Ed's TnT Wooden Vapor Tubes & Vapor Stems

Ed's TnT

Woodsman
Manufacturer
Dilaudid oral sucks... Any other way :zzz::zzz::zzz:

prolly ran through a couple liters of it in the hospital. Stay safe and don't take those if you dont need them ;)

Thanks my man, yeah I have only taken 4 since last week, like I said they do nothing for the pain just keep me awake, that sucks, I am a guy that likes my sleep and 8 hours is a must, if I dont get them then then I am hunting what I am short somewhere through the next day.

Ugh I am currently in the process of trying to restore my youngests Ipod, he just got it in his head he had to have a passcode and wouldnt you know it he doesnt remember what it is, ohhhh apple sucks!!! Been on the phone with them trying to do a restore, they were supposed to call me back a at least 30 minutes or more ago and havent, the thing still isnt fixed and they are like do you have an apple store near, yeah right! Thankfully I have to go back to Bham tomorrow and they have a store there, gosh what does a 7 year old need a pass code for, oh did I mention I dont like apple, I a total android guy but because of my boys I had to get a stupid iphone, ughhh! These boys are going to drive me crazy!
 

vaplen

Well-Known Member
"Ugh I am currently in the process of trying to restore my youngests Ipod, he just got it in his head he had to have a passcode and wouldnt you know it he doesnt remember what it is, ohhhh apple sucks!!!...gosh what does a 7 year old need a pass code for..." :rofl::rofl::rofl:

Too funny haha

Android all the way :borg:
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Good morning everyone, hope all is well out there! So looking forward to Christmas with my boys and my girl, cant wait to see the faces of my boys when they open what they think is a zombie apocalypse survival kit, thats going to be so funny!!! I have had Carter out in the shop learning the fundamentals of turning pens, he is getting the hang of it and his skills are really progressing, I feel he will turning out some beauties before we know it. Not sure I mentioned it or not but he told me I could take back his Christmas gifts so that I could buy the tooling for him to start doing it, how cool was that? I am waiting for one of my companies to open to make sure that I am getting all the right tooling in this kit offered on Amazon. Will be fun to watch his biz start and grow. So I got the Haze order out, took some late nights and some ups and downs, the WPA universal adapters take so much time, with all the different sizes and such I can take my time I do it from the largest to the smallest first, turn the last smallest shaft lastly where the wall thickness is so thin that under the pressure and spinning so fast it may have a tiny crack, ohhhhhh that sucks so much, to take all that time get it just right and see a split, the bone yard has several of them in the pile. Going to be back at work this week doing custom stuff. My procedure went well, as well as could be expected just sore as heck. They got me on Norco and Dilaudid, uhhh say what! Its a trip I have never taken Dilaudid and what I hear its super strong, crazy thing is it does nothing for me other than keep me awake, it does nothing for the pain, I dont get it. Am eating Norcos and doing my best to get everything done. Everyone is telling me to take it easy and take my time to heal, I am doing all I can to make that happen, as far as work doing it or not really doesnt have anything to do with the healing process for my issue so I gotta make it happen yall. Its really hard for me to sit still no matter what, even if I was perfectly fine I cant just do nothing, I am a mover and shaker, I got to be doing something, I am not one to let the grass grow between my toes ever. So I expect to get some work done this week, going to try and get it all done and enjoy Christmas but if I dont get the whole list knocked out I am damn sure going to put a dent in it! I will surely let you know how opening the present goes with the boys, am so ready for that!

@Reflections Really glad you like that piece and hope you enjoy it for a long time, maybe your old man will let you use it some here and there, lol!

@momofthegoons Thanks so much for giving him the work, I really appreciate what you do and who you are, such a wonderful heart and spirit, you are a blessing to all! I dont blame you, I freaking love that piece on the right, gosh that is my favorite for sure. What nice gifts, great idea!

@nosmoking Yeah I saw that bro and thank you for spreading the word, the shots look great and gotta thank you for getting some buzz started, already have a few inquiries for getting some work done for that vape. I really liked that bloodwood stem, very neat detail and the contrast in tones makes a sweet pair.

Anyhow, I wish everyone a merry merry Christmas and safe holiday, enjoy your time, friends and family as will I! I thank you all for this last year and so look forward to the year to come, got great feelings that 2016 will be epic and my year!

