Herborizer corner

[Pomples420]

Go get 'em, marcuss!

Stickstones!!! Man, I gotta tell you… You and Troy, you are magic together! There is something about your conversations/podcasts, they have me coming back time after time!! Honestly man, you guys have brought me so… much… laughter I only watched the one where you are at Troy’s, and you ate the packing nut last night!!! LmFao Then I have literally just found The Search for the Planet of the Vapes…. Oh my goodness!! When you have chronic pain, you’ll know… there’s not always a lot of comic relief, and you guys bring me that!! So thank you, truly!! I have also found your platforms invaluable, I trust your opinions, which is why I am here. I have heard you mention this forum a number of times!
Can I ask you though, I want to buy my first ball vape… but I would like to micro dose with it. I have seen you talk about the herborizer, and I think that this could be the right one. I have also been looking at the Vb1.5, the thermal twist, or the BZero… for someone who is looking for a deep body sedation, but without too powerful, as I am relatively new to this… But I NEVER cough. Like NEVER, LOL!!! I have a mighty and the volcano. But I have the chamber reducer in the Volcano. I can take a full lung full of a temp step balloon and I still don’t cough. Lol would you have any advice, please?

 

[Grass Yes]

Can I ask you though, I want to buy my first ball vape…

This is pretty off topic for this thread. Rather than replying to a message from 15 years ago, have a look at the Ask FC section. There is a great ball vape thread where this is discussed:

**Ball vape comparison megathread** Compare your balls.

Titanium bowls are more likely to stick when they heat up too I just got the Tiodw Plus Ti bowl, which allows for lower temps and faster extraction but it expands and gets stuck every time so you have wait for it to cool down and shrink again before you can empty the bowl

fuckcombustion.com

Ignore the poll as it is pretty outdated.

Since you are new to the site also have a look at the rules. Have fun and welcome to FC!

 

[4-Aces King-High]

This is pretty off topic for this thread. Rather than replying to a message from 15 years ago, have a look at the Ask FC section. There is a great ball vape thread where this is discussed:

**Ball vape comparison megathread** Compare your balls.

Titanium bowls are more likely to stick when they heat up too I just got the Tiodw Plus Ti bowl, which allows for lower temps and faster extraction but it expands and gets stuck every time so you have wait for it to cool down and shrink again before you can empty the bowl

fuckcombustion.com

Ignore the poll as it is pretty outdated.

Since you are new to the site also have a look at the rules. Have fun and welcome t

I finally got to Order an XL Heater, should be on the way soon from Herborizer. I wanted the original style heater .

The Herborizer is in the USA And May arrive in next couple of days after going through customs, the Ti version May be next as I told myself the OG Herborizer would be the last in my collection . Next! lol

 

[4-Aces King-High]

The Herborizer is in the USA And May arrive in next couple of days after going through customs, the Ti version May be next as I told myself the OG Herborizer would be the last in my collection . Next! lol

The Herborizer came today only to realize this Heater is Huge and NEED the Herborizer Injector bowl . I ordered the bowl and A spare- maybe I will not break the first. I perceived the size to be 18/19mm Injector Heater . Cheers and soon to be cheers with Herborizer bowl 8 days to get to my address.

 

[4-Aces King-High]

The Herborizer came today only to realize this Heater is Huge and NEED the Herborizer Injector bowl . I ordered the bowl and A spare- maybe I will not break the first. I perceived the size to be 18/19mm Injector Heater . Cheers and soon to be cheers with Herborizer bowl 8 days to get to my address.

I measured 21.15mm to 23.55mm on the Herborizer Heater taper .

 

[mistergyro]

USA Team Herborizer -

I'm in need of some serious help. I'm a huge fan of Herborizers straight tubes with no perc. In fact I think it's the no perc design that really differentiates itself from anything else out there. Problem is...

I recently broke mine and tried to order a replacement but Sebastian told me the shipping price to USA will now be double from 60 euro to 120 euros! I really love this body style but it's got me thinking....maybe someone on FC knows a good alternative? Something that doesn't cost an arm and a leg to ship? Or maybe someone in the US can make such a simple design for cheaper?

I've searched DHgate and the sort and couldn't find anything like it. Seems like everything now has to have fancy percs but that's where I turn to my expert FC friends...Any help?

examples below

Straight Tube no perc #1

Straight Tube no perc #2

 

[Hippie]

I've heard them called natural or single hole perc

 

[mistergyro]

oh nice, i've never heard that before. maybe that might turn up better search results. thanks Hippie!

 

[The Big Lebowski]

I‘m still loving my Herbo, it‘s my most used vape.
Now, after a year of heavy usage, I‘m using a little problem:
The o-rings don‘t hold the glass part of the Herborizer anymore, so it get‘s stuck in the bowl when pulling out.
Do anyone have a mod/idea beside getting some new o-When you heat it, stop sliding, heat the head upside down

When you heat it, stop sliding, heat the head upside down

 

[dimmusp]

Hi, what's the best 18 mm all-glass bowl (including the screen) for the Herborizer Ti?

So far I've found these:
- "18.8mm FlowerPot "Standard" Glass Bowl"
- "18mm Injector Style "Elev8" Glass Bowl for FlowerPot"

Thanks

 

[Radwin Bodnic]

Hi, what's the best 18 mm all-glass bowl (including the screen) for the Herborizer Ti?

So far I've found these:
- "18.8mm FlowerPot "Standard" Glass Bowl"
- "18mm Injector Style "Elev8" Glass Bowl for FlowerPot"

Thanks

None of these will work with the Ti.

The first one is a 22mm diffuser bowl. The second one has the screen too close to the taper and it will hit the Ti diffuser and prevent a proper seal in addition to burn your herb.

Some of those will work : you need to choose the XL variations. Those with a glass screen are INJ7 and INJ8.

You can probably find these on Chinese website as well.

Edit : the Arizer connoisseur bowl on a 18mm male adapter will work as well.

 

[Texus]

One thing I am very psyched about is that @Custom Flower Hardware has a video of Herborizer with his super cool Electropath. And looks like the depth and size of Herborizer should work great. Finally pulled the trigger and that video from the Electropath thread convinced me since I can't swing the Kettle and it both right now.

 

[dimmusp]

One thing I am very psyched about is that @Custom Flower Hardware has a video of Herborizer with his super cool Electropath. And looks like the depth and size of Herborizer should work great. Finally pulled the trigger and that video from the Electropath thread convinced me since I can't swing the Kettle and it both right now.

@Custom Flower Hardware What bowl is that?

Thanks guys

 

[Texus]

@Custom Flower Hardware What bowl is that?

Thanks guys

See this link. A very unique option inspired by the legendary Sublimator.

I think Herborizer video is on 2nd or 3rd page IIRC.

The Electropath

https://streamable.com/saz0gt Also works with the B1 injector head as well as the Elev8r.:tup:

fuckcombustion.com

 

[dimmusp]

One thing I am very psyched about is that @Custom Flower Hardware has a video of Herborizer with his super cool Electropath. And looks like the depth and size of Herborizer should work great. Finally pulled the trigger and that video from the Electropath thread convinced me since I can't swing the Kettle and it both right now.

I think I found it, but he uses a metal bowl. I was asking about 18, mm glass bowls with glass screens for the Herborizer.

The Electropath

https://streamable.com/saz0gt Also works with the B1 injector head as well as the Elev8r.:tup:

fuckcombustion.com

Thanks, though! Pretty cool setup.

 

[Hippie]

Any "deep" "tall" or "xl" bowl will do the job
Vgoodiez call it XL https://vgoodiez.com/products/boros...amber-by-vgoodiez?_pos=3&_sid=c53cca1fc&_ss=r
RVS call theirs tall https://recommendedvapesupplies.co.uk/products/adapter-injector-bowls?variant=43340222300396
There are loads of others out there
The glass screens clog up quick tho so I prefer a mesh screen, myself

 

[dimmusp]

Thanks for all the suggestions!

So far we have:
- Arizer Connoisseur Bowl (+ male-to-male adapter): https://www.dutch-headshop.nl/arizer-glass-connoisseur-bowl
- RVS Adapter/Injector Bowls - Tall/Short - 14mm/18mm: https://recommendedvapesupplies.co.uk/products/adapter-injector-bowls?variant=43340222300396
- VGoodiEZ Borosilicate V2 (19mm Input) Injector Chamber: https://vgoodiez.com/products/borosilicate-v2-injector-chamber-by-vgoodiez

Which one is the best?
Are there any significant differences between their glass screens or the distance from the Herborizer Ti to the herb?

 

[Hippie]

I think it probably comes down to
which handle you prefer
whether you want notches to hold a mesh screen or not
if you want a carb built into the bowl or not

 

[Texus]

I recommend a bowl with notches to hold in the screen or a design where the screen is otherwise held into place well. And yes distance from flower matters. Herborizer has that pretty perfected in their own bowls. Vgoodies XL is pretty close to that

 

[sweetherb]

Why not just use the standard Herbo Ti bowl? I bought a couple of these and they work perfectly. I can't see how any other bowl would perform better.

 

[Radwin Bodnic]

Why not just use the standard Herbo Ti bowl? I bought a couple of these and they work perfectly. I can't see how any other bowl would perform better.

@dimmusp was asking for a glass screen bowl

 

[dimmusp]

I ended up buying the pass through chamber from VGoodiEZ. One with a glass screen and one with a steel screen. I bought the latter in case the glass screen doesn't work well (VGoodiEZ) themselves don't recommend it.

What I like about them is that the carb allows you to clear the piece without detaching the Herborizer. It sometimes gets stuck to the default bowl, and was the source of a couple accident close calls for us (we're clumsy!).

 

[Hippie]

You might want to pick up a silicone carb cap tether or something like these for the carb stopper as well

Silicone Lanyard - Carb Cap Tether

These are the replacement Silicone Carb Cap tethers for the Core e-rig. We have found they are very useful for various setups as they are also compatible with the Crossing Bottomless Bangers and Carb Caps as well as the Poseidon V2 for Sai TAF and New Sequoia when used with a glass Carb Cap...

recommendedvapesupplies.co.uk

To stop you dropping the stopper every time you empty the bowl - as it's quite annoying when that happens lol

 

[dimmusp]

You might want to pick up a silicone carb cap tether or something like these for the carb stopper as well

Silicone Lanyard - Carb Cap Tether

These are the replacement Silicone Carb Cap tethers for the Core e-rig. We have found they are very useful for various setups as they are also compatible with the Crossing Bottomless Bangers and Carb Caps as well as the Poseidon V2 for Sai TAF and New Sequoia when used with a glass Carb Cap...

recommendedvapesupplies.co.uk

To stop you dropping the stopper every time you empty the bowl - as it's quite annoying when that happens lol

Thanks, but shipping from the UK to the Netherlands is £16.00! For a piece of silicone that costs £3.36...

 

[roonsy]

sup everyone

does anyone know where I can buy any alternatives to the "suction tube 14.5" sold by herborizer? I've broken my second one and I can't afford the shipping from herborizer anymore... just really wanna use my herborizer.

am in Australia.