Divine Tribe atty's

[Steven]

Just wanted to say HEY COOL to the poster (see comment here) who shared this lil mini bubbler and o-ring here on the thread, works pretty well ! Here's an image:

That's the v2.5 DT Donut on an IPV 4S, in temp mode, 20 Joules @ 320 F.
Of course, I prefer Matt's Bubbler Attachment he offers on the site, and generally use that.
He's got male/female and 14/18 mm sizes. Works great. I'll get a pic of it up here as soon as I clean up my bubbler, she's gotten a bit dirty with use.

All the best, everyone !

Do you guys actually like these little bubbler attachments? I vape quite often and when I used these back then, it would clog very fast because the diffuser holes are so small and so close to the glass wall.
If you don't mind the size, I'd suggest nectar collectors or the pinnacle pro bubbler attachment. I posted pictures a while back in the earlier threads
http://fuckcombustion.com/threads/divine-tribe-attys.14455/page-20

 

[skayleef]

Which temp control mod works best have you guys found with the DT 2.5? I am thinking about getting the most optimal TC mod for the DT, I know he sells the eleaf and mini invader, but I have read so many terrible things about the invader, and the eleaf is an eleaf. If either of these is just A+ perfect with the DT 2.5 and DT 3.0, I would like to know!

 

[Hoosier]

ive been using the eleaf since july. battery lasts forever and its a great combo, as long as you dont overload the dv2.5.

 

[ChrisCT]

Which temp control mod works best have you guys found with the DT 2.5? I am thinking about getting the most optimal TC mod for the DT, I know he sells the eleaf and mini invader, but I have read so many terrible things about the invader, and the eleaf is an eleaf. If either of these is just A+ perfect with the DT 2.5 and DT 3.0, I would like to know!

I have the eLeaf iStick 40wTC, and I find I would benefit from having a box mod which allowed me to set the max voltage/wattage in TC mode. I set mine to 310*F, but it initially fires with all 40W. It results in blackened material on the donut. I am going to check out the IPV4s next, hopefully I'll have better results with the ability to keep the power low.

 

[Nube Scrutator]

Invader Mini works great for me @10-11 watts, 300-350F:

 

[zikzak]

Ipv d2 with dt 2.5 is doing awesome for myself at 19 joules 305F. I personally like the feel /weight of the mod. Seamless operation thus far. I do a fair amount of ejuice (betty) out of a uwell tank w the d2 as well and find it versatile for that world as well.

 

[sweetherb]

Invader Mini works great for me @10-11 watts, 300-350F:

Yep, the ability to set the temp AND the maximum watts is precisely why I love this mod so much!

 

[Steven]

Which temp control mod works best have you guys found with the DT 2.5? I am thinking about getting the most optimal TC mod for the DT, I know he sells the eleaf and mini invader, but I have read so many terrible things about the invader, and the eleaf is an eleaf. If either of these is just A+ perfect with the DT 2.5 and DT 3.0, I would like to know!

What's your biggest concerns with the invader mini? I been using mines for months and I love it. The only issues i have with mines is that sometimes I must press the power button more than 5 times to turn it off. Also maybe once every few months it will turn off and the settings much be reentered. I haven't experienced the invader jumping out of temp Control while using it. It only happens after cleaning and I put the donut on the atty when it's still too hot. The feature with ability to Control Wattage and temp is enough to get this over the e leaf imo

 

[elmoe420]

Which temp control mod works best have you guys found with the DT 2.5? I am thinking about getting the most optimal TC mod for the DT, I know he sells the eleaf and mini invader, but I have read so many terrible things about the invader, and the eleaf is an eleaf. If either of these is just A+ perfect with the DT 2.5 and DT 3.0, I would like to know!

The mod I most often use with the DT 2.5 is the Sigelei 150W TC. Right now running 305 F @ 12J.

 

[JETSlnw]

Does every atty has leak? If so I'll probably stop using this.. Wasted concentrates

 

[Thenewguy821]

Through all I have read here, I am looking forward to receiving my DT2.5. Ordered the kit, with the e leaf 40w and the pyrex tip. Hope everyone had a great thanksgiving.

 

[b0]

Just noticed a really small crack in my atomizer, almost not visible. Should I stop using my DT2.5?

 

[Humboldt69]

I Just receive my new attys and I am super stoked to try these out but my local shop only has the eleaf 60w TC and not the eleaf 40w TC , does anyone knwo if its ok to use the 60w TC?

It will work fine on anything over 40w.

 

[jpdnkstr]

It will work fine on anything over 40w.

It will work at lower power levels also, the limiting factor is usually the resistance cut off of the mod....

 

[JETSlnw]

So can anyone tell me if all these atomizer got leaks?

 

[Humboldt69]

So can anyone tell me if all these atomizer got leaks?

As long as you only put in enough for one session in the v2.5 , and cold clear it between hits, there is not any leakage. If you try storing product for later in your atty, it's going to leak through the air holes.

I'm one of those guys who fills mine for the day too. I just keep it up-right, and cold clear it, and its fine to me. Just make sure its off in your pocket.

 

[ChrisCT]

I'm one of those guys who fills mine for the day too. I just keep it up-right, and cold clear it, and its fine to me. Just make sure its off in your pocket.

Hey Humboldt69, can I ask what the maximum amount you load at one time has been?

 

[kernal6500]

I only put about a grain of rice sized amount of concentrate. The holes are extremely close to the donut.

 

[vjt324]

Are there any coupons for ineedhemp.com???! Looking to make a purchase.

 

[Steven]

I only put about a grain of rice sized amount of concentrate. The holes are extremely close to the donut.

Me too. I load an unpopped popcorn kernel size

 

[kernal6500]

When is the version 3 coming out !?

 

[Steven]

When is the version 3 coming out !?

I just spoke with Matt on this matter and he informed me that a version 2.7 will be coming in 2 weeks where the air holes are ingeniously designed to come from below the donut. I'm not exactly sure when version 3 will be out but it will arrive with the dry herb atty as well

 

[sethhobrin]

Just got one of these. The wick does not stay in the bottom of the chamber. How do you keep it down there?

 

[sethhobrin]

Also what wattage and temp is most appropriate with the invader mini? Still having problems keeping the donut to not pop up and ruin my fun when I take hits. I am practicing taking very slow draws to try not to keep it from popping up. Is that just what needs to be done with this unit? I seen one video say to use 240/48watts and another that says 320/13 watts and unsure which is correct or if either will damage the unit.

 

[sweetherb]

Also what wattage and temp is most appropriate with the invader mini? Still having problems keeping the donut to not pop up and ruin my fun when I take hits. I am practicing taking very slow draws to try not to keep it from popping up. Is that just what needs to be done with this unit? I seen one video say to use 240/48watts and another that says 320/13 watts and unsure which is correct or if either will damage the unit.

I have had mine for quite a while now. Although I certainly do not claim to be an expert, the best setting for me has proven 13.5w and 220f. This gives nice hits without too much splatter.