Glad to hear it went well Ed! Hope you get back to feelin 100% (or close to it at least) soon! Happy Holidays brother!
 

bounce5

Well-Known Member
My Ed's tnt stems sitting on my log's
Thanks again Ed. Edit:And @Snappo he supplied the blanks... Vaked
sb5juXM.jpg

I've never seen a J-hook that stands up like that. Where did you get that J-hook for the Vapman?
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Merry Christmas and a Happy New Year @Ed's TnT I think it is fair to say we all appreciate you too buddy!
I've never seen a J-hook that stands up like that. Where did you get that J-hook for the Vapman?
It's empire glass and has a mouthpiece that @ataxian would really appreciate. @Melting Pot is just a magician making it stand so picture worthy with its golden goo lining. It's been in a few FC hands now but was purchased from the Cupboard in Cincinnati.
 

Eyedunno

Well-Known Member
Ahh, the Cupboard. I still have a few pipes I bought either there or at High on the Hill around 1997-1999. I'm pretty sure for one that that's where I bought my favorite metal pipe--there's nothing special about it at all, just a standard lamp parts pipe with a purple anodized chamber, but it has some sentimental value to me because I've had it for 18 years. And I plan soon to try converting it to a Vaporgenie. :)
 

Ed's TnT

Woodsman
Manufacturer
Good morning everyone, hope you all are off to a great start for the day and are all looking forward to Christmas as much as I and my boys are! I gotta be honest I dont think they are that enthusiastic about the thought of zombie survival gifts, lol! Cant wait to see them smiling from ear to ear tomorrow, whooohooo! Anyhow all is good down this way, been in the shop knocking out custom stuff here and there, one or two here one or two there, slowly but surely its all coming together. Was doing a Vapman wong and stem for a guy, had to really take my time, alot of times when I get wood for custom stuff from @Snappo I have some of the same species and if it doesnt go well I can yank a piece from my stock to make up for it, but this particular piece as with alot of Snappo's rare and beautiful woods I dont have any for backup so had to take extra special care and time when working, just the two pieces alone took me an hour with many many many times measuring and taking a little off measure and take a little more off, all said and done made for an amazing couple pieces. Will shoot the stuff and have S&T next week. Made a trip out to Bham yesterday to follow up with the dr, she says things are looking good so I am hoping this is the last time I am in this spot again and praying all is solved this go around. Headed out to my girls later for Christmas with her and her family, they open presents at midnight, thats a new one for me, we just got up at the crack of dawn when I was a kid and opened presents, when I had the boys we just waited for them to wake up about 7 or 8 and opened then on christmas morning, gotta be honest, I am not one to do these late nighters anymore like I used too, I hope I make it til then and if so wont be but soon after going to be lights out and sawing logs!

@vaplen Yeah yeah yeah, did I mention I hate Apple, ughhhh! I feel ya, am so an android guy, stupid apple stuff. Went to the apple store yesterday and got my youngests ipod fixed, only took a few minutes and now he is back in business after we had another quick talk about no passcodes. We are texting back and forth now so he is up and running cooking with gas! Ohhh yeah Apple sucks :disgust: :shit:!

@Shit Snacks Thanks alot my man, appreciate that! Been thinking about that wong piece we spoke about, am almost there with it, remember how we spoke about the piece coming out of the unit into the downstem/wong adapter, what do you think about the downstem having a hole all the way through it? Am thinking that where it comes out of the unit and fits into the downstem that the hole all the way through could be used as a carb, when you have the unit hooked up and the downstem/wong in your water tool you could just put a finger over the top of the downstem and when you have filled the water pipe you could remove your finger and shazam clear the pipe and not have to yank the unit or the wong. Whats your thoughts boss?

@bounce5 How bout it my man, @Melting Pot sure has some nice rigs and is clever at popping shots as well I see! Hope all is well for you!

@SSVUN~YAH Thanks my man, I am always glad to hear from you and your kind words always do me good bro! I wish you and yours a merry Christmas also and many many blessings in the new year homie!

@ataxian Hey hey, how you been? Hope all is well and hey ya never know, there is always something I am cooking up round here, might even be something new that might interest you below. Be well my good man and stay safe!

@Eyedunno How bout it, hope you are having a great start to your day!

