NickDlow
Log Hog
It's the same OD of the stem but much more shallow, maybe an inch or so. The WonG itself is 14mm but that's just mine.
Here is a pic I already have. If u need a better one I'll do it when I'm home
Discontinued Haze Dual V3
- Thread starter mrweed
- Start date
It's the same OD of the stem but much more shallow, maybe an inch or so. The WonG itself is 14mm but that's just mine.
Here is a pic I already have. If u need a better one I'll do it when I'm home
little maggie
Well-Known Member
My Haze came today from puffitup. It's missing some accessories I ordered. I'd like to know from others who ordered there whether theirs came with a DVD that explains how it works? I think it's supposed to but I'm not sure. It is definitely more complicated than my Solo.
mixchu69
Well-Known Member
It is really hard to find a vape that tastes like ascent. It's up there with my minivap. Haze has great taste too, especially using straight concentrates in the can. Flowers are good too. Yet to have tried an herb sandwich mix.Hey all!
I'm still here playing with my loaner Haze vape. I must say it is a nice vape, though not quite as tasty as my Davinci Ascent in those first 2-3 pulls! Lately I've been using the conduction screens for my loads, the dual oven's is handy for packing a workday's load in one vape, without worrying about reloading on the go.
Anyway, I'm nearly finished making a universal silicone waterpipe adapter which will convert the Haze mouthpiece to a standard 14 and 18mm bubber (yes, it has both 14 and 18mm sections on the same adapter)
But in the meantime, I've been tinkering with a 3D printed stand to hold the haze and a few accessories (several batteries, brush, mouthpieces, cans, screens, etc)
Take a look and tell me what you think! I'm getting really close to finishing this project, so if you think I'm missing something, let me know what else you'd like to see
I hope to have both accessories finished and posted to my store sometime this week
I really like that they are getting publicity, as one FC member, said its good for the industry. I totally agree, and the haze is a great representative for the masses. The look, feel, and performance of the Haze will hopefully change the minds of the ppl for legalization. We are far beyond hitting flowers out of a glass pipe with a bic lighter. I think the visual difference of the 2 might help persuade those in the middle to be more open to mmj. But of course, we need funded medical tests to convince everyone.
Haze is a good representative to show the progress of this industry.
trevorzamani
Well-Known Member
I think that having a great product is just a bonus for the company. I think their name and how they handle their customers make the difference. As a consumer, people know that they are not wasting their money even if this product may not be the one for them. That is the most important to me. There are not many companies out there who provide this level of service with dedication. Usually when a business gets hold off your money, it is pulling teeth to get it back (if you can get it back). The fact that Haze stands behind their product make the difference.
I am a huge advocate for the legalization and freedom of choice when it comes to this. We need exposure, we need louder voice and we need bigger group/crowds in order to accomplish this. I was so glad to see that Haze was exposed to millions through Bill Maher. I watched the entire show and at the end, he also mentioned that he supports the legalization (as he always does). So things are progressing in the right direction and maybe soon, we can all put the word DISCREET behind.
virtualpurple
Well-Known Member
Nick be sure and give us your first impression of use!
I was impressed very impressed with the upgraded heat settings. I think that each setting now can stand on its own two feet. Unless I'm trying to get up to the higher settings in a hurry (bedtime) I now find myself stepping through the temperatures leisurely and enjoying each setting.
I was impressed very impressed with the upgraded heat settings. I think that each setting now can stand on its own two feet. Unless I'm trying to get up to the higher settings in a hurry (bedtime) I now find myself stepping through the temperatures leisurely and enjoying each setting.
c76man
In search of the best terps and smoothest vapor
Maybe my technique needs improving, but I have never approach a Solo-type cloudiness with my Haze at least when running through a water piece. Haze gives satisfying and effective sessions, though. For clouds, I prefer Solo. But the Haze beats the Solo in so many other ways.
