Yes all PHASE3 gear is compatible with CH electronics.
The CH post should work, I know people were using them with O’Connell stands as well.
The included stand is of the simpler bent aluminum style stands.
-
SCAM WARNING! See how this scam works in Classifieds.
Phase3 Vaporizers
- Thread starter invertedisdead
- Start date
Yes all PHASE3 gear is compatible with CH electronics.
The CH post should work, I know people were using them with O’Connell stands as well.
The included stand is of the simpler bent aluminum style stands.
Alligator427
Well-Known Member
Thanks for your reply. I will maybe take one if pre-order still available at the end of this month.
Chicken No Name
Dazed and confused
Bodged together a stand for the zx from a CH stand and a reducer or chopped downstem.
In my case I cut the downstem so I had just the top. As this was a slightly loose fit I wrapped with PTFE/teflon tape to create a snug fit. Note: I have 3 Ch stands and all had a different id so be aware when fitting the glass.
Seems to work fine.
My only concerns are:
Thermal expansion of 3 different materials. I don't want the zx head to crack. So far no sticking of zx to glass. Slides out easy.
PTFE tape over heating. Safe op temp is advertised as 500f, which is what I have my pid at. But that is the coil temp, and not how hot the head gets. Using my infrared thermometer the hottest part of the glass interface is 200f and the Ch stand doesn't get hotter than 100f so I think the PTFE tape is fine.
Been using a few days now and no issues so far with sticking head or smells from PTFE tape.
In my case I cut the downstem so I had just the top. As this was a slightly loose fit I wrapped with PTFE/teflon tape to create a snug fit. Note: I have 3 Ch stands and all had a different id so be aware when fitting the glass.
Seems to work fine.
My only concerns are:
Thermal expansion of 3 different materials. I don't want the zx head to crack. So far no sticking of zx to glass. Slides out easy.
PTFE tape over heating. Safe op temp is advertised as 500f, which is what I have my pid at. But that is the coil temp, and not how hot the head gets. Using my infrared thermometer the hottest part of the glass interface is 200f and the Ch stand doesn't get hotter than 100f so I think the PTFE tape is fine.
Been using a few days now and no issues so far with sticking head or smells from PTFE tape.
Fearless Disaster
Well-Known Member
this fits the ch hangar stand. its a little tight but nothing that bothers me:
SKO Post
made with Grade 2 Titanium This stand is designed to shed as much heat as possible to avoid the heat getting down to the base and heating or damaging it. Suitable for use with the CH aluminum bases. Fits the SKO nicely, as well as possibly other 14mm injector heads. Post dimensions: 16 x 16 x 48mm
i love this idea! i have some reducers on the way, maybe i will try this! minus the ptfe tape maybe some high temp silicone might work depending on the temp ratingBodged together a stand for the zx from a CH stand and a reducer or chopped downstem.
In my case I cut the downstem so I had just the top. As this was a slightly loose fit I wrapped with PTFE/teflon tape to create a snug fit. Note: I have 3 Ch stands and all had a different id so be aware when fitting the glass.
Seems to work fine.
My only concerns are:
Thermal expansion of 3 different materials. I don't want the zx head to crack. So far no sticking of zx to glass. Slides out easy.
PTFE tape over heating. Safe op temp is advertised as 500f, which is what I have my pid at. But that is the coil temp, and not how hot the head gets. Using my infrared thermometer the hottest part of the glass interface is 200f and the Ch stand doesn't get hotter than 100f so I think the PTFE tape is fine.
Been using a few days now and no issues so far with sticking head or smells from PTFE tape.
Alligator427
Well-Known Member
I have the one from CH for the flowerpot that have a 2.9cm ID and the "new" one for the injector with more or less 1.8cm ID
Alligator427
Well-Known Member
Sorry, I would wrotte 1.9cm ID for the flowerpot stand.
PHASE3 ZXL [18MM] 2025 Plug-&-Play Bundle
PREORDER - Estimated Ship Date July 1, 2025 Since our 2019 inception of the original purpose built sapphire & ruby ball vaporizer, PHASE3 has continually innovated and pioneered an increasing number of industry firsts for the sole purpose of crafting a superior enthusiast experience. Ball Vaping...
www.gophase3.com
Heads up Z Team, the 2025 ZXL is still available for preorder right now and I've been optimistic to see the tide turn, but as of right now we're not even close to our small goal so there's a pretty good chance this will get pulled down. Gonna run it through the weekend and see if anything picks up but as of now it is what it is.
I realize posting this would likely make people even more skeptical to place a preorder but transparency matters and this is the current state of things.
ZX sales have been getting hit super hard lately too so I appreciate everyone supporting the original gemstone ball vape
ZX's and 3 shelf bowls are on order and set for delivery next month.
ZXXL handles are being revised. Thank you for your patience and cooperation.
I apologize for the extended delays but I would much rather send out something we're all happy with than fumble at the 1 yard line.
Working on new stuff as always -wireless stand is now looking really cool, I spent yesterday redesigning it for better aesthetics and I'm pretty stoked on this one. Just waiting on a revised price quote on that and if it fits within my scope I'll make a new thread for those since its fits a larger scope of uses than my normal product line.
Also I've been cueing up a new full ceramic TED design based on my PHASE3 ELEMENT to try and hit an accessible price point while also hitting a number of feature points. The idea is to simplify the concept and design to the lowest common denominator to keep costs down and just try to do something that performs well that anybody can get ahold of.
