Ed's TnT Wooden Vapor Tubes & Vapor Stems
- Thread starter Ed's TnT
- Start date
radiantchipmunk
Well-Known Member
this bad boy came in the mail a few days ago.
It's a custom Enano Wong by Ed's TNT.
species: blackwood
custom attributes: -really professional, quality finished grooves. it's so classy looking and really goes well with the Enano in aesthetics.
-custom sized casing(3/4 inch taller from screen than normal)
This came as a replacement to the last Wong I received a few weeks back. pictured below.
While the Wong above was absolutely beautiful. I had problems with the casing being too small and the end result was my product charred at 6.5! That made me quite upset and so I shared my concern with Ed. Ed then promptly got back to me and was very concerned about my satisfaction(you just don't find customer service like that anymore!) We talked about the issue i was having and also about the solution to fix it. Within minutes the problem was resolved and he assured me a new one would be on the way, free of charge!
I received my new Wong end of last week. My pictures might not do it justice but these little accessories are more than just that. They are amazing pieces of art. Many people express themselves in their art and it's painfully obvious that Ed pours his self expression, passion, and love into his work.
I'm happy to report there is also no more charring going on, even at higher temps. The flavor is amazing and is milkier than our galaxy. The durability is second to none.(dropped on concrete not a scratch, bump, or chip)
This truly was a near perfect experience. I say near perfect well because I'm a very critical customer. For some reason in my head I imagined that my replacement would have came with some inlay as the original did. So at first I was a little bummed because, well, even though I have an inlay Wong, it won't get any use beside being a glorified Wong paperweight.
But after a good week of usage the absence of inlay doesn't bother me as much. The beautiful grooves more than make up for that and I'd have to conclude that I am a very satisfied customer. I tell all my friends about Ed's TNT lol!
Onward mates! I've seen Ed's new medical grade 2 titanium dabbers...and wow! I am very interested. is there anyway you can shape the tip of the dabber to look like a tiny tiny two pronged fork instead of a straight point?
Thanks for reading ya'll!
Hello and good afternoon everyone, its been a hella start to the week. Left out the other morning to run errands and handle what nots and a couple honey do's, there was a dog on my side of the road, he saw me coming and went in the direction of the opposite side, I slowed down a bit but not enough, the freaking thing turned a 180 and ran in front of my truck! Oh it wasnt good, not at all. He wasnt an ordinary dog, he had some size on him and really did a # on me. Had to have the thing towed to the repair shop and claim it on insurance and all that. Now I am without a vehicle, the guy at the shop couldnt even give me a ballpark finish date. I am lucky though, Mrs. Ed helped with all the first of the week duties like shipping and supplies which was very helpful. Thankfully everything else I needed will be delivered. So wont be making a special last minute shipping runs to town this week. With all the good thats been happening to me lately, I guess sooner or later you gotta experience a little bad in order to know how blessed you are to get the good!
@Caligula Now that you mention it we did discuss that particular issue and I think as of last night I may have come up with a nice design that will not have the ability to roll. I just got to put the finishing touches on it and will post pics soon for you bro. You must forgive me for forgetting that point you made, you know better than most that I have my hands beyond full at this moment. It may take me a time or two but ill get right eventually!
@Disney Thanks for stopping by and showing interest in my work! At this time there are no discounts available, I am afraid that if I was to sweeten the deal a bit now that the demand may be more than I can handle now. I have so much to do with retail, wholesale, custom work, and behind the scenes projects that it wouldnt take much for me to get buried and not be able to deliver the quality and service that people have come to expect from me. I hope that you will give my work another look and if I can help in any way pls let me know.
@radiantchipmunk Wow bro, what can I say, I appreciate your post of kind words and feedback! I know we had a problem at the beginning and all I wanted to do was get ya right in the end, if you are happy now and all is good then I have done right and thats what its all about! Thanks for your cooperation and for stopping by.