@NickDlow
Like @virtualpurple I was also impressed at the upgraded temps. V2 was pretty much Temp setting 3/4 and I wanted more than just high temps. When i got my unit back all temps gave good performace and I found my fav temp. Im amazed at the clouds temp 2 gives off. Ill do a whole session on Temp 2 and maybe take three last draws on temp 3.
Like @virtualpurple I was also impressed at the upgraded temps. V2 was pretty much Temp setting 3/4 and I wanted more than just high temps. When i got my unit back all temps gave good performace and I found my fav temp. Im amazed at the clouds temp 2 gives off. Ill do a whole session on Temp 2 and maybe take three last draws on temp 3.
So I got my v2.5 haze today.... i fully charged the batteries and put them in on 4 until the auto shutoff after 5mins.I did that twice with the cans and the rubber tops,not sure what their called ,in there while I did the two burn offs. Soaked everything j iso and wiped down the bowls and air path with a tiny bit of iso on a Q tip.
Tried a convection screen with a full pack at 2 then 3. The vapor was nasty... i could taste the herb but I mainly tasted this rubber like, plastic acrid taste that was terrible. What am I doing wrong ?? I did everything I read about on here. I held a light up to the vaporizer and turned it on to 2 nothing in the chamber and the lid was open. Had it right side up and when I put the light near the mouthpiece/ air path area I could see a steady stream golf vapor coming out. Where did that come from ? It was a steady stream for at least 5 mins.
I absolutely don't want to inhale dangerous chemical etc etc
Help me guys
Tried a convection screen with a full pack at 2 then 3. The vapor was nasty... i could taste the herb but I mainly tasted this rubber like, plastic acrid taste that was terrible. What am I doing wrong ?? I did everything I read about on here. I held a light up to the vaporizer and turned it on to 2 nothing in the chamber and the lid was open. Had it right side up and when I put the light near the mouthpiece/ air path area I could see a steady stream golf vapor coming out. Where did that come from ? It was a steady stream for at least 5 mins.
I absolutely don't want to inhale dangerous chemical etc etc
Help me guys
Vitolo
Vaporist
I have never believed in lengthy burnoffs. (personally do not do any at all)
The following ideas are not meant to insult you, nor are they accusations... just my thoughts:
My initial impression is that wicks were left in the can.
The wicks come in a thick stack.
with no ejuice or tincture to vape on them there is a chance that they were releasing vapor.
Maybe top level (4) is too high to do two back to back sessions (burnoffs) with all wicks in place and dry.
Next impression may be that something was handled with oily hands.
It comes to mind that perhaps the black silicone cap was handled with unclean fingers and placed in touching oven walls instead of well in place in the can.
Just a couple of thoughts.
Haze will surely want to hear about this.
Last edited:
I think you misunderstood me sir. I never put the wicks in during burn offs. Just the cans with the rubber tops. They may have been touching the top of the oven but I tried it with nothing in the bowls ,no cans or anything , and that nasty smelling vapor still came out the top where the mouthpiece goes.
I wish I knew what was up... i honestly scared to use the 250 vape i just bought. I'm not bashing the product but that doesn't seem right to me
I know this is a great product and company so I must in the wrong ?????
I wish I knew what was up... i honestly scared to use the 250 vape i just bought. I'm not bashing the product but that doesn't seem right to me
I know this is a great product and company so I must in the wrong ?????
c76man
In search of the best terps and smoothest vapor
That is totally weird. I have not heard of any such issues to date.
Haze customer service is super responsive. Might be time to reach out to them?
Did you iso soak the lids too? I personally am very careful about soaking anything but glass and stainless in ISO. I try to only wipe other materials with ISO rather than soak, just in case since I don't have a specific solvent capadability chart for the specific material.
Haze customer service is super responsive. Might be time to reach out to them?
Did you iso soak the lids too? I personally am very careful about soaking anything but glass and stainless in ISO. I try to only wipe other materials with ISO rather than soak, just in case since I don't have a specific solvent capadability chart for the specific material.
