Ed's WoodScents Log Vape - Ed's TnT

TheVaporist

Man is a universe within himself
I'm sure you was sweating as hell! Glad that this building went all right :p

For sure, nobody can be mad at you for the delay.
It's a tough task with a lot to think a about, and you still have time to share with us as long as bringing us some news! So keep going we're all behind you!

Can't wait to have a thuya WoodScents in my hands!
 

Ed's TnT

Woodsman
Manufacturer
@Reflections Thanks for your understanding and patience I really appreciate that! Valentines will be good as any I figure, will announce here first of the release, I wont have many Thuya, will have it & Buckeye burl as well as Redwood burl for exotics in the first batch. They are going to be more expensive than the base domestic pieces so be prepared for that. I must also say that if I am not already doing it I am probably not going to for some time until I get everything ironed out and running smoothly with the addition of the WS to my normal sales. I am not doing custom matching pieces at this time, I just dont have time so a matching wooden stem or wong for the WS will have to come later down the road. Thanks for hanging in there with me again for the positive words!

@TheVaporist Same to you bro, your understanding and everyone elses here is a big deal to me and means alot. Believe me if I could rub a lamp and make things happen faster I would. Believe me the wait will all be worth it in the end. Hope all is well and wish you the best!
 

Ed's TnT

Woodsman
Manufacturer
Got some quick feedback for ya since the Ti internals went out -

- I use a variety of vapes because I like changing things up but when I'm reaching for a log it's going to be the WS most of the time. I will throw my HGL in occasionally because I like the direct draw glass stem setup I have with that but the HI and UD are officially out of there mix for me at this point. Really nice work Ed!!!

- idk if that was mentioned but the dry hits are smooth as ice. Compared to other logs this is my favorite to dry hit.

Was really happy to read this, there is alot more but dont want to give up the specifics just yet.
 

Ed's TnT

Woodsman
Manufacturer
Good afternoon,

@TheVaporist My man, Id say so bro, I got a feeling there is going to be a lot of head turning when in use by many many out there, doing double and triple takes/hits if you will!

@NizzyJones Hello and thank you for your post, I d say you are correct, I have a # in mind but dont wanna stamp it just yet, still got a lot of irons in the fire, loose ends to tie up and a few pieces left to acquire but am so close. Believe me the package will be oh so worth it, just the idea of it and not having to come back for this or that and not having me nickle and dime you for this piece or that will make it worth every penny, I assure you!
 

hoyo77

Well-Known Member
Good afternoon,

@TheVaporist My man, Id say so bro, I got a feeling there is going to be a lot of head turning when in use by many many out there, doing double and triple takes/hits if you will!

@NizzyJones Hello and thank you for your post, I d say you are correct, I have a # in mind but dont wanna stamp it just yet, still got a lot of irons in the fire, loose ends to tie up and a few pieces left to acquire but am so close. Believe me the package will be oh so worth it, just the idea of it and not having to come back for this or that and not having me nickle and dime you for this piece or that will make it worth every penny, I assure you!

dammit take my money already!!!
 

Buildozer

Baked & Fried
Got some quick feedback for ya since the Ti internals went out -

- I use a variety of vapes because I like changing things up but when I'm reaching for a log it's going to be the WS most of the time. I will throw my HGL in occasionally because I like the direct draw glass stem setup I have with that but the HI and UD are officially out of there mix for me at this point. Really nice work Ed!!!
70163384.jpg


Good luck doing your thing man..........................

:peace:
 

Eyedunno

Well-Known Member
I have a quick question about the pic on page 1. Does the metal plate with the three screws in it serve as the stopper for the stems/XonGs?
 
Eyedunno,
  • Like
Reactions: Ed's TnT

Diggy Smalls

Notorious
I have a quick question about the pic on page 1. Does the metal plate with the three screws in it serve as the stopper for the stems/XonGs?
Are you talking about the picture looking down into the log vape? If so, that plate is just what holds the whole heating element in it looks like.
Also, I just noticed that it looks like it won't accept the smaller stems that go inside the heater port, similar to enano. If this is true, it does change things for me.
 
