various127
Well-Known Member
I feel the hammer works best with less. That way there's no need for stirring too. I used to fill it like 50-75%, but now I barely cover the screen at like 10-20%.
Discontinued The Hammer Vaporizer
- Thread starter Hammer Vaporizer
- Start date
-
- Tags
- flame powered
I feel the hammer works best with less. That way there's no need for stirring too. I used to fill it like 50-75%, but now I barely cover the screen at like 10-20%.
Philreal187
Well-Known Member
This is a quick look at the lock on silicone from the heating chamber. The one to the left was the one that came with the unit about 7 months ago, and the right one was never used. I obviously never changed it in that time. I would not say it saw heavy use but it definitely seen regular use. I never noticed any change in flavor or performance, but not too sure why it turned brown. I think the rough edge is from a few over heats in that time, I didn’t notice any silicone on the metal washer though. Didn’t hurt anything that I could notice but just as a precautionary measure I’m gonna check it more often and probably change it before 7 months passes again haha.
paytonpenn
Level 30 Nature/Healer
Mine becomes that color in about a month, but I probably go at higher temps and definitely leave it running longer. I've had a couple snap.
$unnyblaq
mist-or-vapor
@Hammer Vaporizer are those the new stems with bigger bowls on indiegogo, and do they come with clip and silicone?? I have no more stems or silicone so it would be awesome if it does.
This is a quick look at the lock on silicone from the heating chamber. The one to the left was the one that came with the unit about 7 months ago, and the right one was never used. I obviously never changed it in that time. I would not say it saw heavy use but it definitely seen regular use. I never noticed any change in flavor or performance, but not too sure why it turned brown. I think the rough edge is from a few over heats in that time, I didn’t notice any silicone on the metal washer though. Didn’t hurt anything that I could notice but just as a precautionary measure I’m gonna check it more often and probably change it before 7 months passes again haha.
Has it started to get brittle? This is the kind of deterioration I saw with the silicone sleeve on the Arizer Tuff Bowl for the EQ. It is an effect of the heat, not resin.
Philreal187
Well-Known Member
various127
Well-Known Member
anyone else have success using the hammer as a nail? I heated mine for maybe a minute and it never got red hot. I mean I got vapor from it, but not thick at all. All that happened was now the silicone for the lock on stem is loose and will pull off when taking off the stem sometimes. Well it happens when the metal is heated, but only heated enough for dry herbs.
paytonpenn
Level 30 Nature/Healer
Can you combust? You may have to try looking inside the heat port at different angles. Only the flat plate in the center gets red.
Is your dial at 75% or above?
Is your dial at 75% or above?
various127
Well-Known Member
I definitely probably could combust, I just don't want to risk/ get close because the stem will taste bad after. Yeah it's all the way up, I guess I just have to heat it longer.
paytonpenn
Level 30 Nature/Healer
For oil it needs to be at combustion temps, or you can look inside your hammer. The stem shouldn't combust if you're using oil though.
I know mine is definitely heated after 40 seconds but my internal dial has been raised to the highest without sputtering out every time.
Also, you need to apply the concentrate all the way inside the heat exchanger...
only the very center of the heat exchanger gets hot enough
Your stem should be empty so combustion is not an issue
only the very center of the heat exchanger gets hot enough
Your stem should be empty so combustion is not an issue
Check
Well-Known Member
Ive been considering the indiegogo deal now for some time. @Head Tools any word on when they might be shipped out?
Sinclue
OK disagree with me, I can't force you to be right
As I recall the he said they'd be in our hands before Christmas. The campaign ends in less than a week I believe so I'd guess he'll be sending them out not too long after that.
~
The Hammer PROs have arrived and are being packaged now! They will ship when the campaign ends on December 18..... you should have it by Christmas eve
Unisonruss
Well-Known Member
Just contributed! Hope you guys start selling those bubblers on your site after the campaign ends.
$unnyblaq
mist-or-vapor
I agree I saw a video from vapelife will on the pro and I loved his blubber. I also didn't know how well this worked for dabs. Now if I get my hands on some concentrate I have my handy ol hammer.
The Hammer PROs have already been produced and are being packaged now.
All orders will be fulfilled!
$unnyblaq
mist-or-vapor
@Head Tools Do you guys sell the silicon that is used as a WPA????
KidFated.
Unknown Member
I used the same silicone piece that goes in the stainless steel heat exchanger. Stuck on on. Stock lock on stem and right into the 14mm.
You mean the silicone ring that turns a glass stem into a makeshift gong adapter?
$unnyblaq
mist-or-vapor
yes sir
horst
horsed
Wassup FC hammer gang, been offline for a while but wanted to share a photo with you.
had to leave my old home and find a new one, quiet a bit of renovation needed to be done.
My friends called me nuts when i told them that i got all the jobs done with a hammer, even the paint-jobs
had to leave my old home and find a new one, quiet a bit of renovation needed to be done.
My friends called me nuts when i told them that i got all the jobs done with a hammer, even the paint-jobs
Check
Well-Known Member
How does the hammer compare to the vapman as far efficiency? Im in need of a vape that can perform with small amounts of material and can be used with ease while driving, and this seems like it may just be the one I am looking for. For those of you with The Hammer, does it fulfill my criteria?