Made some great connections today, spoke to a good friend after a long time absence, she has started her own company as well as becoming a very important part of SKUNK Magazine. She has really made her way in the MJ industry and was excited to hear how far I had come since way back when she was able to open the door for me to Magic Flight and helped me get my start in the vaporization world. We spoke about our futures and what role we could play in each others. It was really good to hear from someone that has been there and knows what it takes to start from nothing and to have seen good times and bad, but have come away with many blessings and better opportunities in the long run.
Also spoke to guy in Boston that had a chance to use one of my cocobolo solo stems with a friend in florida, he was really impressed by it and kept it in mind. He is about to start a new website that will feature indiduals from all over the US that are making their way in the booming biz that is MJ and wanted to get with me and discuss what part I could play in his new venture!
Am so excited to see what the future holds, I have had this good feeling for a while now, better brighter days are ahead!
@Caligula Now that you mention it we did discuss that particular issue and I think as of last night I may have come up with a nice design that will not have the ability to roll. I just got to put the finishing touches on it and will post pics soon for you bro. You must forgive me for forgetting that point you made, you know better than most that I have my hands beyond full at this moment. It may take me a time or two but ill get right eventually!
@Disney Thanks for stopping by and showing interest in my work! At this time there are no discounts available, I am afraid that if I was to sweeten the deal a bit now that the demand may be more than I can handle now. I have so much to do with retail, wholesale, custom work, and behind the scenes projects that it wouldnt take much for me to get buried and not be able to deliver the quality and service that people have come to expect from me. I hope that you will give my work another look and if I can help in any way pls let me know.
@radiantchipmunk Wow bro, what can I say, I appreciate your post of kind words and feedback! I know we had a problem at the beginning and all I wanted to do was get ya right in the end, if you are happy now and all is good then I have done right and thats what its all about! Thanks for your cooperation and for stopping by.
Made some great connections today, spoke to a good friend after a long time absence, she has started her own company as well as becoming a very important part of SKUNK Magazine. She has really made her way in the MJ industry and was excited to hear how far I had come since way back when she was able to open the door for me to Magic Flight and helped me get my start in the vaporization world. We spoke about our futures and what role we could play in each others. It was really good to hear from someone that has been there and knows what it takes to start from nothing and to have seen good times and bad, but have come away with many blessings and better opportunities in the long run.
Also spoke to guy in Boston that had a chance to use one of my cocobolo solo stems with a friend in florida, he was really impressed by it and kept it in mind. He is about to start a new website that will feature indiduals from all over the US that are making their way in the booming biz that is MJ and wanted to get with me and discuss what part I could play in his new venture!
Am so excited to see what the future holds, I have had this good feeling for a while now, better brighter days are ahead!
Reflections
Well-Known Member
So sorry about the dog and truck Ed..but at least you got some good with the bad.
FlyingLow
Team NO SLEEP!
Ed, I just threw a custom Nano order in and I got some wood coming your way
I will shoot you a note tomorrow night to discuss a few ideas, I am so excited for my next stem from you!
(Please don't let me forget to get a smearing, or can, of your ass butter!)
EDIT~ Eek Ed! Just read your above posts and so sorry to hear about your truck and the dog. Really takes the wind outta my sails.
I will shoot you a note tomorrow night to discuss a few ideas, I am so excited for my next stem from you!
(Please don't let me forget to get a smearing, or can, of your ass butter!)
EDIT~ Eek Ed! Just read your above posts and so sorry to hear about your truck and the dog. Really takes the wind outta my sails.
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Boy, it sure does sound like something nasty when you take the bomb out of it...Ed, I just threw a custom Nano order in and I got some wood coming your way
I will shoot you a note tomorrow night to discuss a few ideas, I am so excited for my next stem from you!
(Please don't let me forget to get a smearing, or can, of your ass butter!)
EDIT~ Eek Ed! Just read your above posts and so sorry to hear about your truck and the dog. Really takes the wind outta my sails.