Last edited:

Drexciya

Homage to the Deepsea Dwellers
I wanted a piece from you for quite some time now and I am hoping that a Woodscents log will be my first Ed's TnT piece. I might have to smuggle it into the house though, but I know for sure that the mere sight of it alone will be enough to silence all arguments of getting another log.
 

CarolKing

Singer of songs and a vapor connoisseur
I don't really care wether or not I can use certain stems with these WS logs. I'm sure that the vapor taste will be the most important feature. I do have an Enano and love it. I'm really excited for these pieces of wood art to be available for us out here in FC land.

@Ed's TnT is not going to release these until he gets them just right. He's very proud of what he puts out and stands behind his work. He can take as much time as he needs but we are all really anxious to see these launch out in the near future.

2017 will be an awesome year for the new Woodscents Log Vapes. The best of luck with the launch whenever it might be. In the winter there's nothing better to keep your hands warm. I know because my hands are continually cold winter or summer.:lol:
 
Last edited:

Ed's TnT

Woodsman
Manufacturer
Good afternoon everyone, gosh its been go go go round here, so I got the building wired up and power turned on Friday morning bout 11am, its been hard to do all I needed to do just having a 100' extension cord. Once I had hot outlets I had to build a work bench for all my machinery, its 20'L x 30"W seems like a lot of bench but its already full with most every outlet with a plug in it. I have hung all the lights and have quiet a bit of it, was out there late with my oldest that night working on all that and even up early early saturday morning laying out the floor plan and such. Alot goes into setting up a working floor plan, properly set it makes for a better work flow.

Got so much happening yall, had a great evening with my girl and her kids, my kids like her kids and her kids like my kids, gotta make our relationship easier! Got the boys Christmas program at church tonight, should be fun. Back out to the shop for a few before then, work work work yall, the excitement is building inside me, feel like I am going to explode!

@hoyo77 Bro you know I would like nothing more than to just take your money but you dont want me to do that just yet, you know I am a stickler and fairly anal about my work being just right, its close but not quiet there yet, wont be long though, everyday that goes by is just a day sooner. Ill take them dollars soon enough my man!

@Buildozer Ahh keep an eye peeled, there is much to look at!

@Eyedunno The metal plate you are referring to is the mounting base for the air path. Pls keep in mind what you see in the early pics on page one is similar but totally different. I dont want to go into specifics bout the internals yet but will say the air path has a necked down shoulder where the stem fits over. The stem tip has adjustable bowl depths within it.

@Diggy Smalls I will say this my man, no you wont be able to put stems with smaller tips within the air path like other logs have, that will not be possible. What I will say is that the stems that I have made for the Nano and the ones I made for the UD where the SS bushing fit over its heat port will infact work with the WS and there will also be another tip from a whole other different kinda animal that no one has ever thought of being used with the WS in this way throwing into account a whole different set of possibilities. I said before game changer, I hope this is the sort of change that works for you bro!

@Drexciya Ohhhhh I figure that to be the case, one has to have another log, one can not be made to be fit in a box, its just not human nor it is humane for one to do so to another!

@CarolKing Wow darling wow, thanks much for the kind kind words and enthusiasm for my work and the year ahead, its definitely going to be the year things turn, I got great feelings about it ahead and am sure after you all have these in hands you will be more than saying it was all worth the wait. Believe me I am not trying to build the hype, I am just saying whats so and why its so, like you said its got to be just right and without a doubt a heavy hitter, I dont do anything halfass, my mom told me that when I was a young teen, she said even when you screw up you go in with both feet, there aint no holding back and turning away!

I hope all is well and yall are ready for Christmas like my sons, I picked em up an Atari, found they are remaking them with I think its 120 games installed, going to be fun sitting round with them Christmas eve night spanking their butts in Combat, they are going to take a whooping old school!
 

Eyedunno

Well-Known Member
there will also be another tip from a whole other different kinda animal that no one has ever thought of being used with the WS in this way throwing into account a whole different set of possibilities.