NickDlow
Log Hog
Well I really don't need anymore time with the V2.5 to tell that it's AMAZING! I never realized just changing a couple temps would take the Haze to a whole new level.
Others have gone into detail about the 2.5 so there is no point of me doing the same. I will so though, my favorite experience by far was with the all purpose cans loaded with a shatter sandwich. Temp one provided tasty vapor from the herbs, temp two i started to detect the flavor of the shatter, temp three the shatter flavor took over but I could still taste the herb and temp four was all shatter. I was amazed I could distinctly tell the separate tastes of the materials.
This company never ceases to amaze me! I can't wait for what's coming next......
Others have gone into detail about the 2.5 so there is no point of me doing the same. I will so though, my favorite experience by far was with the all purpose cans loaded with a shatter sandwich. Temp one provided tasty vapor from the herbs, temp two i started to detect the flavor of the shatter, temp three the shatter flavor took over but I could still taste the herb and temp four was all shatter. I was amazed I could distinctly tell the separate tastes of the materials.
This company never ceases to amaze me! I can't wait for what's coming next......
Drspoiler103
New Member
Hey guys.
Just a quick question in regards to haze can size / bowl area .
I'm ( still ) looking for my first vape and have read a ton on the haze and liked ( most ) everything I've seen here and elsewhere - it truly seems like a fantastic vaporizer. However , I think I will tend to utilize the device primarily by myself ( not all of the time mind you ) , so considering my ridiculously low tolerance I'm still a bit skeptical about filling cans or screens with far less material than would be optimal. ( note : primarily using only dry flowers also , no concentrates/ wax , possible e-liquid )
Can anyone chime in on this concern ? In all likelihood I'd be using no more than .08 g to .10g per usage the majority of the time . Can I still find the haze to be a useful device given this concern or is it overkill and I may be better suited looking elsewhere ?
Thanks in advance !
Just a quick question in regards to haze can size / bowl area .
I'm ( still ) looking for my first vape and have read a ton on the haze and liked ( most ) everything I've seen here and elsewhere - it truly seems like a fantastic vaporizer. However , I think I will tend to utilize the device primarily by myself ( not all of the time mind you ) , so considering my ridiculously low tolerance I'm still a bit skeptical about filling cans or screens with far less material than would be optimal. ( note : primarily using only dry flowers also , no concentrates/ wax , possible e-liquid )
Can anyone chime in on this concern ? In all likelihood I'd be using no more than .08 g to .10g per usage the majority of the time . Can I still find the haze to be a useful device given this concern or is it overkill and I may be better suited looking elsewhere ?
Thanks in advance !
little maggie
Well-Known Member
I've tried my new Haze only 1x. I put only a little herb in. I don't know if it was the temperature I set it to or something else but I got no clouds. I'd like to get more information on that.
On the other hand, even with no clouds, I was adequately "medicated". As an aside, have you considered the Lily if you're only using herbs?
Drspoiler103
New Member
Thanks . I had considered the Lily.... But I'd prefer a battery unit to using a torch
trevorzamani
Well-Known Member
You either got a defect or this is not the product for you. I would contact Haze and I am sure that they will take care of you. Check out some of the videos on this thread if you think that you might be doing something wrong but if I were you, I would contact their support for assistance.
If you are looking for clouds, you should play with the settings. Go higher up on temperatures and try different screens especially the conduction screen. (that one gives me the most clouds at fine grind loose pack bowls). You mentioned that you were fully medicated so it is what needs to happen. For visible clouds, you should find the temp setting that you enjoy. Also, you can contact Haze to verify your version. If you own a V2, you will not see clouds at the first two settings. My V2 used to fully medicate me without clouds at settings 2 and 3. I used to get insane clouds at 4. The new V2.5, it medicates at all temperatures and provides the clouds at 2,3 and 4. Hope this helps