@Melting Pot A little magic huh, gosh sometimes setting up for product shots are so tough, especially when all my stuff is round, it wants to slip and slide here, turn this way and never ever wants to do what I want it to, sometimes shooting pics for S&T is some of the hardest work I do. Well done, maybe you could tell me what to say and how to wave my wand to make it a little easier next time!

@Quetzalcoatl Good morning my friend, gosh what a evening and night it has been here in my state, a couple twisters went through, one to my west quite a bit and another north just as far, I am fine, got windy for me and very little rain, but others werent as fortunate. I want to say 3 people were killed including a 7 year old boy, gosh my heart aches for his family and for all that lost so much, I can only imagine not seeing my youngest smile again, he is 7 and has the brightest smile with his two upper front teeth growing in, my God I know he is with that child and his family. One of the areas there were 20 houses destroyed, there were presents under the tree and so much excitement yesterday only to be taken away and nothing left the next by Mother Nature. Its very sad but I am thankful all is well for me and mine. Its another one of those crazy southern days down here again, was 80 yesterday with a chance of rain and here we are today with a high of 77 so they say with another chance of rain, same for tomorrow but a better chance of rain and storms. Thanks for thinking of me brother, means alot and pls keep us all in your thoughts and prayers for the holidays as I do you all as well!

@MinnBobber Yeah you are so right, we were talking yesterday when I had the alert come through my phone, so thankful it didnt get bad in my area as we are in a bad spot where they tend to travel. Have mentioned it back many pages, my neighbor is on his second home, was a wood frame house he built long ago, he had a storm shelter as we all do here and when it came through him and his wife spent the night in it only to find their home was no more. Now its brick, not to say that it will make it, all just depends on what MN wants to spin our way. Thanks also to you for thinking bout me down here!

@Snappo My man my man, I wanted to save you the best for last and not leave you out so bout them eggs & grits, you right, nothing like some salt & pepper to make them taste just right! Hmmm whats these do for ya?

SampP%20Shakers_zpsewzr7skj.jpg


3 1/2"L just at 1 1/4"OD similar shaped to a wong and in the most figured Cocobolo I had in size enough to make these. Ya know I have more Cocobolo that has some really fancy tones and colors but those pieces are much smaller OD, dont have a whole lot of this species large enough to make them so hope you like what you see! Will get these out to you first thing Monday, sorry they arent there in time for Christmas but at least you get to see them before rather than after! Merry Christmas my friend!

Merry Christmas to all yall, I wish everyone the best, hope you get what you want and also like what you got, be thankful for what we have and dont sweat what we dont, a day above ground is better than one below, be safe and enjoy the times you have and make memories that will last the rest of your days!
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
@Shit Snacks Thanks alot my man, appreciate that! Been thinking about that wong piece we spoke about, am almost there with it, remember how we spoke about the piece coming out of the unit into the downstem/wong adapter, what do you think about the downstem having a hole all the way through it? Am thinking that where it comes out of the unit and fits into the downstem that the hole all the way through could be used as a carb, when you have the unit hooked up and the downstem/wong in your water tool you could just put a finger over the top of the downstem and when you have filled the water pipe you could remove your finger and shazam clear the pipe and not have to yank the unit or the wong. Whats your thoughts boss?


Ah very interesting Ed, could be a neat idea in general. My concern with Lily though is it already had the 3 carb holes at the top, so my hands would be used there and with the torch, leaving no free hand to cover the WonG carb... If I didn't use the top 3 carb holes it would be great, but I often use at least one during a session even if I don't start with it. I also will use it pointed upside down too, with a 18mm Hydratube or bent glass mouthpiece, so a limit there perhaps as well? Might be a good idea to apply to another vape perhaps? Look forward to seeing what you come up with man!

Happy Holidays and be well!
 

Ed's TnT

Woodsman
Manufacturer
Ah very interesting Ed, could be a neat idea in general. My concern with Lily though is it already had the 3 carb holes at the top, so my hands would be used there and with the torch, leaving no free hand to cover the WonG carb... If I didn't use the top 3 carb holes it would be great, but I often use at least one during a session even if I don't start with it. I also will use it pointed upside down too, with a 18mm Hydratube or bent glass mouthpiece, so a limit there perhaps as well? Might be a good idea to apply to another vape perhaps? Look forward to seeing what you come up with man!

