games-loaves0t
Well-Known Member
Does anyone know the difference between the Tetra Turbo Dual and the P80?
Tetra P80
- Thread starter funkyjunky
- Start date
GoldenBud
Well-Known Member
the dual has the same 4 coils heater
with the joyetech dual evic mod, that can also be single, it has wooden sleeve also for the single attachment, so you can choose between "Tetra Evic" single or dual battery
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Tubo* is what it is called, because originally it used that three rod heater, with Evic Dual mod (which comes with a single battery sled, where you load the battery into the sled and then attach it to the mod, along with dual battery, where you load them in at the top hatch more similar to TP80) but it was revised to incorporate the newer four-rod Tetra heater a few months before the Tetra P80 came out... So the difference lies with the form factor, the entire mod is different so it could perform a little differently, but the software firmware is the same, and it allows you to use two batteries, it has the older boxier style too... I have one of the Dual from that first Tetra run, custom Padauk (that I'm going to be selling here when my new TP80 arrives), I posted about it in the other thread below, which is technically the proper thread for this model, even if not quite proper since it has the old Tubo Evic and Dual too:
TUBO evic/dual
I see that you guys are having a ball here now that I revived this old thread 🤣🤣🤣. I just read moltentiger mention manual mode and wattage. Does it/tubo firmware support Temp control as well? Asking because I had a stempod si with only wattage control and o kept combusting. Yes the firmware...
fuckcombustion.com
farmerpalmersnt
Well-Known Member
My screens upside down too and the manual link appears to be missing 
Turn it off and hold down the volume up down buttons for a bit then turn it on, if I recall properly
there is a manual with the device
if not: https://shop.lamart.ch/manual
but to make it short: 5clicks fire to turn the device off, hold plus and minus buttons until screen flipped, 5clicks fire to turn back on.
if not: https://shop.lamart.ch/manualbut to make it short: 5clicks fire to turn the device off, hold plus and minus buttons until screen flipped, 5clicks fire to turn back on.
GoldenBud
Well-Known Member
easier from smartphones to get into this png, i couldn't load the pdf in my smartphone too.. security shit or so.. chrome
Last edited:
farmerpalmersnt
Well-Known Member
Ah yeah got that paper jobbie. Just no mention of a screen flip......
All sorted now, thanks for the solution guys
All sorted now, thanks for the solution guys
CanikUser19
Trenchtown Rock
Right under “button operations”Ah yeah got that paper jobbie. Just no mention of a screen flip......
All sorted now, thanks for the solution guys
farmerpalmersnt
Well-Known Member
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
This was one from the last drop, wonder if they ever even used it before selling it... (at a small profit seems as it was a bit over $400)
Edit: I see it over on the entexchange discord now too, where they are allowed to post additional comments about it, they say that they did use it once in fact, but cannot keep it... Also I see it comes with the micro cooler stem as well, so that is another $30 added to original cost with shipping, only small profit!
Last edited:
checkyourlibido
Well-Known Member
To a real man, a manual is always a last resort. And that's only if the productAh yes! That'll teach me to read the manual before I start testing
that’s not too bad. At least they don’t appear to have bought it to flip it. I refuse to buy from anyone that does that. I don’t want this turning into a Ticketmaster meta
PDX MALE
Member
I agree, $450 including shipping is very reasonable, especially considering it hasn't been used much,
if at all. I've seen at least a dozen pre-owned units in the past year or so, and very few were asking under $500,
not that I know what they actually sold for, they don't pop up all that often though.
maybe seller has an older unit he prefers
WoodVillain
Backwoods Rated
Mine has been delivered... wife has it at home. Unfortunately I won't be able to test it out until I get back to town this weekend.
gordontreeman
Everythings coming up Milhouse!
Stealth mode is not what you want as it powers off the display, but if you press fire and the temp up button simultaneously this opens the mod's settings menu. I don't remember everything in there, but IIRC there is a display brightness setting.
Its probably best to refer to Lamart's site for the manuals for most of these "how-to" questions, as they are asked every drop.
edit: I just pulled mine out to check quick. Its fire and the physical temp up button on the mod. This can be a bit confusing, as this is the temp down button if you haven't inverted the screen (the mod is in the wooden housing upside down). Contrast in the "Screen" submenu seems to adjust brightness.
Last edited:
Calvin_Fischoeder
Active Member
Just got my unit delivered and am in love with it!
Only taken 2 rips in on demand and cruise and got great results, can't wait to spend the time to try out the other settings. If this thing performs half as good as it looks I think it may sideline everything except my injectors for awhile!
Only taken 2 rips in on demand and cruise and got great results, can't wait to spend the time to try out the other settings. If this thing performs half as good as it looks I think it may sideline everything except my injectors for awhile!
HugoMaille
Member
me too, let me know if you ever want to give it a new home, cheers!
focalforlife
Well-Known Member
Beautiful unit! Good luck with it! Love the detail in the wood grains.Just got my unit delivered and am in love with it!
Only taken 2 rips in on demand and cruise and got great results, can't wait to spend the time to try out the other settings. If this thing performs half as good as it looks I think it may sideline everything except my injectors for awhile!
farmerpalmersnt
Well-Known Member
Gave it a bit of a fill and polish and shortened the glass stem for a better fit in the wood stem. Like the eye in the grain.
focalforlife
Well-Known Member
Very cool. Things to aspire too!
Gave it a bit of a fill and polish and shortened the glass stem for a better fit in the wood stem. Like the eye in the grain.
focalforlife
Well-Known Member
I love the pics. Really beautiful work! Congrats!
Secret
Member
Hello! Today, my Tetra P80 arrived! I thought my anxiety was bad waiting for it to arrive... however, it's even worse now. I'm actually afraid to even open it, as there's one question I don't have an answer to. Where will I store it in-between uses? I don't want to just leave it on the shelf exposed to dust and I don't think I should just keep it in a pocket in my backpack I use for outdoors.
Does anyone have any case suggestions? I would really appreciate it. Thank you!
Does anyone have any case suggestions? I would really appreciate it. Thank you!