I kinda figured they would come back with something like that. It does make sense but you would figure they would have checked all that a long time ago.So I emailed them about the can prices and stuff here is their response...
Hi Nick
Your price always the same. There was an error on pricing earlier because the price of the screens were higher than the price of the cans where the cost of cans are much higher to us. We have corrected that. The site is brand new and we used a 3rd party company for design and content. We are still fixing the minor issues with the site. On the other hand, you are in our VIP club and your price stays the same for all future purchases. Just send us a note when you need anything and we will take care of it.
Amy
Hopefully u guts are VIP too lol
Yeah I think Scott uses them so he does not have to prep herb all the time at home. I got many cans myself but I use them when I am out. I pack all of them and go wherever. I use them all day without having to grind, clean, pack etc. I think this one feature alone sets this unit apart from everything else I own. At least for me.36 cans ? That does seem like going a little overboard since you can only use 2 at a time, someone could even think it's a bit .
Yeah. I get it. It sounds excessive but allow me to explain.Yeah I think Scott uses them so he does not have to prep herb all the time at home. I got many cans myself but I use them when I am out. I pack all of them and go wherever. I use them all day without having to grind, clean, pack etc. I think this one feature alone sets this unit apart from everything else I own. At least for me.
lol.
Just got an email from the seller of this vape and noticed that they used a quote from this thread that I made in their "review" image:
the 2nd post in this thread is the quote they used
http://fuckcombustion.com/threads/haze-vaporizer.13162/#post-560455
lol.
Just got an email from the seller of this vape and noticed that they used a quote from this thread that I made in their "review" image:
the 2nd post in this thread is the quote they used
http://fuckcombustion.com/threads/haze-vaporizer.13162/#post-560455
This came to me too. From VaporizerUSA. I saw some features discussed here on VaporSeller.com vape reviews section as well. Nice to be heard i guess...I see I was quoted too. This came from Haze or someone selling the Haze?
I see I was quoted too. This came from Haze or someone selling the Haze?
On another subject..... got my cans today. Gonna fill 'em up in a bit!
I think it is pretty cool, however it is a "review" but I've never used/seen the unit in person. I stand by my quote though, I would love it if my Pinnacle Pro had a removable battery. I refuse to buy smartphones without that option too. I think I'm going to try my hardest to do that with portable vapes as well (not too many options for that unfortunately).
Is this a conduction vape?
Congrats on your first run.And I made my first bho attempt.
Try at 4th setting which i like the most for dry herb...and i dont think the screens are necessary when using the canisters. They have their own lid. If you tried to use screens in the cans, that explains the difficulty of drawing and long heat up times i guess. The way i setup is either with screen by itself or with the can (with the lid on top) by itself at 3rd and 4th setting (i like the 4th setting the best especially with the can.About to throw in my review on the Haze after two sessions with it.
I received my package in a reasonable amount of time. However, the extra screens I ordered were missing from my order. Not sure this will be any big deal for me, but I will have to make contact about the mistake.
I threw my batteries on the charger, however I noticed that on the bottom of one of the spares had become unseated, revealing a small circuit board. It doesn't stay seated well in place when I push it back. I doubt I'll be able to use the battery. However, I may be responsible for this. The batteries look like they were individually wrapped in a plastic coating that looked like it should be removed...but maybe it wasn't intended for removal.
Now onto the vape:
For my first session I packed loosely broken herb directly into the canisters (no coffee grinder present). I attempted to use the convection screen with the oil can. The results from this really weren't great. With the first canister I did eventually pull out some clouds, but the vape had alot of difficulty coming to the appropriate temp it seems. On the second canister I got no visible clouds at all. However, my ABV was still dark in both canisters when removed.
I decided that although I was medicated fine at that stage I still wanted to see how I would fare without the convection screen in place, as I suspected that may be giving me trouble...so I popped in a canister without the convection screen and went right for setting number 3 (approximately 385 if I recall). What a difference! The unit went up to temperature much faster and I was getting very nice clouds without any difficulty whatsoever. I was a little absentminded and didn't time my session, but I certainly had no complaints.
