Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
That looks like a variation, a vine pattern, there is a different floral pattern and I think I've seen a third even...
Tetra P80
- Thread starter funkyjunky
- Start date
That looks like a variation, a vine pattern, there is a different floral pattern and I think I've seen a third even...
Ripstar
Well-Known Member
Ok, this has been the question I have been wondering, thanks so much for answering! I can simply hit "custom" when a drop comes, then, go from there?
thunderstealer1337
Well-Known Member
If you do this email them the details soon/immediately, I missed the timeline on my custom engraving and now need to get in line for another drop.
Ripstar
Well-Known Member
So, do this BEFORE a drop? Or as soon as you order?
thunderstealer1337
Well-Known Member
reply to the email when you get the order confirmation/acknowledgement/verification
read the thread, even if you finished checkout it doesn't necessarily mean your purchase went through and you got that unit
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
If you are going to customize it further than the menu allows, then email them those customizations as soon as possible... because they will begin building, like the laser etch custom engraving is done first
Ripstar
Well-Known Member
Ok, thanks a lot for the info. I am going to re-read the thread again to make sure I am 100% for the next drop.
Awesome! Thanks, I assumed that's how it was done but wasn't completely sure. So many decisions! So, probably find my custom needs/wants now? ha!
gingerbier
Space Ranger
Yes! I like the intricacy of it.
VapeEnthusiast
Troy's Army
I accidentally dropped my Tetra Dual! 
There is a split in one of the wood panels but it doesn't go all the way down the side.
Is there a heat-safe wood glue that I can use to make a small repair? @funkyjunky
There is a split in one of the wood panels but it doesn't go all the way down the side.Is there a heat-safe wood glue that I can use to make a small repair? @funkyjunky
i use UHU wood glue but i guess any wood glue would do the job. the heater is sealed from the wood shell, so any glue is theoretically safe but the wood glue has the advantage that you can wipe off excess with a wet towel.
re: custom builds - you have a few days time to reply to the order with you special wishes after getting a custom slot. please leave a note in the order comments that it will be a custom design so i know already.
re: floral cut out pattern - there is only one but consists of three different panels each side
re: custom builds - you have a few days time to reply to the order with you special wishes after getting a custom slot. please leave a note in the order comments that it will be a custom design so i know already.
re: floral cut out pattern - there is only one but consists of three different panels each side
angular ocelot
Well-Known Member
hi! i have seen the heiroglyphics etched on some units but haven't seen the option on the site. should i get a custom slot and mention it there? thanks.i use UHU wood glue but i guess any wood glue would do the job. the heater is sealed from the wood shell, so any glue is theoretically safe but the wood glue has the advantage that you can wipe off excess with a wet towel.
re: custom builds - you have a few days time to reply to the order with you special wishes after getting a custom slot. please leave a note in the order comments that it will be a custom design so i know already.
re: floral cut out pattern - there is only one but consists of three different panels each side
exactly
Ripstar
Well-Known Member
Great to know about the custom process! thanks!i use UHU wood glue but i guess any wood glue would do the job. the heater is sealed from the wood shell, so any glue is theoretically safe but the wood glue has the advantage that you can wipe off excess with a wet towel.
re: custom builds - you have a few days time to reply to the order with you special wishes after getting a custom slot. please leave a note in the order comments that it will be a custom design so i know already.
re: floral cut out pattern - there is only one but consists of three different panels each side
thunderstealer1337
Well-Known Member
wow im getting 5 bowls with the 26a molicels
this is the only battery that gains battery % from the previous session, say it will end at like 45% then ill put it down and next hit its back up to 48% or something
barely getting 3/4 from my vtc6\hg2\30q
I wonder if this is just from super fresh new batteries
this is the only battery that gains battery % from the previous session, say it will end at like 45% then ill put it down and next hit its back up to 48% or something
barely getting 3/4 from my vtc6\hg2\30q
I wonder if this is just from super fresh new batteries
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
That actually happens to me all the time, using LG HE4, doesn't even need to be a new one... It must be the higher amp rating (a true 20A vs HG2 & 30Q which are 18A) which makes sense for your 26A cells too. I had been advised by @KeroZen in the past that if you are using a single cell mod like the P80, better to use batteries with the higher amp rating for optimal performance.
thunderstealer1337
Well-Known Member
Yea I didnt believe till I tracked 2 battery usages, i mainly cruise 90% time sometimes w2c, and i use cruise1 settings, below was my hit/temp range and battery %, id say i take around 15 sec draws, these were all used through water as well
sorry for chicken scratch, i didnt think id be sharing this lol
sorry for chicken scratch, i didnt think id be sharing this lol
thunderstealer1337
Well-Known Member
check your orders guys/gals my # 3982 is shipped 
Ghree-hee-heeezy
Member
Hey guys so my customs done!!
Custom p80
Custom p80
Hodge123
Member
@Ghree-hee-heeezy loving the look of your P80, enjoy........
Ghree-hee-heeezy
Member
Thanks so much! The excitement is unreal after seeing it
gingerbier
Space Ranger
Looks good. Is that mahogany?
Ghree-hee-heeezy
Member
Canary (:
