Errlectric Concentration Station

NickDlow

Log Hog
Well damn nick. Mine is not like that at all. You have some chips on yours as well ?
Hmm..when I place the heater on the herb bowl I want to make sure it's secure but I don't want to break the glass if you know what I mean. Ill experiment the next time I dab off the herb nail since I'm out of flower:ugh:

Vice versa for me, no errl lol. But I make sure that little ring on the bottom of the heater is flush with the chamber. Perfect fit ever time.
 

CrazyDiamond

HAL is a StarChild
I still don't trust it...I mean if it did fall, it might have enough mass that if it hits glass, game over...that's why I just hold it with either hand and drop a dab with the opposing hand...you'll see when you come down, and speaking of, did that thread die or is my sub messed up on it?
 

NickDlow

Log Hog
Yea it got quiet over there.

Are u talking about it hitting your glass piece n break it? I leave my heater on the chamber for a bit and use my carbed drop down rather than picking the nail up n down.

I'm game to head down there regardless. My girl wants to do a Disney trip soon n I'll swing by on the way through. I'm thinking Oct or Nov hopefully.
 

Chandlerson

Well-Known Member
I found a sweet carb cap on Instagram for the full Quartz nail. Looks like a cheaper option before the preorder from errlectric.
 
Chandlerson,
  • Like
Reactions: SSVUN~YAH

NickDlow

Log Hog
I found a sweet carb cap on Instagram for the full Quartz nail. Looks like a cheaper option before the preorder from errlectric.

I've tried 3 carb caps from dhgate with no success. Their sizes are hit or miss so I wish u luck. You could get a pallet of them for $75 tho lol. My preorder is in already. Plus I've never seen a cap designed like this one and I just really want to check it out!

Most ig ones are ppl reselling dhgate shit. Unless you know for sure it's a blower of course.
 

Chandlerson

Well-Known Member
I've tried 3 carb caps from dhgate with no success. Their sizes are hit or miss so I wish u luck. You could get a pallet of them for $75 tho lol. My preorder is in already. Plus I've never seen a cap designed like this one and I just really want to check it out!

Most ig ones are ppl reselling dhgate shit. Unless you know for sure it's a blower of course.
Nah this isn't anything from dhgate haha. It's a Toronto based glassblower and I talked with a guy who uses it with his errlectric and FQN.ive seen videos and it looks like it works as well as it can.
 

CrazyDiamond

HAL is a StarChild
Yea it got quiet over there.

Ya it did, I was thinking we were all going to meet up at that one dudes house up near Jacksonville :shrug:

Are u talking about it hitting your glass piece n break it? I leave my heater on the chamber for a bit and use my carbed drop down rather than picking the nail up n down.

Yes that is what I'm talking about...I have let go of it a few times and it stayed put, put I still don't trust that it couldn't fall...better safe I guess that's just me, lol.

I'm game to head down there regardless. My girl wants to do a Disney trip soon n I'll swing by on the way through. I'm thinking Oct or Nov hopefully.

I'm not even an hour north of Disney.
 

CrazyDiamond

HAL is a StarChild
Last edited:

NickDlow

Log Hog
Show off...lol, jk

Edit: look at my profile, I allowed some settings to come through...there is a particular one coming up in a few weeks, lol....fuck I'm getting old

Another Edit: Just got an email and I know off topic..it's a pre-order, but what do you all think of this?
http://www.brotherswithglass.com/Pulsar-Glass-Honeycomb-Worked-Reversal-Dab-Rig-p/bwg-afgwp17.htm

$50 sounds pretty good but I never know with this stuff...just thought I'd share the info I received.

I personally dislike honeycomb percs, to much diffusion for my liking. Especially when the Errlectric is all about flavor for me.
 

NickDlow

Log Hog
Can someone tell me what I'd basically be getting with this package?
http://cannoisseur.com/collections/shop/products/errlectric-concentration-station-bundle-2

Looks like standard Ti nail with the heater stand, Ti cleaning brush, vortex carb cap and the case.

I personally would go with the herb nail and just buy a vortex carb cap seperate and I'll give u a Ti brush, I have 3 for some reason lol. The HerbNail comes with the heater stand too. Just no case, brush or carb cap.
 
Looks like standard Ti nail with the heater stand, Ti cleaning brush, vortex carb cap and the case.

I personally would go with the herb nail and just buy a vortex carb cap seperate and I'll give u a Ti brush, I have 3 for some reason lol. The HerbNail comes with the heater stand too. Just no case, brush or carb cap.
How much is the carb cap? Not being lazy, im out school shopping And can't research, LOL!Also if i didn't want to use the herb nail how would i dab without it on my average 18 mm female and 14 mm piece
 
They're $60 before discount. Idk what you're asking in the second part of that post.
If i were to break the herb bowl or just didn't want to use it, how would i use it to dab off one of my water pieces?All of mine are 18mm female and 14 mm male. I'm asking would i need another attachment if i didn't want or couldn't use the herb nail? I'm sorry if this seems stupid i don't know how enails work i know some nails fit universal others don't. This is something totally different that's why I'm asking. How do i dab off my water piece if i break the herbnail basically
 
Last edited:

NickDlow

Log Hog
If i were to break the herb bowl or just didn't want to use it, how would i use it to dab off one of my water pieces?All of mine are 18mm female and 14 mm male. I'm asking would i need another attachment if i didn't want or couldn't use the herb nail? I'm sorry if this seems stupid i don't know how enails work i know some nails fit universal others don't. This is something totally different that's why I'm asking. How do i dab off my water piece if i break the herbnail basically

First off just don't break it n u will be ok lol. If it did happen and I definitely do not recommend this but I'm pretty sure the nail fits an 18f joint. Don't put it on your rig and risk breaking it, but if u have an adapter that might work. But it is designed to be used the the chamber at all times.
 
First off just don't break it n u will be ok lol. If it did happen and I definitely do not recommend this but I'm pretty sure the nail fits an 18f joint. Don't put it on your rig and risk breaking it, but if u have an adapter that might work. But it is designed to be used the the chamber at all times.
This is what i was wondering. I want this strictly for dabbing. So considering its for my Wife I'd rather not have anything but a unbreakable parts. It needs to be as simple as possible because she'll break it without a second thought and look at me and say fix it and probably will have the audacity at that point to call it cheap! So yeah just want a Titanium nail, steel brackets, and a cap and Eerrl box!
 

NickDlow

Log Hog
This is what i was wondering. I want this strictly for dabbing. So considering its for my Wife I'd rather not have anything but a unbreakable parts. It needs to be as simple as possible because she'll break it without a second thought and look at me and say fix it and probably will have the audacity at that point to call it cheap! So yeah just want a Titanium nail, steel brackets, and a cap and Eerrl box!

Then that's the package for u bro!
 

DieHard

Accessory supplier
Accessory Maker
What size joints does the titanium nail fit? 14mm male or 18mm female or universal?
Edit: :further research answered my own question
The Ti nail fits both 18mm and 14 m. The herb nail heater fits on my claisen adaptor for use without the chamber. The 18mm female for the herb nail heater needs to be not too recessed. It doesn't fit my 18mm pieces with dewar joints.
 
Top Bottom