano gong to the tubing?

 

[Mrmrmrmr]

Unfortunately I don't have any enano gongs anymore .got a D020 coming in today I'll test the Herbie on it,maybe I will have success this time. I'm going to try putting the aromapads on top of the load as people have suggested

 

[biohacker]

d020 is 18mm, so you'll still have the same problem?

In other news, the trigger has been pulled! It's now just a matter of time to get into my hands! I now feel like I have the perfect arsenal that will cure my VAS!

 

[Custom Flower Hardware]

d020 is 18mm, so you'll still have the same problem?

In other news, the trigger has been pulled! It's now just a matter of time to get into my hands! I now feel like I have the perfect arsenal that will cure my VAS!

sorry but VAS has no cure as of yet! but herbie sure does help!

 

[Mrmrmrmr]

The seal was never the problem I just couldn't get any size able cloud through water yet I could blow dragon clouds through the whip
Edit-shay I believe Herbie has cured my VAS. temporarily at least. Currently cleaning house at 375!

 

[Rizzalso]

The seal was never the problem I just couldn't get any size able cloud through water yet I could blow dragon clouds through the whip
Edit-shay I believe Herbie has cured my VAS. temporarily at least. Currently cleaning house at 375!

I have the same problem with my Herbie. I get great clouds through the whip, but when I hook up a Gong I always seem to get very thin, wispy vapor through my bubbler. Although I don't use any extra silicone for mine, so I feel like the seal may be a problem for me. I just remove the standard whip mouthpiece and plug an 18mm GonG in it's place.

 

[stickstones]

It sounds like the seal, because i was white-walling my tube last night with a tight seal using an Extreme elbow connector to the tube.

 

[Mrmrmrmr]

It sounds like the seal, because i was white-walling my tube last night with a tight seal using an Extreme elbow connector to the tube.

Would you mind posting a picture (or just a description) of everything your using to connect the Herbie to your glass. Still very puzzled as to why I'm not able to whitewall,I've checked my seal several times
Don't have a EQ elbow but I do have a ssv gong connector which is very similar

 

[stickstones]

My pics are in this thread somewhere...let me look

Here it is!

This is what I use to attach to a hydratube. I have a different whip setup for the elbow connector. Regardless, the method is to use silicone to connect some type of connection to the top of the bowl, and then run that to glass.

 

[Mrmrmrmr]

Well what the hell...my setup is almost exactly like that minus the gong connected to the Herbie bowl.

 

[Madcap79]

@Mrmrmrmr Don't feel bad. I can't whitewall my HT either. I do however get very medicated.

 

[Vicki]

My lung capacity isn't as good as it used to be, so I always use the fan assist. Whether I am using a balloon, or the whip with my Infamous Bubbler.

 

[lazylathe]

Herbie has so far white walled all of my glass with ease!
I have always had to tap out while Herbie was just getting started!!

@biohacker Yeeee Haaaaa!!!
Herbie has most definitely cured my VAS!
All I need now is a good e nail, which is on the way so I should be good to go!!

 

[stickstones]

It could also be how much you guys are packing. I can't whitewall with just a sprinkling in there, but if I fill it up to the place where the bowl widens I get all I want.

 

[Mrmrmrmr]

I'll keep that in mind when I pack the next one (which will be in a few minutes , what temperature range are you doing for water @stickstones ?

 

[stickstones]

honestly, I've been camping out at 445 a lot lately as I am looking for heavy effects! The thickness goes down noticeably anywhere below 390, imo.

 

[Vitolo]

True enough, sticks. below 390 is not as dense, but after a few hits, at 370-390 range things cloud up plenty!

 

[Madcap79]

I have noticed that my biggest clouds come on my 3rd or 4th pull. I always get where I want to be though.

 

[John Lewus]

Does anyone know if the stainless steel mouthpiece is doped with silver? Silver has been used many cultures for its Antimicrobial properties. I would feel better having a mouthpiece like that when you share the whip at parties. This whip+mouthpiece style makes me slobber all over it.

 

[biohacker]

Do you not find much improved airflow without the mouthpiece? Although I respect its style, from what I have read here, some are taking it off for a noticeable improvement in airflow?

I wanna support PV as a supporting retailer here, but ofcourse my luck they are out of stock! Shouldn't be long, and the anticipation and the wait are things I sometimes enjoy! lol