JoDa Glassworks
- Thread starter VaPeD&CoNfUsEd
- Start date
Reflections
Well-Known Member
Damn VaPeD&CoNfUsEd those are pretty cool..I think I'll have to limit my visits here or I will want a stem of each design you do!!
TeeJay1952
Well-Known Member
How much for a multi pack?
@TeeJay1952 Depends on what all you want. I always hook up the fat deals for my FC fam!
@Reflections there like Pokemon. You gotta collect them all! Lol
@Reflections there like Pokemon. You gotta collect them all! Lol
TeeJay1952
Well-Known Member
I am in Metro detroit area. (Taylor) Are you located anywhere near? (roadtrip)
I'm probably 40 minutes from you.
Jackson area. Are you familiar with it?
Would love to have a fellow fc'er stop by and check out the setup.
Jackson area. Are you familiar with it?
Would love to have a fellow fc'er stop by and check out the setup.
Last edited:
TeeJay1952
Well-Known Member
Thanks for invite but I am older fellow and tend to stick to smaller circles.
Right on. Well if you happen to place an order at some point atleast it will reach you really fast.
TeeJay1952
Well-Known Member
Reminds me of fondue forks with colored tips. Everyone gets their own color. Nice for party. Should I go to website to order ?
Nope just shoot me a message. I don't have a website.........yet.
TeeJay1952
Well-Known Member
OK I'll take 3.
Anyone (difference is the main thing)
May I mail you a check?
I will send and wait. Not in a hurry or worry.
Don't have Paypal or Communist mailing service.
I am unclear as to this exchange process. I don't want to post address or email. Is there a private function?
Anyone (difference is the main thing)
May I mail you a check?
I will send and wait. Not in a hurry or worry.
Don't have Paypal or Communist mailing service.
I am unclear as to this exchange process. I don't want to post address or email. Is there a private function?
I'll send you a message right now.
@TeeJay1952 Click on @VaPeD&CoNfUsEd avatar. Then click on "start a conversation "
@TeeJay1952 just check your inbox I sent you a private message.
Reflections
Well-Known Member
Just got my order in the mail today when got home..thanks VaPeD&CoNfUsEd....Proud to own your first set that you made..smiles im really digging them..and you made me feel extra special with the gift..I really needed to feel special 
been one of those weeks...hugs thanks
been one of those weeks...hugs thanks
Also here's the last drip stem that I had done. Had to wait for the color to strike just right in the kiln. Still gotta cut it down, size it, and polish the lip.
Amber purple!!!!!! God I love this gorgeous fucking color. As per usual I apologize for the terrible iphone pics. But if it's that pretty in the shitty pic then just imagine what I'm seeing in person.
@Reflections well I hope I helped brighten your day. Thanks for the kind words.
Amber purple!!!!!! God I love this gorgeous fucking color. As per usual I apologize for the terrible iphone pics. But if it's that pretty in the shitty pic then just imagine what I'm seeing in person.
@Reflections well I hope I helped brighten your day. Thanks for the kind words.
Last edited:
In the works, yes. Just been so busy filling nano orders. Getting ready to move on to some solo stuff next week. Then UD stuff and some ssv stuff.
Reflections
Well-Known Member
OMG..2 of my fav colors lol..and yes You DID!!!
°k
The sound of vapor
Hi @VaPeD&CoNfUsEd
First of, waow! congratulations on your work man!
I'm not too much into flashy, funky glass work (I'm more of a minimal/discreet design guy) but I'm impressed by how you're pulling this out on your own (that includes the wifey support of course), I'm also pretty sure that if you can make "extravagant" pieces, you can certainly make some that are more to my tastes (that'd be for later this year I hope as I'm looking into getting a custom log vape, not sure which one yet though).
I'm also happy for you to see all the good vibes you receive from our fellow FC'ers here.
Now enough with the praises and let's talk business!
I'm wondering if you can also make some spacers (possibly with some left over from your stem work which would make it even better). I'm getting tired of the glass flowers I have to use with my Ascent and I think you could have a few customers around here for this type of piece if you price it right (like you seem to do). I'm also hearing lots of complaints about the Pax oven being too big so I'm guessing you'd also have customers on that side.
Of course the spacer would have to be plain uncoloured glass (at least imo) but I don't think it'd have to fit too snugly and (I don't know how you'd make it so it's pure assumption but) maybe you could even get a mould done and easily recycle stems ends this way? => efficiency in the workshop and efficiency in the vape bowl/oven, how wonderful would that be?
Then again this might just be another silly suggestion of mine but if it were something possible I'd certainly buy a few of these from you. I believe you own or have owned an Ascent so you should have a pretty good idea of what's needed but I'd also be happy to help with the design of this spacer if you'd like to have a future customer opinion. As a matter of fact ideas are starting to fly in my head as I'm writing this! but shush... let's take this in PM I can feel people are watching...
First of, waow! congratulations on your work man!
I'm not too much into flashy, funky glass work (I'm more of a minimal/discreet design guy) but I'm impressed by how you're pulling this out on your own (that includes the wifey support of course), I'm also pretty sure that if you can make "extravagant" pieces, you can certainly make some that are more to my tastes (that'd be for later this year I hope as I'm looking into getting a custom log vape, not sure which one yet though).
I'm also happy for you to see all the good vibes you receive from our fellow FC'ers here.
Now enough with the praises and let's talk business!
I'm wondering if you can also make some spacers (possibly with some left over from your stem work which would make it even better). I'm getting tired of the glass flowers I have to use with my Ascent and I think you could have a few customers around here for this type of piece if you price it right (like you seem to do). I'm also hearing lots of complaints about the Pax oven being too big so I'm guessing you'd also have customers on that side.
Of course the spacer would have to be plain uncoloured glass (at least imo) but I don't think it'd have to fit too snugly and (I don't know how you'd make it so it's pure assumption but) maybe you could even get a mould done and easily recycle stems ends this way? => efficiency in the workshop and efficiency in the vape bowl/oven, how wonderful would that be?
Then again this might just be another silly suggestion of mine but if it were something possible I'd certainly buy a few of these from you. I believe you own or have owned an Ascent so you should have a pretty good idea of what's needed but I'd also be happy to help with the design of this spacer if you'd like to have a future customer opinion. As a matter of fact ideas are starting to fly in my head as I'm writing this! but shush... let's take this in PM I can feel people are watching...
I'll see what I can come up with on the spacer front. Feel free to pm me any design ideas you may have in mind.
On another note, I still have these 2 left.
Half blood and amber purple.
Or if there's a color that you don't see but want then let me know.
27$ each.
I'll be making some gongs in this style over the weekend as well.
Also I've sourced a broken solo and a solo stem so keep your eyes here over the next week or so.
On another note, I still have these 2 left.
Half blood and amber purple.
Or if there's a color that you don't see but want then let me know.
27$ each.
I'll be making some gongs in this style over the weekend as well.
Also I've sourced a broken solo and a solo stem so keep your eyes here over the next week or so.
2clicker
Observer
good shit!
Caligula
Maximus
@VaPeD&CoNfUsEd have you considered pulling dabbers? Seems like it would be rather easy to do and would have some use for a lot of folks here?
I make quite a few Dabbers. As a matter of fact I just put one in a package to @blankrider as a free gift. It was one of my shatter Dabbers. I don't have any pics of it. Maybe @blankrider would be so kind as to post one of his.
