Recent Acquisitions - Post Your New Pieces Here

arf777

arf777

No longer dogless
syrupy said:
RmdtN0Pl.jpg


wtf is 'ounce with no name'? That little box couldn't hold more than 3 grams, tops. On the back it says 'hash puppies', as if that is supposed to mean something too...:hmm:

Edit: Just found an invoice at the bottom of the EDIT box, says it's an ashtray. Ashes, what are those? Fuck combustion!
Click to expand...
An ounce of your soul?

Appears to be a reference to Clint Eastwood's "The Man with No Name" from A Fistful of Dollars, A Few Dollars More, and The Good, the Bad and the Ugly.
Which, given the weird-ass direction Clint has gone, makes me vote for ritual destruction even more. I'd burn the fucker (outdoors - i assume there'll be hideous fumes) in a pentagram while performing either Crowley's Rite of Horus, a Tibetan Buddhist exorcism or while invoking one of the Princes of the Presence. PM me for detailed instructions if needed.
 
Deadshort480

Deadshort480

We're here to fuck shit up.
So, since I purchased my Silika 10mm pendant piece I have become obsessed with 10mm mini pieces. I've got an Anodyne micro recycler inbound tomorrow, I've got a Slugworth/Goblin incycler pendant Raygun on order, and I just snagged this little guy from my LHS.

Made by Zoo Glass, this is actually my first piece with any type of worked glass. It sports what I believe is called a wigwag worked base, a worked dome, and a cool little Felix the Cat mili. It's a two hole diffy and a tiny but of water, but it smooths the vapor quite nicely and is big on flavor. Love these mini glass pieces!





Detail shot


 
SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
mvapes said:
John Madden Klein Recycler!

20140218_141411_zpsaw8uv7zw.jpg


20140218_144643_zpsswvicfvj.jpg


20140218_144649_zpsiif98msb.jpg


20140218_144704_zpsbuevo1d9.jpg


I don't know if I like the looney tunes yet. Worst case is their painted on, I'm sure I can dissolve it.
Click to expand...
Well, well, ya see what he did there he took the pipe zagged this way and that! Ahem I mean it starts out with a rabbit and a duck then "BOOM" vapor matriculated through the recycler like a running back scorned for the end zone. Then it all comes back where it started, like a kickoff. I mean ah ha hum that's recycling at its finest! I use mine on my giant Outback bus while munching on rabducken! I personally picked this pipe for my All Star team, but if you don't like the painting maybe pick up some tough actin Tinactin it gets the job done right! You can pick these items up at ACE the helpful place.
 
grokit

grokit

well-worn member
TheSkipper said:
This is the HT stand I had made by Sam at Glassblowersdirect. Just showed up today and it is made exactly to spec. I am so happy. Now my Gordon Scientific Recycler will be much easier to use.

cqOElf7l.jpg
uoSQO2rl.jpg
Click to expand...
That's really cool. What's sam charging for a piece like that these days?
 
grokit,
PhotoRider

PhotoRider

Diagnosed with level 11 G.A.S.
TheSkipper said:
This is the HT stand I had made by Sam at Glassblowersdirect. Just showed up today and it is made exactly to spec. I am so happy. Now my Gordon Scientific Recycler will be much easier to use.

cqOElf7l.jpg
uoSQO2rl.jpg
Click to expand...
could you explain why this makes it user for use on the EVO? can't the recycler just put on the EVO w/o that piece?
 
PhotoRider,
  • Like
Reactions: mvapes
mvapes

mvapes

Scratchin' Glass!
Accessory Maker
PhotoRider said:
could you explain why this makes it user for use on the EVO? can't the recycler just put on the EVO w/o that piece?
Click to expand...

To me it looks like he found a way to turn a stand into a functional piece so the HT can be used now as a stemless recycler. That HT is definitely dope but I would worry about leverage on the EVO.

My advice, don't let go... :uhoh:
 
TheSkipper

TheSkipper

Smooth sailing while I'm inhaling... VAPOR
PhotoRider said:
could you explain why this makes it user for use on the EVO? can't the recycler just put on the EVO w/o that piece?
Click to expand...
That recyclers joint is recessed too high into the piece for it to fit correctly on the EVO thusly it does not seal or work properly that way, so I had the stand made. Also its super heavy with all that water in it and I am afraid to put that much weight o the joint of my EVO.

