Dynacrafts Hand Made Wooden Stems For Dynavap

Ramahs

Fucking Combustion (mostly) Since February 2017
Products there should be plenty of Tegs and Jamises left. I can see them I hope it is not legal trouble again... I will look into this.

Thanks. I see them now. My fault.
The bookmark I was using to get to your store takes me to this page:
Screen Shot 2020-06-08 at 9.41.04 PM.png

^ That made me think the store was solld out. My bad :shrug:
 
Last edited:

Rabid Kiwi

Accessory Maker
@Ramahs No worries, yeah that was my etsy page. I got the boot from them so I made my own shop front. I am in the process of trying to make it more mobile friendly. But I am fighting to stay awake right now so I may have to work on it more tomorrow after work.
 
Rabid Kiwi,

Ramahs

Fucking Combustion (mostly) Since February 2017
@Ramahs No worries, yeah that was my etsy page. I got the boot from them so I made my own shop front. I am in the process of trying to make it more mobile friendly. But I am fighting to stay awake right now so I may have to work on it more tomorrow after work.

Oh. Silly me. I didn't realize you no longer had an Etsy page. lol

Bookmarked!
 

Rabid Kiwi

Accessory Maker
Thanks @Rabid Kiwi I've ordered a couple of you're stems at the drop! I'll be looking forward to them arriving here in Australia!
Nioce, sorry about the shipping taking so long. I am talking with my man at the post office about getting my packages for over seas to not route through Chicago for a while. Until then there are going to be longer delays for International.

I received my Shaddam stem on Friday and have been using it for the last few days. The wood is beautiful and it hit's like a train. I'm very happy I pulled the trigger.

I am over joyed that you are happy with what you got. It just puts a smile on my face to know that people are enjoying these stems as much as I do.

IMG_3693JPG.jpg

I had about five inches of wood... I think this is how some porn's start.... Any ways I wanted to see if I could make a five inch Duke. Well I did, so this guy is going to the market on the 22nd. It is just, well it is going to take a lot of self control for me to put it in the store but that is were it is going.

I had a great day today, and I am working hard on getting the finish done on the launch for the 22nd. Have more pic's tomorrow, as always...

Good Puffen! 07
 

Rabid Kiwi

Accessory Maker
rsz_1img_3703.jpg

Sit back and relax. Tomorrow I will complete production on the Duke and Lady lines in the shop. I am chomping at the bit to get back in the shop. My soul longs for the quiet of the mind, the sureness of movement, and the tranquility of creativeness. I hear it calling to me and the binds of my life are not as tight as Odysseus's, so I may break free and sate my thirst for the future. As always...

Good Puffen! 07
 

Rabid Kiwi

Accessory Maker
Oh so I got inspected today by the Big Boss herself. It was close but The Lord of the Known Universe Her Highness Desdemona The Demonic Duck. She keeps a close eye on all things in this universe, and she is training her minions to do the same.
IMG_3710JPG.jpg

So I lived trough yet another encounter with the wings of death, The Lord of the Known Universe Her Highness Desdemona The Demonic Duck. I also got a lot done today, so now for the update and pics.
IMG_3707JPG.jpg

These are most of what is going to be released on the 22nd. You have some Lady Jessica, some Duke Leto, some Jamis, and well that will come a bit farther down on the post here.

IMG_3708JPG.jpg

These are what I made today the last three Dukes, and four Lady's. and five....

IMG_3713JPG.jpg

The Dirty Bene Tleilax are here. Made from Red Elm, Goncalo Alves, and that is one Blood Wood at the end there. I must say that the Red Elm is going to look devine. I have some other pic's for later this week. Well lets show you one.
IMG_3715JPG.jpg

Now that is unfinshed and really rough it has a lot of work yet to do on it. But it is going to be just divine.

So these Bene Tleilax are going to bring the Mother of Pearl ghola effect. ( MoP ) This will mean that every line is going to have a few MoP's in it. Then on the next launch more Bene Tleilax will show up to bring a new ghola style in. This go on until all the ghola effects are in production. Then any time a new ghola effect is found the Bene Tleilax will pop back up to introduce it. So the 22nd is going to have four, you heard that right, four lines restocking/launching. We have the Jamis, Duke, Lady, and Tleilaxu. That is right we here at Dynacrafts.com, well it is just me and other Jonathan and TBH I think that guy is on drugs, pride our self in quality and quantity. Jonathan handles the quantity and other Jonthan handles the quality, I just hope that we can keep being handy to each other...... Well that came out wrong.... Phrasing.....