See, saying something like this just gets me trying to come up with stuff. Aluminum oxynitride GonG? C'mon guys, that would be awesome. Hell, I want an aluminum oxynitride bubbler to go with it. :) (Aww, but aluminum oxynitride is pretty thermally conductive, so maybe just the tip then :p ) An air pump input for the bag vape people? Circus peanuts made of spider sugar (doesn't hurt the spiders)?
 

little maggie

Well-Known Member
So many creative products have come out of the Ed studio. Like my glass whip. And all the different stems. And wongs. There is no telling what he'll do next. It's great watching a creative genius developing to more complex items. I think this will be my final purchase. I keep trying new vapes and end up mainly using my milaana and vapcap. I'm not sure what to do with my box of rarely used vapes. But I know Ed's vape won't end up there.
 

jeffp

psychonaut/retired
Hi Ed, I just stumbled upon this thread and I'm very psyched about this. Good luck with it. Have you given consideration to the known issue of rattling with prior logs such as the MZ and PD? I am looking forward to owning and operating one...
 

Ed's TnT

Woodsman
Manufacturer
Good morning you all, wow wow what a great Christmas it was with the boys and my girl, this was my first year to have the boys all to myself for Christmas, we have it in the papers that we swap out the holidays from year to year so this was my year and how wonderful it was to be with them. Wound up having them for 5 days straight, there is 80 acres wrapped around me owned by a brother and sister living in a couple different states, so the boys and I struck out on a scouting adventure one afternoon, didnt figure we would be gone that long or cover as much ground as we did but sure enough 2 hours and 5 miles later is was getting late and the boys were spent. We were jumping creeks, spooking wild turkeys, even had to literally throw my youngest across a creek cause it was just to wide for him to jump or me to straddle, he was worried a bit but all was good when he was safe and dry on the other side. My middle son being a worry wart was nervous bout half way in and was wanting to turn back but by that time we were too far gone. He says ohhh dad I think I am going to be sick, not one to give in and baby him I was like hey you wanna be sick or you wanna get home before dark, not having a light of any sort I put one foot in front of the other and off we went. Another short while into our adventure he is asking me Dad are you sure you know where you are going, are you sure you know how to read your GPS lol, ohhh he was so not feeling very positive nor trusting my choice of directions, we trekked on. Finally bout 10 minutes before dark he notices an old barn near our place that he recognized he was right behind me and I heard him let out a big sigh and then said in his next breath oh Lord thank you Jesus, I let out a big laugh and was grinning, he picked up the pace with a passion I hadnt seen since the beginning, that boy was the first one at the house LOLZ. I took them to their moms after lunch on Christmas day then spent a few more wonderful days with my girl before I left for another truly epic goose and crane hunt in Lubbock, Texas. She has a couple kids a young son and daughter both great kids but their dad had them for the holiday so gave us good quality time together. The 28th I drove 13 hours to Lubbock picked up my cuz at the airport headed tot the lodge. Both hunts were like the ones you see on the outdoor channel where you have so many birds coming in that its just so overwhelming and incredible, first day we had a 10 man limit in 30 minutes, 2nd day another 10 man limit in 25 minutes, we spent more time setting up and picking up then we actually did shooting, we were in and out leaving the field just as we entered it, picked up and put away any trace of human activity, gosh mother nature is a beautiful sight. Left out the 30th east bound to Little Rock, my girl had the kids doing time at her moms there, cut my drive by 5 hours, didnt have to get a hotel, and got to meet her mom and family how cool. Spent the night there then southbound to get the boys for new years eve, Carters Bday was the 2nd, he wanted to have a party on new years eve so I stopped Walmart grabbed a cake and a couple candles to make 13 geez, these boys are going to be men in no time and I will be an old man before I know it. We did lemon pepper crusted crane steaks on the grill with veggies ohhhh and cant forget the kings Hawaiian rolls, not sure you all do those, if you dont you so gotta try em, dont be that guy and say nah nah they arent for me, believe me they are so for you and everyone else, the boys love em! Carter has so been wanting a 20 gauge semi auto, got a sweet deal on one, will be a great piece considering he and I are headed to south Texas end of this month for one last duck hunt, his first in Texas should be popping. Also be a great piece for 4H which will be kicking off in a couple months. These boys, they are so going to be going off this year, air rifle & pistol, archery, .22 pistol & rifle, & skeet, 4H will be a lot of fun in 17!