Not to mention I am very used to using my EVO this way as its how I have always done it with my mobius. I am a big fan of the stemless 90 degree pieces with the EVO, very easy to use with a cloudbuddy :)

mvapes I am confused by what you mean by this: but I would worry about leverage on the EVO.
mvapes said:
but I would worry about leverage on the EVO.

My advice, don't let go... :uhoh:
Click to expand...
My advice, don't let go... :uhoh:

Can you please clarify? Thank You :) Also that Klein is ridiculous. And i like the looney toons:rofl:
 
Last edited:
Frederick McGuire

Frederick McGuire

Aggressively Loungey
TheSkipper said:
My advice, don't let go... :uhoh:

Can you please clarify? Thank You :) Also that Klein is ridiculous. And i like the looney toons:rofl:
Click to expand...

My understanding is that He's worried about the weight of an EVO on that joint.

"Don't let go" (of the EVO while you're using that piece)

mvapes said:
To me it looks like he found a way to turn a stand into a functional piece so the HT can be used now as a stemless recycler. That HT is definitely dope but I would worry about leverage on the EVO.

My advice, don't let go... :uhoh:
Click to expand...
My personal opinion on "functional" pieces is that natty percs don't get any respect.
To me, that piece looks like a waste of potential.

I've got a very similar piece, but with an inline perc, and that just makes more sense to me. (Though I guess obviously it would, I had it custom made :lol:)

If its purely for clearance I'd personally get a custom cloud buddy made, just swap the male and female joint location - boom hydratube buddy.
I would think that'd be cheaper than that base, but it wouldn't replicate using the cloud inverted.

(Note to @TheSkipper, I'm not trying to diss your piece specifically, its just not my style at all.
If it does what you want that's all that matters at the end of the day :))
 
mvapes

mvapes

Scratchin' Glass!
Accessory Maker
TheSkipper said:
That recyclers joint is recessed too high into the piece for it to fit correctly on the EVO thusly it does not seal or work properly that way, so I had the stand made. Also its super heavy with all that water in it and I am afraid to put that much weight o the joint of my EVO.

Not to mention I am very used to using my EVO this way as its how I have always done it with my mobius. I am a big fan of the stemless 90 degree pieces with the EVO, very easy to use with a cloudbuddy :)

mvapes I am confused by what you mean by this: but I would worry about leverage on the EVO.

My advice, don't let go... :uhoh:

Can you please clarify? Thank You :) Also that Klein is ridiculous. And i like the looney toons:rofl:
Click to expand...

Recyclers can easily be top heavy, especially when one is as tall as yours. My comment about not letting go was purely meant to protect that baby. Don't take your hands off of it while on the evo cause if she tips... :disgust:

Thanks for the compliment too, I love the idea of an HT recycler. :tup:
 
TheSkipper

TheSkipper

Smooth sailing while I'm inhaling... VAPOR
Frederick McGuire said:
My understanding is that He's worried about the weight of an EVO on that joint.

"Don't let go" (of the EVO while you're using that piece)


My personal opinion on "functional" pieces is that natty percs don't get any respect.
To me, that piece looks like a waste of potential.

I've got a very similar piece, but with an inline perc, and that just makes more sense to me. (Though I guess obviously it would, I had it custom made :lol:)

If its purely for clearance I'd personally get a custom cloud buddy made, just swap the male and female joint location - boom hydratube buddy.
I would think that'd be cheaper than that base, but it wouldn't replicate using the cloud inverted.

(Note to @TheSkipper, I'm not trying to diss your piece specifically, its just not my style at all.
If it does what you want that's all that matters at the end of the day :))
Click to expand...
Iam not offended. I appreciate the input but the truth is I considered adding an inline:lol:. I had a few other reasons for this having no perc though. 1) With my VXL mouth piece it makes a very ergonomic dry sublimator tube. 2) This makes dry hits with the EVO much smoother 3) I find the EVO more effective and cleaner inverted when using concentrates. 4) It has plenty of uses for experiments. Well I guess I could do all that with a perc but this is what I wanted and I do love it:love:

mvapes said:
Recyclers can easily be top heavy, especially when one is as tall as yours. My comment about not letting go was purely meant to protect that baby. Don't take your hands off of it while on the evo cause if she tips... :disgust:

Thanks for the compliment too, I love the idea of an HT recycler. :tup:
Click to expand...
Thanks for the concern but the base is real wide and thick and it is very stable. But you are right. I should always be prepared:D Thanks it works great I just wish it had worked directly on top of the EVO... then SM started talking about releasing HT cyclers... oh well :rofl:
 
Last edited:
You must log in or register to reply here.
Top Bottom