Happy Holidays and be well!

Ahhh shows how much I know right, so much for that idea bro, thanks for letting me know!
 

Ed's TnT

Woodsman
Manufacturer
Good morning everyone, I hope you all enjoyed Christmas with family and friends! Mine went very well, did the holiday with my girl and her family, was up til 2am Christmas eve night, gosh what a night, had to drink a cup of coffee about 10pm just to make the final hours. Was a wonderful celebration, my girl got me a nice pair of Under Armor running shoes, uhhh hint hint, gotta get my butt in gear the new year and she is going to be my inspiration to get myself back in shape and in my fight weight, got a few new shirts which is always cool and some socks from the boys, who doesnt need socks right! So I got the boys Friday about noon, brought them home and we began opening presents, got to the Zombie book and they were kinda like oh no dad really, then they opened the PS4 and saw all the games so it was on! Got it all unpacked and hooked up, about a week or so I got a new surround sound receiver as a gift to myself, I had been wanting one so went in walmart and low and behold at the clearance rack wouldnt ya know it, a Pioneer unit was selling for $198 normally was marked down to $80, uhh say what, how could this be, not one to pass up a deal I snatched it up and off to the house it went. So after setting up the PS4 I attached the mic to the unit and placed it back in the living room, let it do its thing and calibrate its settings, got dialed in and we were playing Mortal Kombat X in full on surround sound. Was really neat hearing me get my butt destroyed in HQ sound. They knew all the moves, were putting on me and freaking ripping my head off, sending me flying through a spinning sword, reaching into my body ripping out my heart and even snapping my spine from within, wow what sounds! After many attempts at trying to redeem myself unsuccessfully that was enough and I left it to my boys the pros, lol! I ordered Carters tooling for turning pens, wasnt supposed to be here until after the 2nd when his Bday is but hey seems UPS can get it right and did so really early, he doesnt know it yet but am going to give it to him a little early while he is still out on break and get his butt out in the shop turning pens. The kit came with 5 pen sets so a nice start to getting his biz off the ground. Cant wait to see some of the beautiful 2 tone Amboyna pens he will be turning from my piled up prize stock, should be show stoppers! All is well, going to take the night off from church this evening Kyle has a cough, Carter is running a low grade temp, and just hoping Connor doesnt catch it. My girl is with me, so probably going to run into town, pick up something for dinner and watch a red box, cant go wrong with that.

@Snappo Cant wait to get these out to you tomorrow, really anxious to hear what you think of this set. They were really fun to make and I am still surprised they turned out being my first go at it. The capacity within is rather large so you should have enough S&P inside to last a while. Even had to create a new piece of tooling to turn them which gives me a neat idea for another idea I have. Hope you had a great Christmas and got to see your children, know they are quite a bit older than mine, probably harder to get them there at the same time, I am not looking forward to those days.

@ataxian Same to you chief, take care!

@Melting Pot its great to hear from you and hope you, your son and little girl enjoyed yalls time together! I did get down at the dinner table, I am not one for seconds I grab 2 plates and then go back for a drink, lol! Had so much turkey, ham, dressing and deviled eggs, gosh these had bacon in them, thats the only way to do it, nothing like bacon and eggs ever.

