Hey everyone, over the last week or so a few redditors and I conducted a bunch of experiments with mesh concentrate pads (mostly S&B crafty pads) in ceramic donut concentrate atomizers for loading a larger amount and getting multiple hits between reloads. After many tests I found that the best high capacity "Load and Go" set up was a Divine Tribe DC gen 2 dry herb atty with crafty pad mesh. The top piece of the dc gen 2 was less than optimal because of the perforated screen that presses down into the bowl. I found that the castle RDA was a perfect fit for the base of the DC and also is the perfect height for a buffer crafty pad to keep everything compressed onto the oven and prevent splatter.
I'm selling fully assembled units for $45, if you dont feel like making one yourself.
DIVINE CASTLE OIL CARTRIDGE - "CASTLE CARTRIDGE" for short
FEATURES:
-Holds up to .7 g of concentrate. Tested mostly with pull to snap shatter
-Full temperature control, keeps hits tasting fresh and allows anything from light microdoses to large rig sized hits
-4 airflow settings for customizing ratio of vapor/outside air. Personally I like setting it to 1 medium hole and using it as a carb while riding the button
-Interchangeable 510 drip tips. Each unit will come with a metal drip tip and a glass drip tip. Currently investigating ways to make a 510 driptip that is a male joint for connecting to water pipes. You can install a long drip tip for higher temp hits for cooler vapor
-Microdose dry herb (.05-.1) with single mesh installed or remove both meshes to use dc gen 2 with dry herb as intended (full pack is about .25)
-No noticeable leaks after 3 grams of tests, absolutely 0 reclaim on build deck or base of herb pod.
-No need for cooldown hits. All the percs of the Hercules without the 1-3 minutes of cooldown hits.
-Easy to load. Recently I've enjoyed taking a glob and squishing it on the bottom of the top mesh, then lightly press the pad into the oven dab facing the bottom mesh, then I'll heat to about 300 and wait a few seconds then fully press the tip pad so it is nearly flush with the top of the ceramic base. This way you can load and soak in large amounts of product without having most of it pooling at the top of the mesh, resulting in faster vaporization and nearly eliminates splatter.
-Group friendly. once preheated to temperature it can be passed around and ripped while riding the power button, no pulsing or draw speed technique required
Build and size comparisons:
https://imgur.com/a/Atqcn
I am getting 15-25 hits off a load. Single pad holds about .3 but with both pads it's more like .5-.7
$45 plus shipping for the unit, glass drip tip, heat sink, plus all other parts of both atomizers (castle build deck, original top for dc gen2) send me a pm of your address and PayPal email if you're interested. Once I get enough orders I'll receive the paypal orders and get materials. All units should ship within a week of receiving all materials.
The castle rda top half will be black on the shipped units instead of shiny steel. Should look more cohesive with the black ceramic base of the DC
Let me know of any questions you guys have! I'll assemble each unit as shown + another crafty pad inside the rda which I found helps compress the top pad in dual mesh mode for bigger clouds and faster extraction.
Tldr; temp controlled, group friendly, high capacity wax tank that can also vape and microdose herbs. $45, pm me to order.
I'm selling fully assembled units for $45, if you dont feel like making one yourself.
DIVINE CASTLE OIL CARTRIDGE - "CASTLE CARTRIDGE" for short
FEATURES:
-Holds up to .7 g of concentrate. Tested mostly with pull to snap shatter
-Full temperature control, keeps hits tasting fresh and allows anything from light microdoses to large rig sized hits
-4 airflow settings for customizing ratio of vapor/outside air. Personally I like setting it to 1 medium hole and using it as a carb while riding the button
-Interchangeable 510 drip tips. Each unit will come with a metal drip tip and a glass drip tip. Currently investigating ways to make a 510 driptip that is a male joint for connecting to water pipes. You can install a long drip tip for higher temp hits for cooler vapor
-Microdose dry herb (.05-.1) with single mesh installed or remove both meshes to use dc gen 2 with dry herb as intended (full pack is about .25)
-No noticeable leaks after 3 grams of tests, absolutely 0 reclaim on build deck or base of herb pod.
-No need for cooldown hits. All the percs of the Hercules without the 1-3 minutes of cooldown hits.
-Easy to load. Recently I've enjoyed taking a glob and squishing it on the bottom of the top mesh, then lightly press the pad into the oven dab facing the bottom mesh, then I'll heat to about 300 and wait a few seconds then fully press the tip pad so it is nearly flush with the top of the ceramic base. This way you can load and soak in large amounts of product without having most of it pooling at the top of the mesh, resulting in faster vaporization and nearly eliminates splatter.
-Group friendly. once preheated to temperature it can be passed around and ripped while riding the power button, no pulsing or draw speed technique required
Build and size comparisons:
https://imgur.com/a/Atqcn
I am getting 15-25 hits off a load. Single pad holds about .3 but with both pads it's more like .5-.7
$45 plus shipping for the unit, glass drip tip, heat sink, plus all other parts of both atomizers (castle build deck, original top for dc gen2) send me a pm of your address and PayPal email if you're interested. Once I get enough orders I'll receive the paypal orders and get materials. All units should ship within a week of receiving all materials.
The castle rda top half will be black on the shipped units instead of shiny steel. Should look more cohesive with the black ceramic base of the DC
Let me know of any questions you guys have! I'll assemble each unit as shown + another crafty pad inside the rda which I found helps compress the top pad in dual mesh mode for bigger clouds and faster extraction.
Tldr; temp controlled, group friendly, high capacity wax tank that can also vape and microdose herbs. $45, pm me to order.
