Yeah. You guys win.
Interplanetary Development
- Thread starter InterplanetaryTanner
- Start date
Thanks!
It should be available soon. Currently we are waiting on the magnets. My guess is that it will be ready in about 2-3 weeks!
It should be available soon. Currently we are waiting on the magnets. My guess is that it will be ready in about 2-3 weeks!
duff
Well worn
Very cool @InterplanetaryTanner.
I can think of about 20 places where I'd like to put one.
Is there a price yet?
I can think of about 20 places where I'd like to put one.
Is there a price yet?
You could always buy 20! 
Price will likely be $12.50
Price will likely be $12.50
HD Springer
Well-Known Member
So is it a vapcap stand. With a grinder inside or just a stand
It's just a stand.
snackmaster
Well-Known Member
Gigsabits53
Well-Known Member
I will be buying a few of those. These will be nice for convenience, and I love convenience.
It'd be a nice ID fridge magnet too
Can Confirm!
I suppose it will also make a great paperweight, or coaster, or grinder coaster… I don't remember who, but I know someone was looking for a grinder coaster?
I will be buying a few of those. These will be nice for convenience, and I love convenience.
duff
Well worn
Is it aluminum @InterplanetaryTanner?
It is aluminum! It weighs roughly 4.3 ounces I believe. - Not sure on the magnet grade. I think the prototype versions I have have a N35. But we opted for a stronger one. I'm not sure what grade it is, but I should find that out tonight.
Well everyone! You got the pre-pre release sneak peak!
I've just got word that the final steps in production before packaging are all coming together. And that the products should be shipping to us very soon. So what better of a time than now to start preorders??
https://www.interplanetarydevelopment.com/products/the-launch-pad
I've just got word that the final steps in production before packaging are all coming together. And that the products should be shipping to us very soon. So what better of a time than now to start preorders??
https://www.interplanetarydevelopment.com/products/the-launch-pad
duff
Well worn
Ordered!
Thanks @InterplanetaryTanner!
Thanks @InterplanetaryTanner!
snackmaster
Well-Known Member
Well, It's called The Silo and it's coming soon!
Really though, we've encountered a short delay, unfortunately. - The Chinese Government seems to be in the process of drasticly increasing their environmental protection policies. And as a result, they enforced some sort of mass factory shutdown while they rolled the new policies out, worked on enforcement, paperwork, and all sorts of those fun things.
The good news is that I'm told they can start working again Monday.
The bad news is that the ban initially was for anodization, then morphed into a full shutdown. So the factory we use is quite overrun with products that need to be anodized and packaged.
Anyways, as far as this goes affecting ID, I'm told that the Launch Pads are already ready on the trays to be anodized. So I'm hoping the Launch Pad will be finished and packaged, ready to ship around the end of next week. But well see.
The Silo on the other hand, should already have the first prototype machined. Which means it shouldn't have a problem cutting the line to anodization so they can included it with the shipment of the Launch Pads. - We made a few changes to it during the mass shutdown, so the real question if we will get the Version 2 Prototype or not. Which will likely depend on their approach to the massive amount of things they need to anodize and package.
So there's two solid non-answers for you!
But really, it shouldn't be long. And I think everyone here will like it. And it should work with all 92mm non-Vong Vapcaps. But we'll see. - Also, I'm super happy I went with a forgiving 'September' date for the Launch Pad availability opposed to an 'End of August' one. Because there's no way we would have made that.
Really though, we've encountered a short delay, unfortunately. - The Chinese Government seems to be in the process of drasticly increasing their environmental protection policies. And as a result, they enforced some sort of mass factory shutdown while they rolled the new policies out, worked on enforcement, paperwork, and all sorts of those fun things.
The good news is that I'm told they can start working again Monday.
The bad news is that the ban initially was for anodization, then morphed into a full shutdown. So the factory we use is quite overrun with products that need to be anodized and packaged.
Anyways, as far as this goes affecting ID, I'm told that the Launch Pads are already ready on the trays to be anodized. So I'm hoping the Launch Pad will be finished and packaged, ready to ship around the end of next week. But well see.
The Silo on the other hand, should already have the first prototype machined. Which means it shouldn't have a problem cutting the line to anodization so they can included it with the shipment of the Launch Pads. - We made a few changes to it during the mass shutdown, so the real question if we will get the Version 2 Prototype or not. Which will likely depend on their approach to the massive amount of things they need to anodize and package.
So there's two solid non-answers for you!
But really, it shouldn't be long. And I think everyone here will like it. And it should work with all 92mm non-Vong Vapcaps. But we'll see. - Also, I'm super happy I went with a forgiving 'September' date for the Launch Pad availability opposed to an 'End of August' one. Because there's no way we would have made that.
RJHQ
Dreamer
What's the inner cylinder / puck diameter, if I may ask?
Last edited:
.5 Inches I believe.
Hey Everyone - If you're looking to get any ID Gear, or are looking to get some of the VapCap stands, now's probably a good time to do so. Since our Labor Day sale ends tonight.
Also, the VapCap stands/ The Launch Pad is currently being packaged up. And it should be shipping to us either tonight or tomorrow. So we should have it for shipping out in a week, plus or minus some days!
Also, the VapCap stands/ The Launch Pad is currently being packaged up. And it should be shipping to us either tonight or tomorrow. So we should have it for shipping out in a week, plus or minus some days!
They have! I should be getting the tracking number sometime tonight.have these puppies shipped yet?
pxl_jockey
Just a dude
@InterplanetaryTanner quick question- I think I remember some really cool pick-type tool on your site. I tried to find the other day and had no luck. Did you ever have such a product or am I just high? TIA
Hmm. That's a great question.
The SWI has a standard guitar pick. And the SWII has a metal pick that contours to the edge.
Then, there also was a mock up of a multi tool type thing we posted on instagram that was never put into production.
Does one of those sound familiar?
The SWI has a standard guitar pick. And the SWII has a metal pick that contours to the edge.
Then, there also was a mock up of a multi tool type thing we posted on instagram that was never put into production.
Does one of those sound familiar?
pxl_jockey
Just a dude
Sorry mate, I wasn't very clear. It wasn't a guitar pick, but a SS double_ended tool. I thought it was in accessories. No worries, could've sworn it was ID but obviously I dreamt the whole thing! You are a rock star getting back to me so fast, and FC rocks for giving us a place to do this! Thank you sir.
I don't know. Is 6 hours fast? We definitely don't have a stainless steel double ended tool though. But I do think I know what you are talking about, maybe. Or at least, I've seen similar type of tools as what I imagine it is that you've dreamt up. lol
Here's the stainless steel pick that comes with the SWII and the prototype we never made that I mentioned above.
https://www.instagram.com/p/BJqhXpEAew1/
Here's the stainless steel pick that comes with the SWII and the prototype we never made that I mentioned above.
https://www.instagram.com/p/BJqhXpEAew1/
The Beagle
Bubbles & Bags
You should make one then as I can't find the one I want: a small but deep scoop on one end to load weed and a pointy tool on the other side to do various vape related stuff. Not needle point sharp, just pointy.