I cant say it enough yall, 2017 is going to be an amazing year, am so so enthusiastic bout my life with my sons, my girl, her kids, the biz, gosh what a positively encouraging feeling it is to have to wake up to every morning the Lord blesses me with!

@little maggie Oh my darling, ohhh we are so so close, I am giving it my all shooting for way before march, I cant wait any longer, gotta get some dough back to prepare for the second batch. I really appreciate all your continued support over the years, you have been there for so much, I hope your last big purchase is all you hoped it would be and then some!

@Eyedunno My man, ok ok so its been killing me keeping my mouth shut all this time, since I am so close and just waiting on the final components to be in hand for assembly I am going to let you in on what I have been up to. As you all know I am going Ti, well who do we all know that is a whiz at Ti, who have I worked with and done pieces for which were incorporated into a Ti portable piece? Its just a no brainer, he and I have been talking and working with each other on the WS project since late September I wanna say on this idea, the beta testers have had the Ti WS and have had great performance with it. The internal airpath and mount will be completely made of Ti, the WS stem will utilize a VC tip. That being said you will be able to use any VC a user already has with the WS, you will not use the VC cap at all with the WS, there will be no need for that. You will simply load your WS stem or VC as you always have then slide the tip over the top of the airpath then draw to get thick rich vapor simple as that. Am so so close and must say there is so much more to come down the road that this is only the beginning. I cant express my excitement and enthusiasm to be working with George on the WS and having him be such an important part of this units creation and development past, present, and future!

I know there will be many many questions asked regarding this news, I want everyone to know that at this point I am keep it very simple, yes this is a big deal and this will open the door to so many possibilities in the future but at this time and for right now I am going with the principle of KISS, I am sure and hope you all understand.

Also @Eyedunno I am going for a base domestic line of Walnut, Maple, Cherry, & White Ash. I also will have a high end offering of a few choice burl species of Buckeye, Thuya, & Redwood. I also want you all to keep in mind that the WS will have a complete Ti internal airpath and mounting base as well as a Ti tip, its med grade and not cheap, there is quiet a bit of Ti going into the WS, it will cost quiet a bit, overall the offering will be well worth every penny. The domestic base will be cheaper than the burl choice species of course. I have even just acquired some rather large chunks that will make for a priceless package never been done before.

@phattpiggie Ohhhhhh my man dont you know, dont you know, woot woot!

@jeffp Wow my man, been a while, its so good to see and hear from you bro! Many many of you here at FC dont know but Jeff is the guy that brought me to FC, he got a dugout from me long long time ago I wanna say, either he got one or found that I made em had me post up one thing led to another then I was doing a dugouts combustion related thread here. Jeff encouraged me to reach out to PD and MZ to make wooden stems, @Rick was very polite and friendly as well as helpful, one thing led to another and here I am today. Much much longer than when we first spoke of my intentions right Jeff? But never the less better late then never! Gone are the days of the old heater setup used in those 2 logs, the WS will be using a similar airpath setup many here are familiar with. Gotta give you a big big thanks for your invitation to me several years back and encouragement here at FC as well as many others that has brought me to where I am today, THANK YOU ALL!

I will post up pics and all that very soon so hang on, this ride is about to get started, buckle up its going to be an exciting journey I am thankful to share with you all!
 
Last edited:

TheVaporist

Man is a universe within himself
Hey Ed! Happy new year dude!
What an awesome end of the year for you, I'm happy to see all this love!

And then, this awesome news, being able to play with our awesome vapcaps with your "over the top log" , this is your Christmas gift to us! I'm sure we didn't realize how much we'll be blown away!
Things are gonna be fun and full of surprises!

I already smell this wonderful thuya, who's coming to me someday :science:

May 2017 be the best for you Ed!
 
Top Bottom