Bravesst

Full Steam Ahead
Manufacturer
I also like a vaporizer that's easy to use and doesn't have a lot of parts or one that is difficult to clean. That is one of the reasons among others is why I love the E-nano. I love the idea that someone has taken the time to use their own hands to make this wonderful piece of vaporizing ingenuity. Andy does put wonderful craftsmanship and care into every unit that he makes.

The nano gives your herb that wonderful vapor taste along with the glass extended mouthpieces. Also I have dropped my stems several times and not a chip or a crack. The stems are made with thick glass that puts up with a lot of wear and tear. They are easily cleaned, I put mine in a container with ISO for a couple days and they are cleaned and ready to go. I just rinse with some warm water afterwards.

Today I have some Tahoe OG in my Nano and enjoying some of our early summer weather. I have the Nano plugged in on the back porch, thank goodness for the long durable cord. I have it set on a hair above temp 6, it seems like the perfect dry temp for me. For me taste is the qualifying factor that helps me decide the good vaporizers from the less regarded ones. The nano is excellent in the flavor department doesn't burn my herb but heats in a manor that produces great flavor along with the large clouds that everyone likes.

I can use a little herb for a quick on the go lung busting hit ( I seldom do that ). I know others like to do it. I like using about .15 grams into the stem and take my time. I give my herb a stir about half way into my session. I let my vapor taste tell me when my session is over. IMO every vaporist needs a log vape. The log vape for me is a custom nano from Epicvape.

I agree with others, if not for FC I don't know if I could have stuck with vaporizing in the beginning. I had members walking me through the process holding my hand along the way. I felt like they were at my side guiding me along my path. This was a life changing experience for me. I have my health, less pain and anxiety because of the help from others. I am very emotional about this, a big FC hug to all of you out there.

you're making me want want of these really bad. I'm in dire need of a reliable, always there vape. I love my Mighty, from taste to affect, but I've had 2 issues in less than a month, and hate returning it (latest is LED). I like the simplicity and 'less parts' aspect, always knowing, I can improve, adjust, might be lots of fun. Thanks Again!!!
 

DieHard

Accessory supplier
Accessory Maker
you're making me want want of these really bad. I'm in dire need of a reliable, always there vape. I love my Mighty, from taste to affect, but I've had 2 issues in less than a month, and hate returning it (latest is LED). I like the simplicity and 'less parts' aspect, always knowing, I can improve, adjust, might be lots of fun. Thanks Again!!!
Great vape. No plastic. Works right out of the box. Then once you really get to know how to coax the best tasting vapor out of your flowers....:love:. What's not to love about an E-Nano?
 

flotntoke

thoroughly vaped
you're making me want want of these really bad. I'm in dire need of a reliable, always there vape. I love my Mighty, from taste to affect, but I've had 2 issues in less than a month, and hate returning it (latest is LED). I like the simplicity and 'less parts' aspect, always knowing, I can improve, adjust, might be lots of fun. Thanks Again!!!

Reliable? Check! Always there ready to vape? Check! Taste? Double-check!! Simplicity? Check! Less parts? Check! Adjust (and tweak)? Nearly endless between temp dial and adjustable screens. Check! Also throw in how well they work with very little material, the ability to vape concentrates and hash, how good looking they are (even nicer with custom wood from @Snappo !), that they double nicely as an aromatherapy device, and really shine on a water piece!

What's holding you back @Bravesst ? The sooner you order, the sooner you'll have it! FCLOVE gives 10% off and lifetime warranty.

In all fairness, I should mention that I did have an issue with my nano that required sending it in. My dial went crappy on me after owning it for about 14 - 15 months. That was about a year ago. Should also mention that my V1 has a cord that is not detachable, and I do have a bad habit of wrapping the whole thing up quickly and taking it with me to where ever - which probably isn't the best thing for it. And, for a vape that is on most of the time (lately with an aroma therapy cup on it at least 10 or so hours a week) and goes through at least 2 sessions pretty much everyday for more than 2 years - I've certainly got no complaints on reliability.

Also, nano cords are detachable for some time now (year? year and a half?). Though pretty rare, most issues seem to occur somewhere with the cord/dial. I've suggested a few times that if you have issues that may be related to the cord/dial to get a new one ($20 and usually to most of US in less than a week). Pretty sure you'll be refunded for it if the old cord was the problem. Am sure Andy/Epicvape would rather warranty a cord than have you send your nano back for testing only to determine an easily replaceable cord was the problem.
 

Eschient

Giga-Dweebess
Also, nano cords are detachable for some time now (year? year and a half?). Though pretty rare, most issues seem to occur somewhere with the cord/dial. I've suggested a few times that if you have issues that may be related to the cord/dial to get a new one ($20 and usually to most of US in less than a week). Pretty sure you'll be refunded for it if the old cord was the problem. Am sure Andy/Epicvape would rather warranty a cord than have you send your nano back for testing only to determine an easily replaceable cord was the problem.

To add to this, it's a good idea to grab an additional cord when you order your first anyway, that way you can leave the cord in different rooms and just move the Enano itself room to room. Well, useful if your outlets aren't easy to get to.
 

Delta3DStudios

Well-Known Member
Accessory Maker
Should I be turning my E-Nano down when not in use but leaving it on? Or is leaving the unit at 7-8 for extended periods OK? I know many people leave their's on 24/7 but I don't know what temp they're running.

Anything below 8 and you should be fine 24/7. If you have your vape above 8, you might want to consider turning it down when you leave the house.

I've left mine running at 6.75 for weeks at a time without any issue
 

flotntoke

thoroughly vaped
I do this with my Nano and Lotus. Reclaim starting to affect vapor quality? Hit it dry until it's good as new and you're good as fucked.

Best way for a quick clean IMO, but usually notice a bigger difference on next hits if still clean with ISO after. I never throw a screen in ISO until I do this and get all the goodies out. Needless to say, if you're making ISO reclaim oil with your screens, get them as dirty as you can and don't do this!

For a good super quick clean, do the vaping screen clean, pull screen and give it a quick scrub on face and around top edge with a toothbrush that has a little ISO on it. Rinse, dry (blow it off well), put back in GonG/stem and give it a few pulls with heat but no load to fully dry. You're ready to go in like 2 minutes.

IME clean screens make a big difference for flavor and vapor production. It's a very small concentrated area in there and the more airflow you have the better.
 

Melting Pot

Sick & Twisted
The best means of "test driving" different Vapes for me has been to meet up with other FC members and bring a few of my own for a "vaporware" party.

I have to agree...
Cleaning my collection for trip to the mayo clinic.
Bonus having FC "VAPEFEST"
(Vaporware) lol
Gonna be cool meeting FC members & testing new vapes.
So far me ,@mvapes @stickstones @subway13029 @His_Highness
Should be awesome to say the least...

Get back on topic I love my E-nano. Hasn't been turned off or left my bedside in 4 months.
I leave her set at 6.2 I use her dry. I'm more of a flavor chaser.

Everyone in Nano nation have an Awesome day & vape on.
 
Top Bottom