I am sorry just trying to have fun with it and blow off some stress. Because we are entering a perilous area in our lives, one could say we are on a path to it. This path is more of a well traveled road, a highway if you will. Now we are on this highway that leads us to this trepidatious cloud of unknown. One could argue that it is a zone, and in this zone there is a higher than usual risk. I find it quite plausible to call it a zone of danger....... Yeah I need to get a life. I just wrote a paragraph just to do a bad joke from a old tv show. Danger Zone...... As always..

Good Puffen! 07
 

Rabid Kiwi

Accessory Maker
rsz_img_3727.jpg

Here you see one of the red elms, it still has quite a bit more finish work but that is all curing and final details. The MoP is there to bad you do not see the light refraction from the Red Elm. So I will show the others as they are viewable. But they still are far from done. I just wanted you all to have a nice look at it so I took a few pics.

I am really tired today, so sorry there is not much more than that. I hope this finds all of you all well. As always...

Good Puffen! 07
 

Rabid Kiwi

Accessory Maker
rsz_img_3739.jpg

Sorry about the delay in the update there was an issue that popped up. So this is going to be the update for both days. I love doing these daily updates but I have over extended myself here a bit. So my data shows that Saturday and Sunday are the two days with the lest amount of responses. So I am not going to do daily updates on Saturday any more. I will IG a pic on Saturday, but no blog update. I will keep Sunday because it is a pre shop update, the others are just kind of daily hype builders for the lines. Speaking of lines....

This is one of the Ghola's from the Duke Leto line it is just another preview of the MoP Ghola. So tomorrow I am back in the shop. If the new wood is here I will start on those lines, If not then I will work on the next Ghola line and the Stilgar line. I have about 20 boxes to go through from the shipments for Dynacrafts and a few other projects, and I lost track of what came in and what did not. I am sorry I do not have a narrower ideal of the game plan. We will just have to wait and see. I hope this finds you well and as always...

Good Puffen! 07
 

Rabid Kiwi

Accessory Maker
IMG_3750JPG.jpg

The Futars are comming!!!!!!!!

The Futars are going to be two different woods on the same line. Seen here is the Red Black Palm ones, and as soon as the wood gets here the other is just Black Palm. So they should be launching on the first week in July. The Stilgar line is just put on hold indefinitely because of shipping shortages. The Ghola stuff should all get here next week some time so I hope that is on track. I found some extra wood today after searching all over the place so I hope I have buffeted the supply to handle the shipment problems. Most of the places I order from now has found out what I did a while ago, USPS is the only ones right now shipping on time. So the newer orders are coming in before the older ones lolz.

IMG_3752JPG.jpg

Here you can see the Red Black Palm up close. It is just an amazing looking grain and texture. I really lucked out finding what I did. The supply for this run is limited. Not like never get again, but like IDK how long it will take to get more but I can get more. So I have about 2-5 more to make depending on how many survive the turning. This stuff is Wedge lvl hard to work with. I cut enough for 12 to be made today. I only got 7 out of those 12. The rest just shattered or cracked. The same thing that makes the grain look so outstanding is the same thing that makes it really hard to work with. But again it is so worth it.

I hope to have the Black palm in by Thursday.
rsz_img_3733.jpg

The Duke and Lady lines are now all curing and getting ready for you all along with the last of the Jamis. I will start leaking pic's for the launch on the 22nd through IG and here in the updates.

Now I have been debating on sharing this or not so I will just tell you what I know. Work picked up and I had to pick up the slack, and I also kept up Dynacrafts and expanded production at the same time. Well I was burning the candle at both ends long after I ran out of wick. It has now all caught up to me and I am having some minor health issues. Nothing to worry about nothing big, but I have over extended my self here. So if I miss an update or a blog or an IG do not fret or worry. It is just I did not have time, or I needed to get some rest. Again I can not stress how minor this is, but it will effect Dynacrafts. So I told you all because you all are Dynacrafts, I do this all for you all, you all are my boss. So as a loyal employee I have to inform you all of anything that will effect Dynacrafts. So do not fret, worry, or panic. I am just trying to find a healthy balance for all this, so there is going to be some waxing and waning in the production cycles until it is found. As always...

