-
SCAM WARNING! See how this scam works in Classifieds.
TC Box Mods Firmware Discussions and Customizing
KeroZen
Chronic vapaholic
For preservation purposes, I encourage you to download the latest .bin and NFEtools while Archive.org still exists here:
(they have been targeted by many huge lawsuits lately, from book publishers to music majors, so it could get pretty bad for them easily...)
(they have been targeted by many huge lawsuits lately, from book publishers to music majors, so it could get pretty bad for them easily...)
DJ Colonel Corn
The Vapor Ninja
oh wow really ?
damn.
that's such a shame, they did the community such great justice.
shoot.
keep us updated on that stuff can u ?
I have all the stuff u need to download should the archive not have what u need.
https://thevapor.ninja/2023/08/20/nfe-team-closes-their-site/
such a shame to see them go.
note: their STM32 branch page is still up: https://nfeteam.org/arcticfox/nightly/STM32/
also, the nightly builds page is still there: https://nfeteam.org/arcticfox/nightly/
Last edited:
Fesob_31
Well-Known Member
Arctic Fox - Aster RT
Tubo_myevic - eVic VTC Dual
Dna 100c - Lost Vape Thelema Solo
60 seconds session (heat soak) with the same 510 high mass device, 70W, TCR 105 (ss304), 255c on the coil, with almost the same power output.
Cold resistance is different for each mod.
With DNA the power delivered is available (763,88 mWh) and there is no need/possibility to tune the PID.
Last edited:
Vape Donkey 650
All vape, no smoke please.
Old thread...
I acquired some eleaf rim c 80w's to set up some DT rigs for some friends, but it seems these mods are no longer flashable to arcticfox when they are installed with the latest firmware from eleaf.
Does anyone know a work-around so I can flash the firmware on these recent mods? I have the most up to date copies of the AF software and cables and everything seems to work fine with my older mods, connecting to the AF software. So the issue is with these Rim C's I guess.....
Thanks
I acquired some eleaf rim c 80w's to set up some DT rigs for some friends, but it seems these mods are no longer flashable to arcticfox when they are installed with the latest firmware from eleaf.
Does anyone know a work-around so I can flash the firmware on these recent mods? I have the most up to date copies of the AF software and cables and everything seems to work fine with my older mods, connecting to the AF software. So the issue is with these Rim C's I guess.....
Thanks
Hippie
Well-Known Member
Are you using the beta stm32 version?
Vape Donkey 650
All vape, no smoke please.
yes, thanks for the repost, just to be sure. it is good that the AF software is still archived out there, for those that may need it still. It's still not recognizing the mods with that version of AF, but it did recognize my eleaf Rim (not C) with the fixed internal battery and I flashed that mod, so it's not an issue with my computer, cable or AF software.
I think the issue, from searching around the interwebs, is that the latest Rim C's that are pre loaded with the 1.1.2 version of the firmware, can no longer be recognized and flashed with the AF firmware updater, or presumably even the little eleaf firware update tool?
i hate to link to reddit, but that's all i can find on the topic
If anyone has any ideas or work-arounds, i'd appreciate it. If not, I got another two paperweights / mods to sell to friends for their 510 carts.
I think the issue, from searching around the interwebs, is that the latest Rim C's that are pre loaded with the 1.1.2 version of the firmware, can no longer be recognized and flashed with the AF firmware updater, or presumably even the little eleaf firware update tool?
i hate to link to reddit, but that's all i can find on the topic
If anyone has any ideas or work-arounds, i'd appreciate it. If not, I got another two paperweights / mods to sell to friends for their 510 carts.
DJ Colonel Corn
The Vapor Ninja
No, not me.
I only need the main ol' regular stuff
uhh
I don't much use my AF mods as much as my DNA mods.
However, I have plenty of AF mods that I share with folks.....
Got some killer RX 21700 and 20700 mods , love 'em, but I find myself using the DNA 100 hyperion for my dab needs.
Now that DNA has 'session mode', I am stoked !! (session mode is DNA's Autofire
)
i am coming back to the project because almost all vape fail on me for dif reason , even the vapcap cap is not doing click anymore , anyway the project is still around and is fine but my old Reuleaux RX200 the screen is dim and i want to see that other option are out there in 2025 for use the project
any ideas ?
@Pipes
thanks
any ideas ?
@Pipes
thanks
Haywood
Onward Thru the Fog
but I find myself using the DNA 100 hyperion for my dab needs.
Now that DNA has 'session mode', I am stoked !! (session mode is DNA's Autofire
I've been using a Steam Crave Hadron Mini (21700) with a DNA100 brain for dabs with a Quest Lightning heater. Other than it gets full of resin after a month and needs a full disassembly and soaking, the Lightning heater is by far the best of all of the Devine Tribe stuff I have for dabs (I have maybe 6 or so different DT heads going way back along with all kinds of heaters and a V4 and a V5)
But I digress (must be stoned). I have a really great theme I made (based loosely on Seedmasses version) that I never bothered to share. The presets are for a number of DT heads as well as a couple of oil carts. If you're interested, remind me where to upload it and I'll share it with you (and all).
Hey EQ, funny you should bring this up. I've had a Mighty II that I used for a couple of years and then got myself a TinyMight PH. An excellent vape indeed, like a Project but with a leash on it for much better temperature control. I've been using it for 8 months and was going to take it on my 2 week holiday in Jamaica, but it started to fail a week before departure. The Mighty isn't a good choice for flying, as the cooling unit isn't easily cleaned. I ended up grabbing one of my original Eraser Projects and used it with the glass TinyMight stems. I used it with an old Joyetech Cuboid which is still performing great. Running the modified firmware from years back. I can't find any decent mods that the firmware can be modified along with the PID programmable. All went well in Jamaica and no customs issues at all.
I now have my TinyMight back from warranty repair, and it is doing the job perfectly!!!
I did a quick google search and for the Cuboid is still available. Surprisingly.