JoDa Glassworks

[flotntoke]

Oh man!! Another gorgeous piece!!!!!!

Really love the swirls (twists?) and the swiss percs to keep water in control in both of these. Have a similar inline with triple donut that I love to use for vaping. Nowhere near as nice as either of these lovelies, though. Very easy to maintain flavor while vaping with one of these by keeping the draw slow until you clear, and love doing dabs from mine.

That swiss perced mouthpiece is truly a thing of beauty, too! Great work!!

 

[subway13029]

I love that granola in the background..my girl gets so sick of seeing those bags..but the blue one is to die for..how much for the blue?

 

[VaPeD&CoNfUsEd]

Lol yeah that's some good shit.

370$ shipped.

If someone was to buy both rigs we'd give an amazing deal!

 

[Bravesst]

Is there any truth to the reduction of OD for AA and Solo stems in the future? My current Joda short stem (picked it up on Puffitup) is unable to fit into either my two Airs or Solo. It's a great look, fine piece of art, love to get to use it soon.

 

[VaPeD&CoNfUsEd]

It should fit great as each one is fit by hand before they go out. They are a tight fit at first until the Orings get a little stretched to them. Have you tried fitting it while the unit is hot?

 

[Bravesst]

It should fit great as each one is fit by hand before they go out. They are a tight fit at first until the Orings get a little stretched to them. Have you tried fitting it while the unit is hot?

Great Piece!
I'm not using O-rings in the Solo, and none obviously in the Air. Just real tight even red hot. I'll give it another go tomorrow. I'm sure it's just me. Awesome product!!!

 

[VaPeD&CoNfUsEd]

I mean the factory Orings. The ones that are built into it. I can't believe it doesn't fit in any of them. Even if they are super tight for the air it should be nice and smooth in the solo. As there is a bit of a difference in the diameter of the 2.

 

[Trogdor]

I mean the factory Orings. The ones that are built into it. I can't believe it doesn't fit in any of them. Even if they are super tight for the air it should be nice and smooth in the solo. As there is a bit of a difference in the diameter of the 2.

How old was the test fit solo? perhaps different models have differences in oven diameter. On my solo I couldn't even get it past the metal cap, had to sand it out a bit. I also replaced the little plastic ring with 3 PIU silicone o-rings since it was quite tight, now the stem works like a charm.

 

[VaPeD&CoNfUsEd]

The solo I use for test fitting is an old broken m105. But I also test each piece in my air. Although my air is probably a bit more stretched than most. I just didn't want them to be too loose. Then everyone would complain about that.

 

[Trogdor]

@VaPeD&CoNfUsEd I've got one from only a couple months ago, so maybe that's why. Not that it's much of a problem following those modifications, I never liked having a loose stem just clink around while I'm using it. BTW these PIU stems are great, gotta pick up a matching GonG next

 

[jojo0420]

This was requested on the EQ thread, thought I'd drop it in here as well.

Thing is a cloud machine!

 

[VaPeD&CoNfUsEd]

That is one sexy ass EQ right there!

 

[Nugg]

@VaPeD&CoNfUsEd have you got a factory solo stem? If so how tight/loose is it in the solo?

If you take the top off the solo so you can see the standard o ring thing. If you push down on that with the back of a spoon it tightens up the oven a bit and makes it hold on to normal stems really well.

I think your test fit solo might need a little tighten up?

 

[flotntoke]

This was requested on the EQ thread, thought I'd drop it in here as well.

Thing is a cloud machine!

Even after using one for years, that has got to be the best way to EQ I've ever seen! Nicely done!

 

[VaPeD&CoNfUsEd]

These are pieces you guys have seen but they are some real pro looking pics of them. My shopmate/apprentice 's wife is an aspiring photographer and has a real eye for photographing glass to show you a close representation of what we see in person. Please, if your on IG check out @ASHBASHFORCASH and my shopmate @DONDOOBIOUS to see her work and to see just how far he's come in just 4 months.

Available^^^

Sold^^^

Available^^^ and would do a matching drop down like the blue one.

 

[Bravesst]

I mean the factory Orings. The ones that are built into it. I can't believe it doesn't fit in any of them. Even if they are super tight for the air it should be nice and smooth in the solo. As there is a bit of a difference in the diameter of the 2.

There is an obvious ID diff with AA and Solo. Most of my Solo stems are quite loose (except one bent stem). My Solo is about a month old from Puffitup. I'm gonna warm the oven nice and hot (use another stem) and retry... no worries,

@VaPeD&CoNfUsEd
Somehow got it into my AA , best performance ever --- smooth as silk!!! Just real tight - hard time rotating to remove, just a bit of a concern on stretching seal. SO MUCH AIR, very nice!!!

 

[jojo0420]

@VaPeD&CoNfUsEd
Somehow got it into my AA , best performance ever --- smooth as silk!!! Just real tight - hard time rotating to remove, just a bit of a concern on stretching seal. SO MUCH AIR!!!

I've been using several of JoDa's stems in my air now, and they were pretty snug at first but now they fit a lot better and my stock stems still fits plenty tight. They won't fall out if I turn it upside down.

 

[mrgohamilton]

Can't wait for the blue inline and green mini tube to arrive in my mailbox!
And finally got my UV lightbulb so i'll post pics of the UV dropdown bucket set in a few!

 

[little maggie]

The new glass is beautiful. Still hoping for a haze stem.

 

[VaPeD&CoNfUsEd]

Sorry for the absence as of late guys. I've had some incredibly trying times in my personal life. I'm getting back into full swing now though.

On a side note:

Watch for some accessories for this lil guy very soon.

 

[Frederick McGuire]

Sorry for the absence as of late guys. I've had some incredibly trying times in my personal life. I'm getting back into full swing now though.

On a side note:

Watch for some accessories for this lil guy very soon.

Aww shit
Whatever you come up with for the GH, I think I wanna be in on that

I should probably wait until I actually get my GH (), but I wanted to officially declare my interest

 

[flotntoke]

Hope all is going OK @VaPeD&CoNfUsEd - or at least better than it has been.

Screw the GH and the years of associated nonsense!!! Let's get ready to start talking custom glass for this puppy. Am guessing there will probably be more in new owners hands sooner anyway. If you don't recognize it, you should check the thread. Zion!

Thanks in advance to @Shit Snacks for providing the nice pic!

 

[Mulehead]

Hope all is going OK @VaPeD&CoNfUsEd - or at least better than it has been.

Screw the GH and the years of associated nonsense!!! Let's get ready to start talking custom glass for this puppy. Am guessing there will probably be more in new owners hands sooner anyway. If you don't recognize it, you should check the thread. Zion!

Thanks in advance to @Shit Snacks for providing the nice pic!

You beat me to it @flotntoke! Was fixing to send Josh a PM, to start the design process. The Zion stems need to be US 18mm male, and not ISO. I believe all my other JoDa pieces are the US? Is that correct, is that your standard 18mm male @VaPeD&CoNfUsEd ?

 

[NickDlow]

You beat me to it @flotntoke! Was fixing to send Josh a PM, to start the design process. The Zion stems need to be US 18mm male, and not ISO. I believe all my other JoDa pieces are the US? Is that correct, is that your standard 18mm male @VaPeD&CoNfUsEd ?

Anyway u look at it millimeters are metric. 18mm in the U.S. is the same as 18mm anywhere else. Just sayin.

 

[VaPeD&CoNfUsEd]

14 and 18 are the same across the board.