Good Puffen! 07
 

Rabid Kiwi

Accessory Maker
Rabid Kiwi you work at a furious pace bro ! Great stuff. Are you a Kiwi living in America?

Back about twelve to fifteen years ago I wanted to change my gamer tag. Well I wanted Rabid Eagle, but that was taken. So I just started trying random birds. I got Rabid Kiwi, then I liked it so much that I just kept it rolling. It describes my flavor of madness quite swimmingly, and has grown on me. At the time I really did not know that people from NZ were Kiwi's also there was that short span that Kiwi was slang for vagina, this was about the same time the 360 got that little camera.... I call those two years the Dick Pick years... Gave me a better understanding on the other side of unwanted advances. Nothing wrong with loving who you love, I am just not a fan of seeing other mens dicks. I was amazed at the amount of men who 1. Thought 7 inches was big. 2. Got really creative with their manscaping, like way too much time on it. 3. How they sent another male a dick pick and I would respond " Mines bigger " then they call me gay. Like I am not the one sending random dudes dick pics over a videogame system. 4. There needs to be some etiquette class on how to interact with people you are attracted to. 5. This one was the biggest out of them all. That we build an illusion of what we perceive people to be like, then fall in lust/love with that illusion, then hate the other person for not living up to that illusion..... This this is why I do not need much free time. I just think way to fucking much for my own good. Oh well as always...

Good Puffen! 07
 

Rabid Kiwi

Accessory Maker
IMG_3753JPG.jpg

Here you can see that the last of the Jamis line is ready to hit on the 22nd
IMG_3754JPG.jpg

All the scratches gone and it is looking nice.
IMG_3760JPG.jpg
I have quite a few of these pics for the six that are going to launch.
IMG_3765JPG.jpg

IMG_3758JPG.jpg

IMG_3761JPG.jpg

Ok ok that is enough. Still waiting on wood and parts so not much to report. I guess its that time to say....

Good Puffen! 07
 
Last edited:

The Stranger

Account Closed
Are you a Kiwi living in America?

Back about twelve to fifteen years ago I wanted to change my gamer tag. Well I wanted Rabid Eagle, but that was taken. So I just started trying random birds. I got Rabid Kiwi, then I liked it so much that I just kept it rolling. It describes my flavor of madness quite swimmingly, and has grown on me. At the time I really did not know that people from NZ were Kiwi's also there was that short span that Kiwi was slang for vagina, this was about the same time the 360 got that little camera.... I call those two years the Dick Pick years... Gave me a better understanding on the other side of unwanted advances. Nothing wrong with loving who you love, I am just not a fan of seeing other mens dicks. I was amazed at the amount of men who 1. Thought 7 inches was big. 2. Got really creative with their manscaping, like way too much time on it. 3. How they sent another male a dick pick and I would respond " Mines bigger " then they call me gay. Like I am not the one sending random dudes dick pics over a videogame system. 4. There needs to be some etiquette class on how to interact with people you are attracted to. 5. This one was the biggest out of them all. That we build an illusion of what we perceive people to be like, then fall in lust/love with that illusion, then hate the other person for not living up to that illusion..... This this is why I do not need much free time. I just think way to fucking much for my own good. Oh well as always...

Good Puffen! 07
lmao, this is the most random turn of events rant as an answer to that question.
Hilarious
 

Rabid Kiwi

Accessory Maker
IMG_3760JPG.jpg

So tomorrow is a shop day, and I still have not gotten a wood shipment. So I am going to complete the red futar line, then get the Bene Tleilax done for the next ghola. Yup that stuff came in. Also on the 22nd comes the Ghola option in the store. Now you can pick any one you want then buy the ghola add on and I will put the Ghola effect on it. This will add 4-7 days to the process time before shipping. This is also going to be a charged add on because I have to refinish a large part of it so the mats need to be paid for. But it is only going to be $10 more. The natural Ghola's are not going to have any price increase because they are done that way from the start and so there is no extra production cost, so there is no extra costumer cost.

There is also some testing going on with 5/16th bores and turnings. So just to let you all know that. I am still not sure if I can get this all to work because of the natural swelling wood has that is dependent on its local environment. But I am giving it the old college try. No promises it is all in testing still.

