E-Nano from Epickai

[Stoneager]

We will be offering a new dimmer accessory that comes in a wood box (cherry, maple or walnut) for E-Nano. It has weights in it to help keep it in place on your desk. They will be offered separately as an accessory or as an upgrade when you buy a kit. Hopefully have them up on the site by end of the week. (looking at you Nadia)

Pro Tip: you can use double sided tape, or velcro and attach it to your stand for even more stability.

YES! YES! YES!
(looking at you Nadia)

 

[invertedisdead]

I like that. I can see such a dimmer mounted in a stand in the future.

now the gears are turning! YES!

That would make for a fantastic, minimalist vape station.

 

[ACE OF VAPE]

Would a few small magnets be acceptable?

I was considering putting magnets in the new stands and dimmer boxes. The tape idea would be for people who already have a stand.

 

[ubardog]

I like that. I can see such a dimmer mounted in a stand in the future.

I strongly agree !!!

Stand with dimmer built in.
or
You could even Cut a square out of stand and make that square into the Dimmer. Then router a cable way in the back of the stand. Then you have a matching stand and dimmer built in that is removable too.

 

[Baron23]

We will be offering a new dimmer accessory that comes in a wood box (cherry, maple or walnut) for E-Nano. It has weights in it to help keep it in place on your desk. They will be offered separately as an accessory or as an upgrade when you buy a kit. Hopefully have them up on the site by end of the week. (looking at you Nadia)

Pro Tip: you can use double sided tape, or velcro and attach it to your stand for even more stability.

Outstanding....I had to look high and low for a weighted cable management thingy and then tactical rubber band it all together.

This is a welcomed development, indeed. When will it be GA and on the site?

 

[pxl_jockey]

My rebuilt Nano has started acting funny and quits heating & light cuts out when inverted for j-hook or glass, so I’m using dry stems only for the foreseeable future. I carefully took the bottom off carefully to check the connections and all seems fine... guess I’ll reach out to Andy but I hate to be Nano-less even though I’m fortunate to have other options. I just love knowing that it’s on and at the ready for attitude adjustments!

 

[ACE OF VAPE]

We've been testing these at demo events Lately,
Uses a standard cord to go from dimmer to E-Nano. Hard wired from wall to the stand.
Working on a smaller version for next week?

 

[BabyFacedFinster]

If I had any woodworking skills I would love to connect that dimmer accessory to my stand with a dovetail joint.

Love the knob too.

 

[DogBoy]

We've been testing these at demo events Lately,
Uses a standard cord to go from dimmer to E-Nano. Hard wired from wall to the stand.
Working on a smaller version for next week?

...something like that but a good bit smaller, methinks...

 

[GalvoAg]

I think I’m about to pull the trigger on a e-nano and just wanted to see any opinions about the ice stem. It looks like it’s new so their isn’t much on it. Was just wondering if that was the best stem to let it rip.

 

[StringTheorista]

The ice stem is wonderful! Cools the vapor significantly, and retains full flavor, as opposed to cooling through water. Highly recommend, in fact I have DIYed “ice stems” for my other vaporizers because it’s that good

 

[GalvoAg]

Sweet, about to snag that with a maple burl. This will be my first log. Anything I need to know or anything else I need for the e-nano?

 

[unsorted]

Sweet, about to snag that with a maple burl. This will be my first log. Anything I need to know or anything else I need for the e-nano?

It's great to have a gong and a bong....

 

[GalvoAg]

It's great to have a gong and a bong....

Awesome if I currently don’t own any glass would it be smarter to go with the 14mm? Looking around I see more options in that size. I plan on getting one I just don’t know where to start.

 

[Hjalmark]

Awesome if I currently don’t own any glass would it be smarter to go with the 14mm? Looking around I see more options in that size. I plan on getting one I just don’t know where to start.

I use the 14mm mainly but own both so I don't need to worry about only buying 14mm ones and even own also a 18 to 14mm glass joint that I got with some piece but never use it either moral of this story is that I broken all my 18mm bongs.... So yeah
But never broken a gong! Don't have marble floor though but it's survived some drops into sinks and wooden floor or vinyl bathroom floor

 

[BestBuds]

Anything I need to know or anything else I need for the e-nano?