I wish everyone all the best and wish you all a safe week ahead and so so many blessings in the new year, 2016 is the year, alot of good days are ahead and great times to be had!
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Good morning everyone, I hope you all enjoyed Christmas with family and friends! Mine went very well, did the holiday with my girl and her family, was up til 2am Christmas eve night, gosh what a night, had to drink a cup of coffee about 10pm just to make the final hours. Was a wonderful celebration, my girl got me a nice pair of Under Armor running shoes, uhhh hint hint, gotta get my butt in gear the new year and she is going to be my inspiration to get myself back in shape and in my fight weight, got a few new shirts which is always cool and some socks from the boys, who doesnt need socks right! So I got the boys Friday about noon, brought them home and we began opening presents, got to the Zombie book and they were kinda like oh no dad really, then they opened the PS4 and saw all the games so it was on! Got it all unpacked and hooked up, about a week or so I got a new surround sound receiver as a gift to myself, I had been wanting one so went in walmart and low and behold at the clearance rack wouldnt ya know it, a Pioneer unit was selling for $198 normally was marked down to $80, uhh say what, how could this be, not one to pass up a deal I snatched it up and off to the house it went. So after setting up the PS4 I attached the mic to the unit and placed it back in the living room, let it do its thing and calibrate its settings, got dialed in and we were playing Mortal Kombat X in full on surround sound. Was really neat hearing me get my butt destroyed in HQ sound. They knew all the moves, were putting on me and freaking ripping my head off, sending me flying through a spinning sword, reaching into my body ripping out my heart and even snapping my spine from within, wow what sounds! After many attempts at trying to redeem myself unsuccessfully that was enough and I left it to my boys the pros, lol! I ordered Carters tooling for turning pens, wasnt supposed to be here until after the 2nd when his Bday is but hey seems UPS can get it right and did so really early, he doesnt know it yet but am going to give it to him a little early while he is still out on break and get his butt out in the shop turning pens. The kit came with 5 pen sets so a nice start to getting his biz off the ground. Cant wait to see some of the beautiful 2 tone Amboyna pens he will be turning from my piled up prize stock, should be show stoppers! All is well, going to take the night off from church this evening Kyle has a cough, Carter is running a low grade temp, and just hoping Connor doesnt catch it. My girl is with me, so probably going to run into town, pick up something for dinner and watch a red box, cant go wrong with that.

@Snappo Cant wait to get these out to you tomorrow, really anxious to hear what you think of this set. They were really fun to make and I am still surprised they turned out being my first go at it. The capacity within is rather large so you should have enough S&P inside to last a while. Even had to create a new piece of tooling to turn them which gives me a neat idea for another idea I have. Hope you had a great Christmas and got to see your children, know they are quite a bit older than mine, probably harder to get them there at the same time, I am not looking forward to those days.

@ataxian Same to you chief, take care!

@Melting Pot its great to hear from you and hope you, your son and little girl enjoyed yalls time together! I did get down at the dinner table, I am not one for seconds I grab 2 plates and then go back for a drink, lol! Had so much turkey, ham, dressing and deviled eggs, gosh these had bacon in them, thats the only way to do it, nothing like bacon and eggs ever.

I wish everyone all the best and wish you all a safe week ahead and so so many blessings in the new year, 2016 is the year, alot of good days are ahead and great times to be had!
Happy New Years Champ!
images
 

Reflections

Well-Known Member
Sounds like You Had a fantastic Christmas Ed!! So glad ! Cant wait to see the pens also..and believe it or not we got the beautiful bog stem on Christmas eve..thanks so much..it vapes wonderfully..we both have been sharing it lol...Happy New Year to all!
 

Ed's TnT

Woodsman
Manufacturer
Sounds like You Had a fantastic Christmas Ed!! So glad ! Cant wait to see the pens also..and believe it or not we got the beautiful bog stem on Christmas eve..thanks so much..it vapes wonderfully..we both have been sharing it lol...Happy New Year to all!

Thanks so much, I appreciate you! Hey so what do you think of the removable bushing and oring design for that piece? I am very anxious to know. pls do tell!
 

Ed's TnT

Woodsman
Manufacturer
Good afternoon, been trying to get caught up and still working on custom stuff, gosh I didnt realize just how much I had on my plate and still have more folks wanting work done as well as order after order of wholesale stuff coming in. Pls hang in there with me everyone! Got some out today and will be getting more out this week. Not my usual ship days but gotta do what I gotta do to get ahead of the load.

So anyhow, times being the way they are and all the craziness in the world even here in the US I thought that I might oughta pick up a little protection for myself and family. I went to my local gun dealer and found this little beauty still marked down from black Friday, regular $540, got it for $400 with a couple 12 round clips, added a couple boxes of target rounds and a box of Hornady Critical Defense 9mm ammo. What a freaking weapon, was grouping the first couple mags at 20 yards in a 6" circle, I feel I should be able to stop any threat if needed to with maximum force!

SampW%20MP%209C_zpspcy9djgc.jpg


Even thought to get a laser sight mounted in the back strap but found out it was an additional $220, figured I didnt need that after all. My guy said yeah thats what everyone else says. Feel I got a heckofa deal and in a month or 2 will apply for my concealed carry permit, then maybe even my enhanced carry permit. Might as well take advantage of my second amendment right while I still have it!
 
Top Bottom