Pics have started for the next launch on the 22nd. It will be launching @ 4:20 again. I think it is right around 20 this time idk I really do not have a full count because of too many balls in the air atm. ( giggity ) So Get ready for the bi weekly Hype Train... Choo Choo Fellow Puffers. Oh and also...

Good Puffen! 07
 

Rabid Kiwi

Accessory Maker
IMG_3819JPG.jpg

Got a bit done today. So the Red/black Futar line is completed and going to finish. I got the Black Palm in so next monday I will start on the Black Futar. I also got the five Bene Tleilax done for the next Ghola launch July the 6th. So lets take a look.
IMG_3820JPG.jpg

The last of the Red/Black Futars looking all dapper like.
IMG_3821JPG.jpg
The Goncalo Alves for the Bene Tleilax launch of a ghola
IMG_3822JPG.jpg
The Red Elm for the Bene Tleilax launching a new ghola
IMG_3826JPG.jpg
The B side of the Bene Tleilax so you can see what the dark side of the moon looks like.
IMG_3817JPG1.jpg
The Knee that broke the batman.
IMG_3816JPG.jpg
No one cared who I was until I put on the mask...

Sorry, sorry other Jonathan took over there for a while and that guy's turn table can only do a 180....

So Futar line 7-6-20(6-7-20 eu) along with the next Ghola. 6-22-20(22-6-20 eu) is the launch of the Lady and her Duke with some Jamis. Also with the Bene Tleilax bring the MoP ghola effect. So lots going on here in the next few weeks, just dashing to the void and seeing were all this takes us. As always...

Good Puffen! 07
 

oddjobold

510 Vaporist
I brought a stem as a backup for my vortex.

It arrived and i was very impressed with the workmanship and it looked amazing. Very nice.

The tip was nowhere close to fitting. So i read here your meant to use a little sand paper to fit. So i sanded carefully testing as i went. I got a good fit and put it away.

Now when i look at the stem again the fit is lose. I am bummed that this stem is now less than ideal. The tips are a stadard size - why does the customer have to do this? Surely it would be better if maker did this before they went out? Disappointed.

I was considering using a little ptfe tape to get the fit to be better but i have no idea about toxicity.
 

TommyDee

Vaporitor
I cracked a wooden stem with my '20-M tip. No problems with any other tips in my stems yet this tip broke 2 of them. Turns out the '20-M was more prone to rolling the o-ring making the diameter of the o-ring bigger and my homemade stems gave way. I learned quickly that you have to twist the VC tip into wooden stems to avoid this rolling o-ring problem. I think it was the inherent looseness of the original fit that allowed the o-ring to roll. It doesn't do that with metal stems.
 

Rabid Kiwi

Accessory Maker
I brought a stem as a backup for my vortex.

It arrived and i was very impressed with the workmanship and it looked amazing. Very nice.

The tip was nowhere close to fitting. So i read here your meant to use a little sand paper to fit. So i sanded carefully testing as i went. I got a good fit and put it away.

Now when i look at the stem again the fit is lose. I am bummed that this stem is now less than ideal. The tips are a stadard size - why does the customer have to do this? Surely it would be better if maker did this before they went out? Disappointed.

I was considering using a little ptfe tape to get the fit to be better but i have no idea about toxicity.

The wood will swell and shrink depending on how humid it is and out side environment. The tips are not really a standard size they are all a bit off by .2-.8mm add that will the natural swelling/shrinking of the wood and for the best fit you have to just do it for the tip that you are going to use. You also can not use the tip before you size for it, and not work it too much because the tip will expand causing a bad fit. You can use a bit of hemp fiber to snug it up or an extra ring from the dyanvap store.

Also please pm me your first and last name. I will make it better.

***Mods I am sorry but I may double post tonight. I want to start putting up some of the lines coming out on the 22nd and I do not want @Oddjobold response to get lost in it. Again sorry I will try and wait a bit to see if I can cheese the edit cut off.***
 

Rabid Kiwi

Accessory Maker
IMG_3785JPG.jpgIMG_3789JPG.jpgIMG_3792JPG.jpg
IMG_3795JPG.jpgIMG_3798JPG.jpg

Duke Leto Atreides a strong noble man of the people. He lead by doing, with compassion and understanding. But he did not forgo the stick when needed. Made from Krugiodendron Ferreum ( Black Ironwood ) from Florida ( USA ) the rich grain and high density show the strong graceful line that the Duke walked daily. Dark grain contrasts highlighted with light refraction, these stems let all around know you are from one of the Major Noble Houses.

