jaxels art

GlassGrassOrVAS

Well-Known Member
Retailer
Do y'all notice a difference in consistency as far as performance between the vapbong and the berserker
Can only speak on OAB vs Classic vapbong at the moment as I already have experience with both, and find the variability in strength of draw and effects is greater with the classic than OAB. Aka more control to fine tune your experience and also increased ability to take the larger face melting clouds of vapor that the vapbong became famous for.

Not that you cant get a face melter with an OAB, but the constricted mouthpiece seems to make the draw more consistent and therefore less likely to give you a smack all at once. A hard pull from an OAB will give you a long consistent draw. Think trying to suck down a milkshake through a straw as fast as you can, not going to choke on it and only so much can enter at a time. The vapbong on the other hand has such a unique high airflow that the harder you pull the higher strength and output of vapor and without the increase in draw strength that we are used to with convection vaping. Now take the lid off that milkshake and try to drink as fast as you can by tipping cup back, you may find you cant drink at the same rate it is able to pour at. The vapbong is similar to this as even the most seasoned vape veterans have no issues getting this device to produce a strong enough draw to achieve the desired effect. This is the best real world example I can think of lol, hope it helps...

All that being said I currently have a berserker on the way and will report back when I have some experience with the device. I imagine it hits similarly to OAB as the mouthpieces are very similar on both devices and therefore I imagine draw & strength of pull would be similar. Hope this helps!
 

Jaxels (jaxelsart)

Active Member
Manufacturer
Hello dear ones here in the forum :-)

Peter has already publicly announced our cooperation and we are looking forward to it. For all our dear customers this will be a more pleasant transaction :-) By the way, we have great new stuff again ;-) feel free to check out our homepage. Our personal new favorite star is Mardi Gras.

We are still there for you if you have any questions. And in this sense we wish you a nice week. Jaxel

Do y'all notice a difference in consistency as far as performance between the vapbong and the berserker
All our models, OABs, Classics, Wonder Lamps as well as Berserkers are the same in function. The vapor feeling, however, is slightly different from model to model. The Minis, for example, are particularly well suited for people who pull rather gently.
I recommend you buy them all. :-)

 

GlassGrassOrVAS

Well-Known Member
Retailer
All our models, OABs, Classics, Wonder Lamps as well as Berserkers are the same in function. The vapor feeling, however, is slightly different from model to model. The Minis, for example, are particularly well suited for people who pull rather gently.
I recommend you buy them all. :-)


Totally agree as a customer myself, I am in the process of acquiring every model and have yet to find one I didnt enjoy and they all have differences in vapor feel!

Do y'all notice a difference in consistency as far as performance between the vapbong and the berserker
Received my Berserker a few days ago... Wow! This model is a nice mix between the Classic Vapbong & OAB models. You have the more restricted draw of the OAB which is similar to a rig and yet the ability to clear a huge hit with no draw like the Classic while using the carb hole. I also enjoy feathering the carb to cool the vapor and allow me to take longer and stronger draws. It has the option for multiple pucks/bowls so if your clumsy like me this is a definite plus, as you wont be stuck with a pretty vase if one breaks you still have another one. The Berserker does not seem to preserve herb as well as the Classic or OAB models, but might be because it is easier to take larger hits with the carb action available. More research necessary... 😉 Definitely another masterpiece from Jaxels Art!
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Looking good @GlassGrassOrVAS :tup:
Screenshot-20221201-183840.png
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Your luck, the first batch of OAB minis actually arrived in just yesterday along with some beautiful Berserker & Classic art editions & all I can say is wow! 😍

Oh you're reply got trapped in the other quote haha Anyway let's see some photos of those beauties! You can use imgur to up load them and then share them here
 

GlassGrassOrVAS

Well-Known Member
Retailer
Oh you're reply got trapped in the other quote haha Anyway let's see some photos of those beauties! You can use imgur to up load them and then share them here

Thank you for your help as always, not familiar with imgur so this may take some time, but I will attempt to figure it out...


Sorry didnt realize it would be so easy... someone please merge my posts, I apologize!
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Saw this video on Jaxels YouTube page... they are changing the electronics/heating element. It is now going to be a cartridge heater that should be less fragile and also user replaceable! Cool stuff.


That is awesome! I had been thinking it could make more sense to have a cartridge heater in there... Hopefully the old units could even be upgraded? More to buy lol
 

Arawfish

Green Thumb
Saw this video on Jaxels YouTube page... they are changing the electronics/heating element. It is now going to be a cartridge heater that should be less fragile and also user replaceable! Cool stuff.

Okay this is stellar! I love how they addressed almost all user concerns in the video and I really like what they’re doing with these vapes the past few months, and how passionate these two are! Love to see it and that cartridge heater is probably the best thing the could be doing. It’s a little expensive to get a new one into Canada at the moment (like $1100 dollar’s expensive) but I will for sure be getting a bubble bandit at some point!
 

Jaxels (jaxelsart)

Active Member
Manufacturer
Hello dear all :cool:

much time has passed again. But you know where to find us if you have questions - and we do not answer here.

We are pleased that the cartridge is so well received. That was very close to our hearts. And yes, every device is convertible. That was another important point for us.

Much has happened with us, much we were allowed to learn. Well, we had to. But you grow with it. And also, the first Weedlee was born. Jack Weedlee. The process of creation can be seen on our YouTube channel. With this, the High Edition is also born.

We are also happy to receive your wishes. Orders can be placed at any time, also via Telegram.
https://t.me/DeBastelbude
And I would also like to mention Peter. He helps our dear customers in the USA and Canada gladly and has many mega beautiful devices that are immediately available. You can also follow him on Instagram. https://www.instagram.com/glass.grass.vas/

We wish you all a fantastic rest of Sunday.

Love

Janine

:love:
 

GlassGrassOrVAS

Well-Known Member
Retailer
yoooo my OAB doesn't have a carb:(
This was the original OAB design, notice the heater is off to the side as well. Collyland changed it to have everything lined up as some prefer it this way & took away the carb hole. That being said the artists have brought back the carb & side heater, just look for their "Old School" version of the OAB. No worries if you have a preference the artists are currently producing both the "Classic" & "Old School" OAB models & we have them both in stock along with some rare Minis!
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I love having no carb on my newer aromatizers, also I do like the original form factor with the heater on the left side, but keep in mind that it is more ambidextrous when the heater is straight across :tup:
 

Jaxels (jaxelsart)

Active Member
Manufacturer
Love dear all,
Media are the most powerful tool to positively highlight situations, people and much more. But the media can also have exactly the opposite effect. This is currently the case here. Currently, untrue statements of fact, character assassination, slander and defamation are spread about us.

In order not to stand in the way of legal action, we will not comment on current events. We will also not comment on the calls for violence and other threats against us, which are the result of a single person. We ask for your understanding.

Love, Jaxel
 
Top Bottom