Hello and good morning everyone, been a bit busier than normal round here lately with having no transportation, trying to work with the wifes schedule and all. As usual have been giving it hell in the shop working wood, trying my damnest to keep up with retail sales, wholesale orders, custom orders and new ventures and the like. I am really trying to keep it all together and not flip out at the amount of work I have gotten myself into, alas I have nobody to blame for the hole I have dug myself into. One day at a time, one job at a time! I dont know if you all are familiar with the saying, "Ain't no hill for a stepper" and thats what I am, a stepper! I am gonna make it happen come hell or high water! I have already talked with my main man that has been helping me in the shop turning pieces for big wholesale orders and the like, he knows a guy that is in need of some extra work, so I am gonna start having him come by and get familiar with the shop and what all I do, gonna give him a try on the lathe and see how well he is able to handle a chisel. Ed's TnT is growing so fast that I am gonna have to hire some solid help, help that I can depend on and are able to learn what is needed and what I expect of them. In the beginning the guy that is my main man now, I hurt his feelings a few times, he started off slow of course learning his technique for turning, he would spend quite a bit of time on one piece and then have me tell him thats close but in the end its crap and off to the trash it went. I demand the best quality in any piece, its gotta be damn good or its not worth the time you put into it. Each piece has to be exact and precise, each has to be smooth and sleek, no bumps or nicks, no marks or dings. My customers have come to depend on the quality and consistency of products they buy from me and that is what I demand of anyone that works for me, top notch quality with the utmost consistency, no if ands or buts about it. If there is a question about what you think I will think of it, then there should be no question for me at all, if its not perfect then dont even think for a second to ask me, throw it in the trash and start over.
There is gonna be alot going on here at Ed's TnT in the next coming months, there is gonna be some growing pains and adjustment that will have to be overcome, thats just part of the process and how growth works. Pls do hang in there with me and keep an eye out for all the great things to come!
@Disney Just holla when you are ready!
@Reflections You are right, and the good far outweighs the bad, some have it tougher than I! I am very lucky to have all that I do and am blessed beyond my dreams, a little bad here and there puts all the good into perspective.
@vakedcow You are right as well, if it wasnt for Mrs. Ed and all the help she gives here at Ed's TnT I would be in a pretty bad way, she is my #1 blessing! She does what ever I ask with no bitching or whining, she is my rock! She looks out for me and the biz and sacrifices just as much or if not more than I at times. She is a very important part of the biz and an asset to me in more ways than I could ever imagine!
@FlyingLow Got your blank yesterday and have sent ya a PM to discuss it, holla back and we will go from there. Thanks for the opportunity to do more work for ya bro, its a real honor!
@SSVUN~YAH LOL, hadnt thought about that!
So after taking a little time and talking to @Caligula I put this little thing together, its turned from golden Amboyna burl and has the medical grade type 2 titanium blades, and it will not roll over, stays put and was a big factor for caligula! Pls let me know what you think!
There is gonna be alot going on here at Ed's TnT in the next coming months, there is gonna be some growing pains and adjustment that will have to be overcome, thats just part of the process and how growth works. Pls do hang in there with me and keep an eye out for all the great things to come!
@Disney Just holla when you are ready!
@Reflections You are right, and the good far outweighs the bad, some have it tougher than I! I am very lucky to have all that I do and am blessed beyond my dreams, a little bad here and there puts all the good into perspective.
@vakedcow You are right as well, if it wasnt for Mrs. Ed and all the help she gives here at Ed's TnT I would be in a pretty bad way, she is my #1 blessing! She does what ever I ask with no bitching or whining, she is my rock! She looks out for me and the biz and sacrifices just as much or if not more than I at times. She is a very important part of the biz and an asset to me in more ways than I could ever imagine!
@FlyingLow Got your blank yesterday and have sent ya a PM to discuss it, holla back and we will go from there. Thanks for the opportunity to do more work for ya bro, its a real honor!
@SSVUN~YAH LOL, hadnt thought about that!
So after taking a little time and talking to @Caligula I put this little thing together, its turned from golden Amboyna burl and has the medical grade type 2 titanium blades, and it will not roll over, stays put and was a big factor for caligula! Pls let me know what you think!
Philreal187
Well-Known Member
Here is Ed's custom pinnacle wood insert for the updated gpong that vapor blunt has put out. As some know the heater on the pnp is about an inch from your lips and can get really hot. I wanted to have something longer to help cool the vapor so I contacted Ed and as always he pulls through with exactly what I needed.
