Very cool!
The Advanced Telemetry Module by REFC Labs - The world's first advanced precision & multi-core capable desktop heater controller
- Thread starter RedEyeFlightControl
- Start date
If you go into the settings menu, there is an option to dim the LCD, too. The modules are "always on" even when the output is not energized.
Pukka
Well-Known Member
You can kinda adjust brightness setting at the bottom of the settings menu but not off afaik. I'm considering an on/off switch maybe ...
Yeah, that or a smart socket also crossed my mind.
Hippie
Well-Known Member
Add a switch ???
DC Power Extension Cord with Switch, DC switch Inline On/Off Cable Male to Female Jack for CCTV Cameras LED Strip Tape Light and other DC power Connector : Amazon.co.uk: Electronics & Photo
Free delivery and returns on all eligible orders. Shop DC Power Extension Cord with Switch, DC switch Inline On/Off Cable Male to Female Jack for CCTV Cameras LED Strip Tape Light and other DC power Connector.
www.amazon.co.uk
That does look perfect
I have a set of rockers here and am not quite pleased with the power handling. More on this later. But I'd watch these inline switches. Even the ones I bought rated for "10a" get rather warm under my ~6a load. Not startlingly so, but enough to cause a bit of second thoughts. Obviously this will vary by workload. My duplex runs a Herbo Ti and a HLT full time and my test rocker got warm. If you're running a smaller load like a log (woodscents, underdog, etc) it should be just fine. Those have relatuively low current draw.
I did consider adding a 4th hole for an optional toggle or rocker switch. This complicates wiring and does add a 4th hole that may or may not be used and that does screw with the aesthetics of the design. Perhaps I can include a knock-out on future editions. Will have to tinker with knock-outs in prints.
Edit - BTW a smart socket won't work - like some of the more advanced PIDs, this always boots into a de-energized state.
vaporoufixtras
sigma vape enjoyer
This looks so neat, finally a practical VVPS with wattage control! 
Does anyone have any idea where to source the stepdown converter in EU/internationally? Amazon shows it unavailable to me
Edit: Found it on banggood, search for DSP5005.
Does anyone have any idea where to source the stepdown converter in EU/internationally? Amazon shows it unavailable to me
Edit: Found it on banggood, search for DSP5005.
CanikUser19
Trenchtown Rock
I was able to program the M1 and M2 preset buttons after watching the video and reading through the manual. I’m at a loss trying to figure out how to program M0-M9 presets to make them functional. Seems like the values I put in as presets on M1-M9 don’t actually save, so when I scroll through using the potentiometer, the default voltage shows for all of the M presets. Seems like if nothing else, the preset values I have saved and are working as they should for button M1 and button M2 would show up when I use the scroll function, but they do not. I’m imagining using the potentiometer to quickly scroll through preset voltage settings when I want more options for quick voltage changes than the preset buttons M1 and M2 give me. Am I looking at this the right way? If so how do I program M0-M9 to work this way?
Last edited:
Sour Dream
Blue Dream enthusiast
def getting one or two of these
For those waiting on the black restock - should have more filament in soon! I have purple coming back as well 
vaporoufixtras
sigma vape enjoyer
Hey, any rough time estimate for complete kits?
I had a wholesale order out for the voltage converters which was cancelled by the wholesaler after going unfulfilled for a length of time. Will need to try again! Otherwise I'd have had them stocked by now. Sorry! Still trying.
Sour Dream
Blue Dream enthusiast
How’s it looking for completed units, I’m too lazy to build one myself lol
I don't have any listed but would be happy to make one for you if you want to DM me. I've entertained a few orders this way.
Sour Dream
Blue Dream enthusiast
Bet thanks
pxl_jockey
Just a dude
Super stoked about being on Red’s prebuilt list, this single ATM is going to simplify & improve using the herborizer, Atlas and WoodScents. The Vapbong will use its regular timer/power setup, since it‘s on the other side of my station. After stumbling across this thread, I couldn’t contact REFC Labs fast enough!
The ATM is a brilliant device that anyone with multiple 12v devices needs and Red is amazing, crazy prompt & has excellent communication skills. It was like dealing with one of my electronic hobby shops or any other well-run small business (that’s not in the cannabis industry)
One of the few exceptions out there that exist solely to prove the rule.
To be honest, I’m surprised more members aren’t buzzing about this bad mutha because I know loads of dudes that have multiple 12v heaters and the ATM is a clutter/cord killer before you even get to its performance benefits. If you‘ve got a dedicated vape station/den/room, this accessory seems like a no-brainer. But then, I’m a fool for accessories.
The ATM is a brilliant device that anyone with multiple 12v devices needs and Red is amazing, crazy prompt & has excellent communication skills. It was like dealing with one of my electronic hobby shops or any other well-run small business (that’s not in the cannabis industry)
One of the few exceptions out there that exist solely to prove the rule.To be honest, I’m surprised more members aren’t buzzing about this bad mutha because I know loads of dudes that have multiple 12v heaters and the ATM is a clutter/cord killer before you even get to its performance benefits. If you‘ve got a dedicated vape station/den/room, this accessory seems like a no-brainer. But then, I’m a fool for accessories.
Last edited:
I'm floored, thank you for such kind support! I'm thankful for the opportunity to provide joy to the communitySuper stoked about being on Red’s prebuilt list, this single ATM is going to simplify & improve using the herborizer, Atlas and WoodScents. The Vapbong will use its regular timer/power setup, since it‘s on the other side of my station. After stumbling across this thread, I couldn’t contact REFC Labs fast enough!
The ATM is a brilliant device that anyone with multiple 12v devices needs and Red is amazing, crazy prompt & has excellent communication skills. It was like dealing with one of my electronic hobby shops or any other well-run small business (that’s not in the cannabis industry)
To be honest, I’m surprised more members aren’t buzzing about this bad mutha because I know loads of dudes that have multiple 12v heaters and the ATM is a clutter/cord killer before you even get to its performance benefits. If you‘ve got a dedicated vape station/den/room, this accessory seems like a no-brainer. But then, I’m a fool for accessories.
The future is now; Everyone deserves a refined experience.I've had a number of requests for prebuilts and will probably add an item for a full prebuilt kit in the store. Will likely be a basic simplex offering first. Depends on how much extra time I can snag
4everpushingaboulder
Well-Known Member
Don’t forget black duplex shells!!I'm floored, thank you for such kind support! I'm thankful for the opportunity to provide joy to the community
I've had a number of requests for prebuilts and will probably add an item for a full prebuilt kit in the store. Will likely be a basic simplex offering first. Depends on how much extra time I can snag
I just added a few to stock last night
RustyOldNail
SEARCH for the treasure...
pxl_jockey
Just a dude
I’m glad that other folks are asking for prebuilt ATMs, makes me feel better 
Red emailed with great news last night so I’ll be rocking an ATM before you know it! So freakin’ impressed y’all.
Red emailed with great news last night so I’ll be rocking an ATM before you know it! So freakin’ impressed y’all.