Cheers friends and FC family
Fearless Disaster
Well-Known Member
i'm in for that ted, either as the original ted or as a more generic 8mm ecosystem thing. imo simple ceramic versions of glass teds / ted stems / tm2 stems are a huge win. i'm always sad to have to come up with some kind of metal or wood solution for out and about.PHASE3 ZXL [18MM] 2025 Plug-&-Play Bundle
PREORDER - Estimated Ship Date July 1, 2025 Since our 2019 inception of the original purpose built sapphire & ruby ball vaporizer, PHASE3 has continually innovated and pioneered an increasing number of industry firsts for the sole purpose of crafting a superior enthusiast experience. Ball Vaping...
Heads up Z Team, the 2025 ZXL is still available for preorder right now and I've been optimistic to see the tide turn, but as of right now we're not even close to our small goal so there's a pretty good chance this will get pulled down. Gonna run it through the weekend and see if anything picks up but as of now it is what it is.
I realize posting this would likely make people even more skeptical to place a preorder but transparency matters and this is the current state of things.
ZX sales have been getting hit super hard lately too so I appreciate everyone supporting the original gemstone ball vape
ZX's and 3 shelf bowls are on order and set for delivery next month.
ZXXL handles are being revised. Thank you for your patience and cooperation.
I apologize for the extended delays but I would much rather send out something we're all happy with than fumble at the 1 yard line.
Working on new stuff as always -wireless stand is now looking really cool, I spent yesterday redesigning it for better aesthetics and I'm pretty stoked on this one. Just waiting on a revised price quote on that and if it fits within my scope I'll make a new thread for those since its fits a larger scope of uses than my normal product line.
Also I've been cueing up a new full ceramic TED design based on my PHASE3 ELEMENT to try and hit an accessible price point while also hitting a number of feature points. The idea is to simplify the concept and design to the lowest common denominator to keep costs down and just try to do something that performs well that anybody can get ahold of.
Cheers friends and FC family
That's exactly what I did was convert it to a more open 8MM ecosystem.
The heater and stem are now two different parts which brings up some cool possibilities working with different materials thermal properties or mixing and matching with other equipment.
Cooling could be further increased with an optional part.
I think this one could be pretty compelling for my hash enthusiasts as well
Pukka
Well-Known Member
No, not allowed ;-{>=== I'm on the bus and won't get off ...
XoGnosis
Member
ZXL pre-order - i still need to put mine in, but will have to wait until I'm home on the 4th. Count on it though, it's a 100% commitment.PHASE3 ZXL [18MM] 2025 Plug-&-Play Bundle
PREORDER - Estimated Ship Date July 1, 2025 Since our 2019 inception of the original purpose built sapphire & ruby ball vaporizer, PHASE3 has continually innovated and pioneered an increasing number of industry firsts for the sole purpose of crafting a superior enthusiast experience. Ball Vaping...
Heads up Z Team, the 2025 ZXL is still available for preorder right now and I've been optimistic to see the tide turn, but as of right now we're not even close to our small goal so there's a pretty good chance this will get pulled down. Gonna run it through the weekend and see if anything picks up but as of now it is what it is.
I realize posting this would likely make people even more skeptical to place a preorder but transparency matters and this is the current state of things.
ZX sales have been getting hit super hard lately too so I appreciate everyone supporting the original gemstone ball vape
ZX's and 3 shelf bowls are on order and set for delivery next month.
ZXXL handles are being revised. Thank you for your patience and cooperation.
I apologize for the extended delays but I would much rather send out something we're all happy with than fumble at the 1 yard line.
Working on new stuff as always -wireless stand is now looking really cool, I spent yesterday redesigning it for better aesthetics and I'm pretty stoked on this one. Just waiting on a revised price quote on that and if it fits within my scope I'll make a new thread for those since its fits a larger scope of uses than my normal product line.
Also I've been cueing up a new full ceramic TED design based on my PHASE3 ELEMENT to try and hit an accessible price point while also hitting a number of feature points. The idea is to simplify the concept and design to the lowest common denominator to keep costs down and just try to do something that performs well that anybody can get ahold of.
Cheers friends and FC family
3 shelf zx bowl - will you have extras available for straight purchase?
element-ish 8mm vape - yes please. I really like the TED form factor and really wanted the ceramo to be what I imagine a full ceramic TED could be - I would love to see what you come up with in that space.
add1noob
Well-Known Member
@invertedisdead hey I got a quick question. I tried to search through the pages here but did not have much luck. If I recall correctly you now use 8MM ruby balls in your ZX right? If you’re not using the stock balls, could you let me know what you’re using now and the approximate amount of balls? My goal is to have a slower temp ramp up but not so much so that I still can’t finish it in one hit on the top screen.
Everyone feel free to chime in with your own experiments too. Considering the ZX has been out for quite some time now I’m sure some people here have got some pretty naughty secrets.
Everyone feel free to chime in with your own experiments too. Considering the ZX has been out for quite some time now I’m sure some people here have got some pretty naughty secrets.
Alligator427
Well-Known Member
I am waiting my salary before to pre-order the zxl. Beginning next week : monday or tuesday.
But I don't want to pre-order for nothing because I have to pay extra cost with € to $. Let me know your decision.
But I don't want to pre-order for nothing because I have to pay extra cost with € to $. Let me know your decision.
Last edited: