Discontinued Haze Dual V3

[KidFated.]

Anyone use shatter in the v3 with a water attachment? I was thinking about this the other night. The vape has to be upside down which wouldn't that cause the concentrate to leak into the actual vape possibly causing issues? Cause when you use shatter you should always hold the cape flat wth the ovens facing up.

If you use hemp fiber or cotton to hold the shatter, you can invert the unit to take a rip, and then put the unit "right side up" until you take the next rip.

 

[ginolicious]

If you use hemp fiber or cotton to hold the shatter, you can invert the unit to take a rip, and then put the unit "right side up" until you take the next rip.

Ah fair enough. I hear a lot of people doing that without water attachments. I never use anything in my shatter cans. I just drop it in and go to town. But if I get into water I may need to make the investment lol.

 

[Skyscraper]

So I've noticed when I flip the switch on my Haze the light will blink red very quick and then start heating. I never noticed it until today and wonder what it could mean?

 

[virtualpurple]

Ah fair enough. I hear a lot of people doing that without water attachments. I never use anything in my shatter cans. I just drop it in and go to town. But if I get into water I may need to make the investment lol.

I usually keep it laying sideways and use a whip from my Herbalizer so I can avoid spilling.

I have also used hemp fiber as @kidfated has described, which works awesome!

 

[ginolicious]

So I've noticed when I flip the switch on my Haze the light will blink red very quick and then start heating. I never noticed it until today and wonder what it could mean?

I get that from time to time. When I see that I pop in a fresh battery. Don't like being half a bowl in and have the battery die on me.

 

[Formersmoker85]

Hey guys

Here's an update of my warranty issue with the Haze.
Haze contacted me shortly after i posted here in July.
Somewhere in august i received my new unit and i must say i really happy with it.
I'm not that active on the forum (i follow some of the popular threads but most of the time i'm just living the life) but i felt the need to let you guys now everything went fine.
Haze CS held on to there word by giving me a new unit minus the cost i needed to pay to customs.
Now i hope this unit will have a good durability and wont die on me soon.


Cheers

 

[ichibaneye]

Hey guys

Here's an update of my warranty issue with the Haze.
Haze contacted me shortly after i posted here in July.
Somewhere in august i received my new unit and i must say i really happy with it.
I'm not that active on the forum (i follow some of the popular threads but most of the time i'm just living the life) but i felt the need to let you guys now everything went fine.
Haze CS held on to there word by giving me a new unit minus the cost i needed to pay to customs.
Now i hope this unit will have a good durability and wont die on me soon.


Cheers

I used to deal with a few people at Haze technologies pretty closely as in phone conversations and personal emails. I even received Christmas cards from them. That being said I'm still waiting for my pm to be answered so I can send my units in for servicing. I hope my mailbox here is not messed up or something. Maybe my personal dumb you down pocket tracking device is on the glitch...i don't know though.

Who did you deal with? I really would like to get my two little gems back up to speed here soon. It's about time for ski season and the Haze is my perfect companion while out backcountry skiing.

For reference I had zero problems with my V3's for almost two years before needing them looked at.

I have always been up on the cleaning regiments. I just use the hell out of mine.... like all of the damn time. Thanks!

 

[Haze Vaporizers]

I used to deal with a few people at Haze technologies pretty closely as in phone conversations and personal emails. I even received Christmas cards from them. That being said I'm still waiting for my pm to be answered so I can send my units in for servicing. I hope my mailbox here is not messed up or something. Maybe my personal dumb you down pocket tracking device is on the glitch...i don't know though.

Who did you deal with? I really would like to get my two little gems back up to speed here soon. It's about time for ski season and the Haze is my perfect companion while out backcountry skiing.

For reference I had zero problems with my V3's for almost two years before needing them looked at.

I have always been up on the cleaning regiments. I just use the hell out of mine.... like all of the damn time. Thanks!

We do not have a PM from you. Your last PM was responded to within 2 days and we never heard back from you. Based on your constant criticism on Haze Service on both threads, we felt like you simply did not like our response and we thought that it was the reason you did not respond back. If that is not the case, please read our last PM to you and let us know when you are ready for the service. We will gladly service you as fast as we can.

 

[ichibaneye]

We do not have a PM from you. Your last PM was responded to within 2 days and we never heard back from you. Based on your constant criticism on Haze Service on both threads, we felt like you simply did not like our response and we thought that it was the reason you did not respond back. If that is not the case, please read our last PM to you and let us know when you are ready for the service. We will gladly service you as fast as we can.

If you've read what I've written prior I had not seen a reply to my last or the one that you're speaking of. Thus my confusion. My phones been a bit buggy for awhile now as I've mentioned. Damned if I do damned if I don't I guess....anyways.

I'm ready right now but I'd rather not send both in at the same time if it's possible as my Haze goes out with me wherever I go. It has been my trusty best friend from day one. and I'd feel a bit lost without one in my pocket.

I guess I'll start another pm and get this ball rolling. @Haze Vaporizers I appreciate the response. Thank you.

My other comments are based on what I've observed so that's not on me. Using the word "constant" is anything but true and a bit of overkill. I've had my balls busted here in the forums a few times & some of it was unwarranted even. Oh well, a grain of salt as they say. I've adjusted and moved forward for the better.

I wish nothing but the best for HazeTechnologies. I plan to own all of your products as they're released and to this day I continue to send friends and others your way. I've got 3 buddies that now own your Haze. I still love you guys however sometimes love can be tough at times. Cheers!

 

[C No Ego]

I have a new wooden WPA ordered from @Ed's TnT ... my other wooden wpa broke that thing makes this vape no doubt...

Edit
WPA arrived!! back into full action with this vape and the wooden WPA!! Thanks again @Ed's TnT for such a beautiful work of art that seats perfectly on the V3... with me being carfeul I can make this wpa last as long as the V3! Peace

 

[Drexciya]

If you've read what I've written prior I had not seen a reply to my last or the one that you're speaking of. Thus my confusion. My phones been a bit buggy for awhile now as I've mentioned. Damned if I do damned if I don't I guess....anyways.

I'm ready right now but I'd rather not send both in at the same time if it's possible as my Haze goes out with me wherever I go. It has been my trusty best friend from day one. and I'd feel a bit lost without one in my pocket.

I guess I'll start another pm and get this ball rolling. @Haze Vaporizers I appreciate the response. Thank you.

My other comments are based on what I've observed so that's not on me. Using the word "constant" is anything but true and a bit of overkill. I've had my balls busted here in the forums a few times & some of it was unwarranted even. Oh well, a grain of salt as they say. I've adjusted and moved forward for the better.

I wish nothing but the best for HazeTechnologies. I plan to own all of your products as they're released and to this day I continue to send friends and others your way. I've got 3 buddies that now own your Haze. I still love you guys however sometimes love can be tough at times. Cheers!

We almost have the same exact Haze stats. I also have two and three of my friends that got one because of me.

 

[ichibaneye]

I have a new wooden WPA ordered from @Ed's TnT ... my other wooden wpa broke that thing makes this vape no doubt...

Edit
WPA arrived!! back into full action with this vape and the wooden WPA!! Thanks again @Ed's TnT for such a beautiful work of art that seats perfectly on the V3... with me being carfeul I can make this wpa last as long as the V3! Peace

Agreed, it's a whole new beautiful thing once the Haze is paired with a water device. Simply amazing actually.

We almost have the same exact Haze stats. I also have two and three of my friends that got one because of me.

Right on! I'm always bragging up and down about my stealth black little friend. Thanks for sharing that.

 

[Drexciya]

You have two blacks? I've got a black and a green one. I bought one because I wanted to quit smoking. After 2 days I bought another one because I just couldn't stand the thought of it failing on me and not having a back up at hand.

One was about to fail but it got resolved by Haze CS to my full satisfaction. After I got it back I lend it to my dad and after almost a year he returned it. Both chambers were still filled. He never used it, so now I have one that's still quite new and one that's pretty battered but it still keeps on rocking.


Nowadays I have a Home Grown Log Vape at home and I bought some Vapcaps, but the Haze is my go to device for when I go outdoors for music or fishing or amusement parks.

 

[ichibaneye]

You have two blacks? I've got a black and a green one. I bought one because I wanted to quit smoking. After 2 days I bought another one because I just couldn't stand the thought of it failing on me and not having a back up at hand.

One was about to fail but it got resolved by Haze CS to my full satisfaction. After I got it back I lend it to my dad and after almost a year he returned it. Both chambers were still filled. He never used it, so now I have one that's still quite new and one that's pretty battered but it still keeps on rocking.


Nowadays I have a Home Grown Log Vape at home and I bought some Vapcaps, but the Haze is my go to device for when I go outdoors for music or fishing or amusement parks.

Yes, two! It's perfect because while cleaning one I'll be puffin on the other. I actually use mine at home at times and not just while I'm out and about.

Using the Haze in itself is a unique experience and sometimes while at home I'm compelled to enjoy it there too. Like while cleaning, cooking food and such. It truly is the portable of portables in my book.

 

[stinkytofus]

Any signs of a haze v4?

 

[C No Ego]

Any signs of a haze v4?

No, but Haze square is right around the corner.... and Haze Merger too

http://fuckcombustion.com/threads/haze-square.20593/page-24

 

[ginolicious]

I'm going strong on my V3 for almost a year. Love the purple look. But the batteries I feel are a bit wonky. Mine deplete on their own when not in use. But that's a battery lemon probably has nothing to do with the vape. Maybe it's time for a few new batteries and some extra cans.

 

[Sketch420]

My batteries will do the same If they are inside the unit. But a year of heavy vaping i can see most 18650s getting a little weaker. A new battery will usually blow your mind on how bad the old ones are since they degrade so slowly you don't notice til it's bad.

On another note i used the haze for the first time in a while and it worked flawlessly. I had so missed using this vape when out and about. I will def getting this back into rotation. It's much easier to use than a butane vape when walking down by the river. Can't wait to have another excuse to use it again.

 

[C No Ego]

My batteries will do the same If they are inside the unit. But a year of heavy vaping i can see most 18650s getting a little weaker. A new battery will usually blow your mind on how bad the old ones are since they degrade so slowly you don't notice til it's bad.

On another note i used the haze for the first time in a while and it worked flawlessly. I had so missed using this vape when out and about. I will def getting this back into rotation. It's much easier to use than a butane vape when walking down by the river. Can't wait to have another excuse to use it again.

V3 is certainly a work horse... I have stuck with the little cans for use lately but every now and then use the screen too... my batts could be effected by now but I do not notice really, I keep all 4 charged so if one go dead there another to grab... when all 4 go bad I will have a problem LOL

 

[TheMutzNutz]

Hi

This is my first post, ive been reading quite a bit in here over the last few weeks and the amazing amount of info helped me make the decision to get into vaping.
My haze v3 arrived last friday so today is my one week anniversary of fucking combustion! Im very happy with my haze so far but I have a few questions and wondered if anyone could help me.

The other day I fired my haze up and was waiting for a while for it to get tontemp setting 2, eventually the unit just shut off and wouldbt come back on. Put a new battery in when i got home and all was good but i thought there was some sort of battery low warning?

Ive been looking for a case for my vape and will invest in the haze case atvsome point forvwhen im out and about but im currently looking for a case to keep all my gear in (haze plus accessories, grinder etc) anyone have any recommendations? I would also like it to be big enough for me to prep my vaping session in.

I have a few general vaping questions also..

I read somewhere that air must be moving for the likes of thc to pass into the blood stream. If thats the case would it not make more sense to take many smaller draws rather than ten second slow ones?

So far when vaping ive been starting off on setting 2 and working my way up tob4 when I haze my last few blasts. Would it make any difference if I had a quick blast straight at setting 4? Would this be less efficient?

Thanks in advance!

 

[C No Ego]

Hi

This is my first post, ive been reading quite a bit in here over the last few weeks and the amazing amount of info helped me make the decision to get into vaping.
My haze v3 arrived last friday so today is my one week anniversary of fucking combustion! Im very happy with my haze so far but I have a few questions and wondered if anyone could help me.

The other day I fired my haze up and was waiting for a while for it to get tontemp setting 2, eventually the unit just shut off and wouldbt come back on. Put a new battery in when i got home and all was good but i thought there was some sort of battery low warning?

Ive been looking for a case for my vape and will invest in the haze case atvsome point forvwhen im out and about but im currently looking for a case to keep all my gear in (haze plus accessories, grinder etc) anyone have any recommendations? I would also like it to be big enough for me to prep my vaping session in.

I have a few general vaping questions also..

I read somewhere that air must be moving for the likes of thc to pass into the blood stream. If thats the case would it not make more sense to take many smaller draws rather than ten second slow ones?

So far when vaping ive been starting off on setting 2 and working my way up tob4 when I haze my last few blasts. Would it make any difference if I had a quick blast straight at setting 4? Would this be less efficient?

Thanks in advance!

Great choice! the V3 is a work horse... I personally like the little dry herb cans for convenience and keeping the bowls on the v3 clean... the screens work well too, they just add extra stickiness over time in the bowls that needs cleaning , no big deal just something to consider..
the orange light that blinks when the unit is on will blink red if the batt is to low on juice... the orange light too will look dim when you first turn on the unit if the batt is weak and about to die..
I recommend to get a few extra v3 batts- I have 4 batts total and never run out of juice as long as I remember to keep them charged up...
with the v3 case you can carry the vape on one side with the strap and the side with the mesh use it for a small or medium size flat 2 piece grinder etc... the case most likely would hold all your stuff and even has a slot for the haze mouthpieces...
in terms of effective vapor usage... IMO, slow compound absorption works best to benefit from all of the different cannabis molecules that are heat sensitive and release @ certain heat points...
what I've found works best on all my vaporizers is to start the session at around 375 and heat step @ 10 degree F increments until the heat level is maxed out on the unit.... or in the case of the v3 start at level one and go up from there... inhale that vapor at that first heat level until the terpene flavor wears off and then bump up to the next heat level until you notice the vapor taper off some... this is how I gauge vapor on any given vape Session < (the good session lol)... you will start to notice the right time to bump it up as you vape more.. this heat stepping IMO introduces the active therapeutic components in the cannabis in a clean efficient way to your ready to receive cannabinoid receptors... starting out at the highest temp on the v3 would give you a few lung busting hits but most of the heat activated molecules will be wasted on the exhale into the air around you...
another great way to get the most out of your Session HE HE is re-breathing a hit... when you inhale vapor hold it in really deeply a few seconds then start to exhale. when you visibly see vapor on the exhale rebreath it back in and hold a few secs... do this a few times per hit and you effectively increase bio-active absorption... the science= your capacity to absorb compound molecules in your airways is dictated by oxygen... once you take a massive hit you can only absorb actives for a few seconds before your absorption capacity diminishes and new oxygen becomes necessary to reopen absorption... this too is exactly why slower absorption is more efficient... doing this method with smoke is not that possible as its totally nasty to rebreath smoke but with vaporizers it's totally doable= I do it all the time
Below is a heat release chart of the cannabinoids in cannabis to explain it even better= Enjoy!
Phytocannabinoids, their boiling points, and properties


?-9-tetrahydrocannabinol (THC)
Boiling point: 157*C / 314.6 degree Fahrenheit
Properties: Euphoriant, Analgesic, Antiinflammatory, Antioxidant, Antiemetic

cannabidiol (CBD)
Boiling point: 160-180*C / 320-356 degree Fahrenheit
Properties: Anxiolytic, Analgesic, Antipsychotic, Antiinflammatory, Antioxidant, Antispasmodic

Cannabinol (CBN)
Boiling point: 185*C / 365 degree Fahrenheit
Properties: Oxidation, breakdown, product, Sedative, Antibiotic

cannabichromene (CBC)
Boiling point: 220*C / 428 degree Fahrenheit
Properties: Antiinflammatory, Antibiotic, Antifungal

cannabigerol (CBG)
Boiling point: MP52
Properties: Antiinflammatory, Antibiotic, Antifungal

?-8-tetrahydrocannabinol (?-8-THC)
Boiling point: 175-178*C / 347-352.4 degree Fahrenheit
Properties: Resembles ?-9-THC, Less psychoactive, More stable Antiemetic

tetrahydrocannabivarin (THCV)
Boiling point: < 220*C / <428 degree Fahrenheit
Properties: Analgesic, Euphoriant

ß-caryophyllene
Boiling point: 119*C / 246.2 degree Fahrenheit
Properties: Antiinflammatory, Cytoprotective (gastric mucosa), Antimalarial


Terpenoid essential oils, their boiling points, and properties


ß-myrcene
Boiling point: 166-168*C / 330.8-334.4 degree Fahrenheit, Properties: Analgesic. Antiinflammatory, Antibiotic, Antimutagenic


d-limonene
Boiling point: 177*C / 350.6 degree Fahrenheit
Properties: Cannabinoid agonist?, Immune potentiator, Antidepressant, Antimutagenic

linalool
Boiling point: 198*C / 388.4 degree Fahrenheit
Properties: Sedative, Antidepressant, Anxiolytic, Immune potentiator

pulegone
Boiling point: 224*C / 435.2 degree Fahrenheit
Properties: Memory booster?, AChE inhibitor, Sedative, Antipyretic

1,8-cineole (eucalyptol)
Boiling point: 176*C / 348.8 degree Fahrenheit
Properties: AChE inhibitor, Increases cerebral, blood flow, Stimulant, Antibiotic, Antiviral, Antiinflammatory, Antinociceptive

a-pinene
Boiling point: 156*C / 312.8 degree Fahrenheit
Properties: Antiinflammatory, Bronchodilator, Stimulant, Antibiotic, Antineoplastic, AChE inhibitor

a-terpineol
Boiling point: 217-218*C / 422.6-424.4 degree Fahrenheit
Properties: Sedative, Antibiotic, AChE inhibitor, Antioxidant, Antimalarial

terpineol-4-ol
Boiling point: 209*C / 408.2 degree Fahrenheit
Properties: AChE inhibitor. Antibiotic

p-cymene
Boiling point: 177*C / 350.6 degree Fahrenheit
Properties: Antibiotic, Anticandidal, AChE inhibitor



Flavonoid and phytosterol components, their boiling points, and properties


apigenin
Boiling point: 178*C / 352.4 degree Fahrenheit
Properties: Anxiolytic, Antiinflammatory, Estrogenic

quercetin
Boiling point: 250*C / 482 degree Fahrenheit
Properties: Antioxidant, Antimutagenic, Antiviral, Antineoplastic

cannflavin A
Boiling point: 182*C / 359.6 degree Fahrenheit
Properties: COX inhibitor, LO inhibitor

ß-sitosterol
Boiling point: 134*C / 273.2 degree Fahrenheit
Properties: Antiinflammatory, 5-a-reductase, inhibitor

 

[TheMutzNutz]

That my friend is one hell of a response! Thank you for taking the time to put that together. Replying takes me a while sometimes with my fat thumbs and this stupid android keypad!

I didnt realise the haze case would fit a grinder too, I will be investing in one in the near future for days out. I think ive found one now, I wanted one big enough to fold out onto my lap for me to fill the cans and clean my haze etc.

I too have been sticking with the cans, if the screens maybe had a flap thst could fold over the top id use them more but like you say everthing gets gummed up. Im yet to see this red light. Mine just shut iff during heat up and wouldnt come back on. I had just nipped out and was giving someone a demo and it just shut off. Great demo! Its not done it since as I just charge each battery after a days usage.
When I first got the haze I was starting off at setting one and working my way up to number 4. I have since been skipping number one but might give it a go later to see if I notice any difference. You cant hslf tell the difference in her quality when vaping. I guess all the tobacco masked it. Im running low now and im down to most whispy buds id been avoiding!

Ive also been rebreathing as you say but find myself getting a bit out of breath sometimes. This could be down to the years of tabacco use. I had a go of a tobacco spliff before. Im not missing that one bit!

 

[C No Ego]

That my friend is one hell of a response! Thank you for taking the time to put that together. Replying takes me a while sometimes with my fat thumbs and this stupid android keypad!

I didnt realise the haze case would fit a grinder too, I will be investing in one in the near future for days out. I think ive found one now, I wanted one big enough to fold out onto my lap for me to fill the cans and clean my haze etc.