One of my favorite ways to use the enano is to get my biggest j hook 18mm and use the gong with that. It's given me the best balance between coolness of the vapor and flavor. I think everyone should have a nice j-hook.

 

[Hackerman]

The E-Nano can be used many ways.

 

[hoptimum]

One of my favorite ways to use the enano is to get my biggest j hook 18mm and use the gong with that. It's given me the best balance between coolness of the vapor and flavor. I think everyone should have a nice j-hook.

Agree about the J-hook. I've been running off an ash catcher.

 

[ACE OF VAPE]

The E-Nano can be used many ways.

Love love the leather cuff.

 

[GalvoAg]

Well caved in and got a e-nano with the ice steam and a gong. Don’t think I’ve ever been this excited to hit a vape but I’m happy to be in the log crew finally.

 

[BabyFacedFinster]

Well caved in and got a e-nano with the ice steam and a gong. Don’t think I’ve ever been this excited to hit a vape but I’m happy to be in the log crew finally.

It's an investment and will last you a long time. So many vapes have come and gone for me. (So so many ) But the nano has stood the test of time for usefulness and my personal VAS.

Congrats on the burl wood. They are lovely, and I believe resist cracking moreso than straight grained wood.

Next time you pick up some accessories, I would recommend a 5 pack of basket screens. If you clean them carefully they can last forever, but eventually they lose their round. They can be reshaped but eventually I will just retire them for another.

Non-essential but handy parts would also be a spare cord and a stand. With the recent news, someone could kill two birds with one stone and get both in one set-up but still in the design phase. Having a stand is just convenient and helpful in securing it from falls. Having a spare cord will help in a diagnostic test if you e-nano ever stops working. The second cord would tell you if the nano itself is defective vs the cord.

I find the ice stem to work too well. It is a very cool hit for a dry hit, but you get most of the extraction in the first hit. So effective that those first hits just slam me. I prefer to take it a bit slower with a 14mm gong and my bubbler.

Finally, the code FCLOVE has provided free shipping in the past. I can't remember if it still does. Welcome to the group!

 

[Allen_Starkwell]

We've been testing these at demo events Lately,
Uses a standard cord to go from dimmer to E-Nano. Hard wired from wall to the stand.
Working on a smaller version for next week?

Any news on the 220V cord?

 

[SloJimFizz]

Welcome @GalvoAg Maple Burl buddies!

Nice new stand with the Dimmer built in.
What has been missing for me @nadia_epic and @ACE OF VAPE is swag. The Epic trucker hat was available when I got my Nano a couple years ago, but not really my style with just the word Epic on it. I've kept an eye out, but nothing else has surfaced that I've seen.
You have a pretty sweet logo, start pimping the hell out of it with shirts and hats. I have Dynavap and Volcano shirts, need to add a Nano related shirt or hat.

 

[Baron23]

We've been testing these at demo events Lately,
Uses a standard cord to go from dimmer to E-Nano. Hard wired from wall to the stand.
Working on a smaller version for next week?

I liked the small knob mounting only wood stand and I like this.

I do think you are on the right track to solve a long standing annoyance....the stiff cord pulling the rheostat and nano around.

Way cool....look forward to seeing final product. I like this but agree...smaller would be a bit better.

 

[ACE OF VAPE]

Welcome @GalvoAg Maple Burl buddies!

Nice new stand with the Dimmer built in.
What has been missing for me @nadia_epic and @ACE OF VAPE is swag. The Epic trucker hat was available when I got my Nano a couple years ago, but not really my style with just the word Epic on it. I've kept an eye out, but nothing else has surfaced that I've seen.
You have a pretty sweet logo, start pimping the hell out of it with shirts and hats. I have Dynavap and Volcano shirts, need to add a Nano related shirt or hat.

tweaked the logo a bit. Hope you like it. Gonna make swag soon. Promise.