Discontinued Pinnacle Pro

CarolKing

Singer of songs and a vapor connoisseur
I use the glass pipe screens that they are getting on the Ascent forum. They are shaped like flowers with a little stem. I ordered mine off of Amazon.

Some in the FC community are using the glass pipe screens inside the Ascent for heat distribution and take up some space in the Ascent's bowl (bowl is a bit big).

The pipe screens fit perfectly on top of the cotton in the Pinnacle Pro bullets. It helps to keep the pong screen clean.
Sativape was talking about it on the previous page. People helping people, that's what it's all about .
Thanks guys
 
Last edited:

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Yup, I've used both the flower and the glass honeycombs and they both work great! The kief molds around it a bit and does a great job at not cluttering up the screen.
 

chimpybits

Well-Known Member
I use the glass pipe screens that they are getting on the Ascent forum. They are shaped like flowers with a little stem. I ordered mine off of Amazon.

Some in the FC community are using the glass pipe screens inside the Ascent for heat distribution and take up some space in the Ascent's bowl (bowl is a bit big).

The pipe screens fit perfectly on top of the cotton in the Pinnacle Pro bullets. It helps to keep the pong screen clean.
Sativape was talking about it on the previous page. People helping people, that's what it's all about .
Thanks guys
OK, I still don't know which screens, but I see that these flower shaped glass screens are a category of things made for small smoking pipes. So, there are a number of similar suitable glass screens.

Are yours like these: http://www.amazon.com/Glass-Tobacco-Screens-Daisy-Flower-Style-20pcs/dp/B009UZ0QAU/ref=pd_sim_sg_2 ?
 
Last edited:

Valstar

New Member
Got my PnP DLX friday. First thing : theyoyokid1 is the best seller I've ever had on ebay ! Super fast response on every questions (and I had a few, since ebay was blocking me from seeing most of his stuff, damn ebay), fast sending with the right options, and a little gift inside the box that was really surprising but appropriate ! So everyone, don't hesitate for a second, go for theyoyokid1, he's the one !

So, I have Moroccan and no weed for the moment. I tried in the Full Metal Jacket (FMJ), but it was no efficient at all. I have to do further testing for that, but a small amount of hash, with nothing more, in the FMJ, don't work for me. I was hoping this would be my main way of vaping Hash, so if anyone have any advice about this, this would be greatly appreciated, else I will do some tests by myself.

So, I tried to put a really small amount of tobacco in the regular Bullet, packed it, then added the Hash mixed in another really small amount of tobacco (I would say that there his 1/7 - 1/8 of a cigarette in total). This was up to 3/4 of the bullet. I started by vaping at 4, with the mouthpiece, and was surprised to get really decent clouds, almost like smoking a real joint. The taste is really strong. I started get less flavor around half of the session. The effects were really nice, not the same as a regular joint, I can't really explain why. Seemed less "medicated" but when you start to really pay attention, you notice that you're really high. As with a good weed I would say. Then I finished off the bullet at 5.
When I cleaned off the bullet, it was mostly dark matter that was really dry (my hash is pretty much oily).

I've done few like that the day after too. Tried the watertool once and it was really nice, but I would say that the mouthpiece does the trick too without a problem (even if it's getting a little hot but not enough to be painful on your lips). The only thing is that my mouthpiece don't fit completely in the PnP, there's a ridiculously small gap, but that doesn't change anything in the vaping experience, it's just a cosmetic thing. I like the fact that you can draw it fast, slow, no matter how, it works, so no learning. Wife was able to try it without me explaining anything too.

Today, I thought it could probably work with a lesser temp, so I tried it on 3, going to 4 for the second session. It was really nice too, and with less "dark matter", so I assume it's probably better this way than the 4-5 one.

I'm pretty sure I forget some things I wanted to say, but that's already a pretty long post, so thank you all for making me chose this vape, thanks VaporBlunt for making it, and thanks again theyoyokid1 for being such a super seller ! :)
 

pakalolo

Toolbag v1.1 (candidate)
Staff member
Got my PnP DLX friday. First thing : theyoyokid1 is the best seller I've ever had on ebay ! Super fast response on every questions (and I had a few, since ebay was blocking me from seeing most of his stuff, damn ebay), fast sending with the right options, and a little gift inside the box that was really surprising but appropriate ! So everyone, don't hesitate for a second, go for theyoyokid1, he's the one !

So, I have Moroccan and no weed for the moment. I tried in the Full Metal Jacket (FMJ), but it was no efficient at all. I have to do further testing for that, but a small amount of hash, with nothing more, in the FMJ, don't work for me. I was hoping this would be my main way of vaping Hash, so if anyone have any advice about this, this would be greatly appreciated, else I will do some tests by myself.