This is the glass insert that I wanted to have extended
As an added bonus for all the viewers here is my stem which Ed made for the Hammer.
Thank you @Ed's TnT for your custom work I really appreciate you doing work for me even while you have large orders, a birthday and everything else life loves to toss in our paths. Its not too often you find a master of a craft doing work for the people and especially one with great hospitality.
This is the glass insert that I wanted to have extended
As an added bonus for all the viewers here is my stem which Ed made for the Hammer.
Thank you @Ed's TnT for your custom work I really appreciate you doing work for me even while you have large orders, a birthday and everything else life loves to toss in our paths. Its not too often you find a master of a craft doing work for the people and especially one with great hospitality.
Vicki
Herbal Alchemist
Here is Ed's custom pinnacle wood insert for the updated gpong that vapor blunt has put out. As some know the heater on the pnp is about an inch from your lips and can get really hot. I wanted to have something longer to help cool the vapor so I contacted Ed and as always he pulls through with exactly what I needed.
This is the glass insert that I wanted to have extended
As an added bonus for all the viewers here is my stem which Ed made for the Hammer.
Thank you @Ed's TnT for your custom work I really appreciate you doing work for me even while you have large orders, a birthday and everything else life loves to toss in our paths. Its not too often you find a master of a craft doing work for the people and especially one with great hospitality.
Those are beautiful! Ed does such awesome work!
momofthegoons
vapor accessory addict
So after taking a little time and talking to @@Caligula I put this little thing together, its turned from golden Amboyna burl and has the medical grade type 2 titanium blades, and it will not roll over, stays put and was a big factor for caligula! Pls let me know what you think!
Other than I want one? Let me know when they're available Ed. My accessory addiction just kicked into high gear.
Hello and good morning, I hope everyone's week is off to a good start! My truck should be finished today or tomorrow and my new bad ass metal lathe is being delivered today!
Oh yeah, cant wait to get this bad boy up and running! Am super excited to see it perform! It has been backordered for a couple months now and I got a postcard in the mail just last week with a delivery due date that said, "Indeterminable delivery date" say what???? Have been told it would be the end of the month twice already and then had the postcard that said they had no idea, then out of the blue the frieght company calls yesterday saying we have a delivery for you tomorrow which is today, hmmmm how bout them apples! What a surprise, what a surprise!
@FlyingLow Glad you like the tool, it was fun to make and yes it wont roll over! Major factor there, thanks to @Caligula! Oh got your stem blank in and wow its gonna be a stunner when done, its full of eyes! Cant wait to work it up! Its good to hear you are taking that Hammer stem out on field trips and the like, flying under the radar and nobodies the wiser!
@Vitolo Thanks for stopping by my man and checking the dab tool, I am also glad you dig it!
@Philreal187 Good morning and thanks for the post with all the pics, I do so like pics! I am glad I was able to do some more work for you and happy all your pieces are getting work by you. Its always fun to do something different and the piece for the pinnacle was just as exciting.
@Vicki Thanks for the kind words, you know I appreciate them! Hope you are doing well and know you have alot to overcome but know you are tough and will give it hell! Keep on keeping on!
@momofthegoons Hey there, thanks for stopping by! I hate I helped push the gas peddle! Maybe a little while before those make it to market, have a ton of other stuff pressing at the moment, may have to do ya something on the fly. Hmmm maybe I can slap a piece together and get it in with the package I got headed your way real soon!
Oh yeah, cant wait to get this bad boy up and running! Am super excited to see it perform! It has been backordered for a couple months now and I got a postcard in the mail just last week with a delivery due date that said, "Indeterminable delivery date" say what???? Have been told it would be the end of the month twice already and then had the postcard that said they had no idea, then out of the blue the frieght company calls yesterday saying we have a delivery for you tomorrow which is today, hmmmm how bout them apples! What a surprise, what a surprise!
@FlyingLow Glad you like the tool, it was fun to make and yes it wont roll over! Major factor there, thanks to @Caligula! Oh got your stem blank in and wow its gonna be a stunner when done, its full of eyes! Cant wait to work it up! Its good to hear you are taking that Hammer stem out on field trips and the like, flying under the radar and nobodies the wiser!