My second session was last night, and was completed with a single canister of herb, again, just loosely broken. Once again, the unit performed great. Came up to temperature in a decent amount of time and gave some great flavorful hits. I tried to take a few puffs on the second setting but found the vapor clouds a little to wispy for me (I will try each setting individually in a future session) so went right back to the third setting, which is a pretty happy temp for me. I also made a temporary rig so that I could use my F-bomb diffuser and was able to draw some very impressive clouds. Later inspection revealed that the seal wasn't quite airtight. I will experiment hopefully tonight with an airtight seal and hopefully produce even better results. I realize the water tool nulls out the stealthiness of the vape, but I was curious and wanted to see what I could do.
I'm curious what sort of life everyone is getting from their batteries. It seems for me that my first battery drained off shortly after that 3rd canister.
I will continue to post with my future findings, as well as head to head comparisons between the Haze and the Ascent, as well as the Flowermate V. I will be trying to address efficiency, convenience, flavor, etc. If there are any qualities in particular anyone would care to see, please let me know and I will do my best to incorporate them.
Teach us the tricks Nick.Nice, it's good to see the word is spreading. I'm about to run to my local shop to grab somethings and I'm gonna ask him if he plans on carring the haze soon. They carry other top portable and plug in vaporizers, in that case this unit is a must. Just going to the shop to pick up accessories rather than waiting 3 days would be nice...
This replacement haze seems like its working better than my original. I'm glad that o ring broke lol I've been blasting through cans non stop and this sour d I have taste soo yummy the flavor with this unit is outstanding!!!
And I made my first bho attempt... Looks fairly decent, I'm just waiting on my vac chamber to be delivered to finish. I was a bit excited nd jumped the gun but I can't wait to taste it in my haze it's going to be delicious!!!
About to throw in my review on the Haze after two sessions with it.
I received my package in a reasonable amount of time. However, the extra screens I ordered were missing from my order. Not sure this will be any big deal for me, but I will have to make contact about the mistake.
I threw my batteries on the charger, however I noticed that on the bottom of one of the spares had become unseated, revealing a small circuit board. It doesn't stay seated well in place when I push it back. I doubt I'll be able to use the battery. However, I may be responsible for this. The batteries look like they were individually wrapped in a plastic coating that looked like it should be removed...but maybe it wasn't intended for removal.
Now onto the vape:
For my first session I packed loosely broken herb directly into the canisters (no coffee grinder present). I attempted to use the convection screen with the oil can. The results from this really weren't great. With the first canister I did eventually pull out some clouds, but the vape had alot of difficulty coming to the appropriate temp it seems. On the second canister I got no visible clouds at all. However, my ABV was still dark in both canisters when removed.
I decided that although I was medicated fine at that stage I still wanted to see how I would fare without the convection screen in place, as I suspected that may be giving me trouble...so I popped in a canister without the convection screen and went right for setting number 3 (approximately 385 if I recall). What a difference! The unit went up to temperature much faster and I was getting very nice clouds without any difficulty whatsoever. I was a little absentminded and didn't time my session, but I certainly had no complaints.
My second session was last night, and was completed with a single canister of herb, again, just loosely broken. Once again, the unit performed great. Came up to temperature in a decent amount of time and gave some great flavorful hits. I tried to take a few puffs on the second setting but found the vapor clouds a little to wispy for me (I will try each setting individually in a future session) so went right back to the third setting, which is a pretty happy temp for me. I also made a temporary rig so that I could use my F-bomb diffuser and was able to draw some very impressive clouds. Later inspection revealed that the seal wasn't quite airtight. I will experiment hopefully tonight with an airtight seal and hopefully produce even better results. I realize the water tool nulls out the stealthiness of the vape, but I was curious and wanted to see what I could do.
I'm curious what sort of life everyone is getting from their batteries. It seems for me that my first battery drained off shortly after that 3rd canister.
I will continue to post with my future findings, as well as head to head comparisons between the Haze and the Ascent, as well as the Flowermate V. I will be trying to address efficiency, convenience, flavor, etc. If there are any qualities in particular anyone would care to see, please let me know and I will do my best to incorporate them.
Try at 4th setting which i like the most for dry herb...and i dont think the screens are necessary when using the canisters. They have their own lid. If you tried to use screens in the cans, that explains the difficulty of drawing and long heat up times i guess. The way i setup is either with screen by itself or with the can (with the lid on top) by itself at 3rd and 4th setting (i like the 4th setting the best especially with the can.