So, I tried to put a really small amount of tobacco in the regular Bullet, packed it, then added the Hash mixed in another really small amount of tobacco (I would say that there his 1/7 - 1/8 of a cigarette in total). This was up to 3/4 of the bullet. I started by vaping at 4, with the mouthpiece, and was surprised to get really decent clouds, almost like smoking a real joint. The taste is really strong. I started get less flavor around half of the session. The effects were really nice, not the same as a regular joint, I can't really explain why. Seemed less "medicated" but when you start to really pay attention, you notice that you're really high. As with a good weed I would say. Then I finished off the bullet at 5.
When I cleaned off the bullet, it was mostly dark matter that was really dry (my hash is pretty much oily).

I've done few like that the day after too. Tried the watertool once and it was really nice, but I would say that the mouthpiece does the trick too without a problem (even if it's getting a little hot but not enough to be painful on your lips). The only thing is that my mouthpiece don't fit completely in the PnP, there's a ridiculously small gap, but that doesn't change anything in the vaping experience, it's just a cosmetic thing. I like the fact that you can draw it fast, slow, no matter how, it works, so no learning. Wife was able to try it without me explaining anything too.

Today, I thought it could probably work with a lesser temp, so I tried it on 3, going to 4 for the second session. It was really nice too, and with less "dark matter", so I assume it's probably better this way than the 4-5 one.

I'm pretty sure I forget some things I wanted to say, but that's already a pretty long post, so thank you all for making me chose this vape, thanks VaporBlunt for making it, and thanks again theyoyokid1 for being such a super seller ! :)

Moroccan and other pressed hashes don't vapourize well because the process works better with increased surface area, which is why we grind our buds. You will get better results if you break the hash up. The blond Moroccan I remember from my misspent youth was actually easy to break down. With a little gentle heat I could turn it back into the kief it came from. Not all hashes will separate that easily, but if it's at all grainy then you should be able to do this. I've never tried grinding hash but that might work.

The difference in effect has been much discussed all over FC. Basically you are missing the toxic effects of combustion by-products such as carbon monoxide. Stay away from smoking and vapourize for a week or so and you will not miss them at all, in fact you'll probably be grateful to avoid them. Most of us at FC avoid combustion and would never go back to it. We have a few recalcitrants but we're working on them. ;)
 

Valstar

New Member
I melt my hash, sorry I hadn't been clear enough, I break it in tiny pieces with my nails :)

For the effect, that's what I've thought, will see ;)
 

Sativape

Well-Known Member
Hi all,
First post so be gentle :)
I found the perfect case for the PNP, it is a nice quality leather pen case. You just need to cut out the pen strap inside and it fits perfectly. Low price, great zipper, feel and size. Still pocketable and space for a spare bullet. Enjoy.

xPJpxYr.jpg



ayop4Bw.jpg




Here is where I got it: http://www.penblanks.ca/High-End-Genuine-Leather-pen-pouch/

@ Sacrifus,

How has the pen case been holding up for the PNP?
This thing looks PIMP!
Curious if the MP has enough room to pop off? Or is it snug enough to keep in it place.

I've been using a very wide rubber band to hold the MP onto the PNP while travelling.
I just slide the band down to base of the unit while in use... it acts as a grip....
The wide band has been holding up really good.
The PNP got banged around in my pocket and I thought for sure the MP popped off and my herbs got scattered in my pocket... but fortunately it was still in place.

I've been pulling the band down over the LEDs to keep from being a beacon when using the PNP.

Also, I should mention that I make sure not to cover the vent holes at the base of the PNP with te band.

@ Luv2Vape,

I've also been using the pill case to carry loaded bullets.

http://fuckcombustion.com/threads/pinnacle-pro.10651/page-59#post-471391

I've been loading the bullets and wrapping the tops with a 1.5" x 1.5" piece of glad / saran wrap.
I wrap it around 1/2" below the flange, then twist the rest above the bullet into a saran string.
I tuck the string into the lid when I close it up..
When it's time to open it, the string lets me pull out the bullet with ease.
No mess and efficient.


BTW, I just found this review of the PNP on youtube:


He shows the PNP in action.
 
Last edited:

Ratm22

Cloud Transcender
My Pinnacle Pro's charger wont make connection anymore. :huh:

Hopefully they will replace easily, I will try contacting them directly.
 

Francisco93

Member
theyoyokid1 is out i think.
gotvape.com is not replying to my mail regarding a shipping concern i had.
i think i will wait for christmas sale.
 
Francisco93,

GreenRoom

Well-Known Member
I've had the PNP for a couple months now and the only drawbacks I found were loose fitting top and the flat mouthpiece tip gets clogged with resin easily. That's it. I love it and would buy another in a hot second.
I occasionally go back to my DV only because the vapor is richer and thicker, and it's instant. It seems that I have to wait for the PNP to start producing thick vapor ever after it reaches temp, maybe halfway into a session. I almost put flowers directly in the PNP chamber to see if it's like the DV.........almost. I may do it someday but I'll definitely put a screen at the bottom of the oven.
 

CarolKing

Singer of songs and a vapor connoisseur
@Engineering I was wondering if some of the Pinnacle Pros have a built in slit in the sleeve area, to prevent the material it's made of from splitting from the heat?

Both Gotvape and EZvapes mentioned that to me.
 
Last edited:
CarolKing,
Top Bottom