IMG_3770JPG.jpgIMG_3773JPG.jpg
IMG_3777JPG.jpgIMG_3780JPG.jpg
The Dirty Bene Tleilax the shameful Tleilaxu, yet they know the language of God. Through their vile and hated acts they can produce Ghola's. These Ghola's look like clones only with little bits of extra programmed in. Once put through an ultimate stress they can then regain the past memories of their host cells. There are little differences in the Ghola's and the Tleilaxu like a little bit of metal luster to their skin. It is this luster that we categorize these Ghola's. Made from Red Elm, and Goncalo Alves the arrival of these adds a new ghola effect to the universe.

Mother of Pearl Ghola Effect. This is a violet luster that can only be seen in sunlight. The grain and all other aspects will seem normal, until held in the right way, in the right light.


**************************

Ok so that is the first dump the Jessica line and the Ghola's I will put up Tomorrow.... Well dl002 is a ghola, just a very light one and it is one that is not going to be released for a while. I am also going to start having a small metal case you can buy as an add on for $5, with the Ghola any stem for $10 as well. That should be enough for now I will see you all tomorrow, despite it being my "down time" I just got too much stuff to do and not enough me's to do it lolz. As always...

Good Puffen! 07
 
Last edited:

oddjobold

510 Vaporist
I tried the extra o-ring. Not much good as the oring just gets pushed to the end of the tip.

However hemp fibre seems to have done it. Not sure why i did not think of this before. The stem is nice and snug now. I am a lot happier.

I did the sandpaper fit in a thunderstorm. The humidity was very high - this might be something to do with it.

Be carefull with that sandpaper folks! My suggestion - just take enough off so you can barley push in the tip with a struggle. I was a bit worried about thermal expansion cracking the wood so went a little further. I would not bother!
 

Rabid Kiwi

Accessory Maker
I tried the extra o-ring. Not much good as the oring just gets pushed to the end of the tip.

However hemp fibre seems to have done it. Not sure why i did not think of this before. The stem is nice and snug now. I am a lot happier.

I did the sandpaper fit in a thunderstorm. The humidity was very high - this might be something to do with it.

Be carefull with that sandpaper folks! My suggestion - just take enough off so you can barley push in the tip with a struggle. I was a bit worried about thermal expansion cracking the wood so went a little further. I would not bother!

Yes do not do wood work when it is raining unless you have a room that is held at a constant humidity. Also I remove the ring farthest from the cap it seems to get you a better fit with out going over that limit. I am glad that the fiber works for ya and I want to thank you for bringing up the issues you had. Offer still stands for a replacement, just im me your first and last name so I can pull your shipping info and sent it to you.

Good Puffen! 07
 
Rabid Kiwi,
  • Like
Reactions: Jill NYC

Rabid Kiwi

Accessory Maker
IMG_3801JPG.jpgIMG_3804JPG.jpgIMG_3827JPG.jpgIMG_3831JPG.jpgIMG_3836JPG.jpg

Lady Jessica was refined and noble enough. She was tasked with only producing a daughter, but out of love she gave her Duke Leto a son. Never to be his wife, but to be his only love, her life was that of an guardian angel to the heart and morality of House Atreides. Made from Curupay, also called Angico this wood has a natural refraction and luster, along with dark purple grain that is almost brown. These stems let those around you know that you hold love and honer in high esteem, that you will do what needs to be done to ensure the safety of those you love.

IMG_3839JPG.jpgIMG_3848JPG.jpgIMG_3854JPG.jpgIMG_3843JPG.jpg

Mother of Pearl Ghola Effect. This is a violet luster that can only be seen in sunlight. The grain and all other aspects will seem normal, until held in the right way, in the right light.


*******************************************

Ok so the Duke Leto Gholas and the five Jamis will be shown tomorrow. Then Monday at 4:20pm est they will all be on the site to buy, along with the add on case, and the MoP Ghola effect. Then we get geared up for the Eyes of the Ibad Ghola and the Futar line... You know I was one for Never sitting still. As always...

Good Puffen! 07
 
Last edited:
Top Bottom