@Vitolo Thanks for stopping by my man and checking the dab tool, I am also glad you dig it!
@Philreal187 Good morning and thanks for the post with all the pics, I do so like pics! I am glad I was able to do some more work for you and happy all your pieces are getting work by you. Its always fun to do something different and the piece for the pinnacle was just as exciting.
@Vicki Thanks for the kind words, you know I appreciate them! Hope you are doing well and know you have alot to overcome but know you are tough and will give it hell! Keep on keeping on!
@momofthegoons Hey there, thanks for stopping by! I hate I helped push the gas peddle! Maybe a little while before those make it to market, have a ton of other stuff pressing at the moment, may have to do ya something on the fly. Hmmm maybe I can slap a piece together and get it in with the package I got headed your way real soon!
@FlyingLow Its a trip my man, I have many many vapes now, started off with a MZ and they kinda snowballed from there. I have several different log vapes, quite a few portables, but my current desktop fav is the EQ. Its fairly easy to use, not a whole lot of prep time involved, its a heavy hitter for sure and is just a delight to use. For portable if need be I will go with the Solo its a workhorse as well and does the trick. I must admit though there are times that call for my trusty good ole wood dugout that I have had for almost 20 years, its quick and easy, great for when I need it in a pinch. I am still a creature of habit and am not one to fix something where its not broken. I dont take quick to change and even rebel against it sometimes. I tend to keep shit on the low low, not bring attention to myself nor open my mouth and invite it. I work what works for me!
On another note, I just booked my flight to Denver in October, going to attend a big B2B trade show in my industry and am so looking forward to my time there. Gotta say I have never been to CO. and think now will be a great time to experience the freedoms that so many enjoy out there! So watch out, they are gonna have a Mississippi country bumpkin soaking it up and living the life for a couple days!
On another note, I just booked my flight to Denver in October, going to attend a big B2B trade show in my industry and am so looking forward to my time there. Gotta say I have never been to CO. and think now will be a great time to experience the freedoms that so many enjoy out there! So watch out, they are gonna have a Mississippi country bumpkin soaking it up and living the life for a couple days!
@NeeChee Hello and thank you for your interest in this piece, as a matter of fact I have added them to my site and can be found here -
http://www.edstnt.com/index_files/woodarizersolovaporstems.htm
http://www.edstnt.com/index_files/woodarizersolovaporstems.htm
Thing is I am all sold out of the ones pictured there. These have been going through some modification and tweeks but havent really had time to make more of them to keep up with the changes. I do have a couple or so made that are similar to that pictured just maybe in a different species wood and with the new upgrades like the type 2 medical grade titanium blade. If you are interested in picking one up let me know and I will show you what I have available. http://www.edstnt.com/index_files/woodarizersolovaporstems.htm
http://www.edstnt.com/index_files/woodarizersolovaporstems.htm
http://www.edstnt.com/index_files/woodarizersolovaporstems.htm
Thing is I am all sold out of the ones pictured there. These have been going through some modification and tweeks but havent really had time to make more of them to keep up with the changes. I do have a couple or so made that are similar to that pictured just maybe in a different species wood and with the new upgrades like the type 2 medical grade titanium blade. If you are interested in picking one up let me know and I will show you what I have available. http://www.edstnt.com/index_files/woodarizersolovaporstems.htm
FlyingLow
Team NO SLEEP!
Site looks great Ed!
I am curious, what size C-clips are those? Do you sell any spares?
I accidentally bent mine well outta shape the other day, then bent it back and got it reinstalled; but I would not mind buying a pack of spares off you when I pay for my next order
... I am also looking forward to getting your [bomb] ass butter on my stem!
I just could not resist
I am curious, what size C-clips are those? Do you sell any spares?
I accidentally bent mine well outta shape the other day, then bent it back and got it reinstalled; but I would not mind buying a pack of spares off you when I pay for my next order
... I am also looking forward to getting your [bomb] ass butter on my stem!
I just could not resist