I too have been sticking with the cans, if the screens maybe had a flap thst could fold over the top id use them more but like you say everthing gets gummed up. Im yet to see this red light. Mine just shut iff during heat up and wouldnt come back on. I had just nipped out and was giving someone a demo and it just shut off. Great demo! Its not done it since as I just charge each battery after a days usage.
When I first got the haze I was starting off at setting one and working my way up to number 4. I have since been skipping number one but might give it a go later to see if I notice any difference. You cant hslf tell the difference in her quality when vaping. I guess all the tobacco masked it. Im running low now and im down to most whispy buds id been avoiding!

Ive also been rebreathing as you say but find myself getting a bit out of breath sometimes. This could be down to the years of tabacco use. I had a go of a tobacco spliff before. Im not missing that one bit!

Awesome man Glad to help... it is a transition for sure and your air capacity increases as you work that fresh air through... any types of breathing practices you do can help tremendously...I myself after stopping smoking have been to aware of funky society and Smells, especially cars yuk... and you will find LOL how important clean air environments are when you don't smoke your air... it is a transition from smoking to vaping and you picked a great vape to have a more solid vapor that's sedative and similar to smoking effects etc...
Once you have transitioned from smoke more to find the qualities of vapor the convection screen has a different experience than the dry herb cans... I think of it as not as heavy vapor, but you could turn the vape higher and still get heavy vapor..at a lower temp you can make a lite vapor that has different effects etc.. the convection screen will keep the v3 bowl cleaner than using the conduction screen which too has its own effects as well... that is the great thing about this device you can use different methods with the same strain to achieve different effects somewhat..
Here's a quick run down of what I 've gotten since owning the v3 a few different WPA water pipe adapters for the v3...If at home I use a bubbler to vape through,it really helps when using hotter vape temperatures..for the first few pulls I generally use the vape native to just get the terpenes and flavor from the herb to then transition over to a bubbler and finish the vape session. higher heat releases more sedative compounds as you will find posted in that chart above.. vaporizing is an adjustable way to medicate and once you get it down it works..
when I fist started using the v3 it took a few runs to break it in and eventually it ran quite a bit hotter on all heat settings , maybe why you are inclined to start at heat level 2 now? ... and your transition too possibly.. that's the great thing about vaping it gives you adjustment options to match your needs..

so, wpa- one glass wpa and three wooden 14 and 18mm wpa from @Ed's TnT to fit the bubblers... had a new one made recently as one of them broke
the haze case and little key chain holder for the cans and extra screens, extra cans, and batteries.

 

[TheMutzNutz]

I think I need to have a bit more of a play, ive only used thr conduction screens once. Think ill give them a blast tonight.

My next question was going to be about glass. What would I need for a cheap glass setup? I dont want.to spend loads yet as ive just gotten into vaping and sold my guitar to get my vape!
I keep reading on how great it is and wouldnt mind getting a cheap setup to try before investing more. Cheers

 

[C No Ego]

I think I need to have a bit more of a play, ive only used thr conduction screens once. Think ill give them a blast tonight.

My next question was going to be about glass. What would I need for a cheap glass setup? I dont want.to spend loads yet as ive just gotten into vaping and sold my guitar to get my vape!
I keep reading on how great it is and wouldnt mind getting a cheap setup to try before investing more. Cheers

http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/page-1000#post-1180305 there is the cheap glass thread for DHgate... I recommend either the D022 or the D022-d... the d022 is like 20$ and is 18 mm Dewar joint, the d022d is a few bucks more and bigger... for on the cheap for now you can use a tapered wine cork tapered to fit into the bubbler and drill a hole through it that you stick the haze mouthpiece into... make the hole just the right size so the mouthpiece snuggly fits and is air tight... or a @Ratchett adapter like in this vid... but you can emulate that design with a tapered wine cork too...

here is the youtube search query for bubbler and haze V3
https://www.youtube.com/results?search_query=+bubbler+haze+V3

Edit- the tapered cork I've used I made it to slide onto the side of the metal mouthpiece without the flare on it and slide it up the full length till it bumps that flared edge... just be sure to put the tapered side first to slide it onto there and then the tapered side will slide and bump against the flare... does that make sense?