3x7" caged plates dp-rp37 now available at Amazon.ca via Prime
https://www.amazon.ca/Dabpress-dp-rp37-Anodized-Temperature-Hydraulic/dp/B078NMT9L2
https://www.amazon.ca/Dabpress-dp-rp37-Anodized-Temperature-Hydraulic/dp/B078NMT9L2
Dabpress Rosin Plates
- Thread starter dabpress.com
- Start date
@psychonaut Good morning!
I am ready to post a thread about information of new products. Thank you for your reminding.
In fact, rosin pre press mold and rosin filter bag have reached amazon warehouse one week before. But it is not available now
I will give more promo to FC friend once it was done.
Thank you all
I am ready to post a thread about information of new products. Thank you for your reminding.
In fact, rosin pre press mold and rosin filter bag have reached amazon warehouse one week before. But it is not available now
I will give more promo to FC friend once it was done.
Thank you all
Thanks for the heads up, I just ordered mine as well!
I am sorry i don't communicate with my friends.
Recently I am busy on creating some new products and small tool to improve efficiency.
I do hope it can help everyone. Thank you!
I will attach this free PVC sheet in the package of rosin bags and pre-press mold
Recently I am busy on creating some new products and small tool to improve efficiency.
I do hope it can help everyone. Thank you!
I will attach this free PVC sheet in the package of rosin bags and pre-press mold
Last edited:
I'm also testing cylinder pre press mold. It is a little bit hard to make perfect pucks, so please do it with bamboo plank attaced in the package, It will be easy to get a great one.
Finally
new products dp-rp47 have reached amazon warehouse. It has 4pcs 300 watts heater and two temp sensor.
Cylinder pre press mold and 40 packs rosin press bag is available on amazon.
dp-rp37 caged plates is available on amazon.ca (Canada amazon).
I will offer reasonable discount to my FC friend.
About details, i will try my best to post thread here asap.
You guys give us a lot of help to improve quality, new idea for design and unbiased review.
Thank you very much
Roger
new products dp-rp47 have reached amazon warehouse. It has 4pcs 300 watts heater and two temp sensor.
Cylinder pre press mold and 40 packs rosin press bag is available on amazon.
dp-rp37 caged plates is available on amazon.ca (Canada amazon).
I will offer reasonable discount to my FC friend.
About details, i will try my best to post thread here asap.
You guys give us a lot of help to improve quality, new idea for design and unbiased review.
Thank you very much
Roger
Great, Roger!
Are you intending to offer you own frames sometime?
And what's about even larger plates?
Yes! Mini Hydraulic rosin press kit powers with hydraulic hand pump/foot pump/electric pump made of stainless steel.
1, Hydraulic rosin press kit with 3/8" NPT strew teeth, but without hand pump.
2, Hydraulic rosin press kit attach a CP-390 hydraulic hand pump.
Two models for choice! the item will be available one month.
We also start to design bottle jack rosin press and manual rosin press, it will be available in next two months.
Thank you
Roger
Great, Roger!
Are you intending to offer you own frames sometime?
And what's about even larger plates?
What size is for large plates? Currently we offer pid temp controller with 4pc heaters, so it will be okay to make large plates.
Here is phototype
Thank you!
Coupler and fitting is VERY complicated, i have to check a lot of information. so finally we offer the unit with hydraulic hand pump, and the unit without pump to pair a different kind of pump.
Doktor Dub
Well-Known Member
All these news look pretty good! I still wait for an european warehouse or amazon.de, would love to get an all in one solution from you without dealing with customs....
Have a great day!
Have a great day!
Nice updates! 
The PVC sheet to slide pucks into the rosin sleeve looks pretty nice! The all-in-one definitely looks like it will go up against a number of units on the market!
Great work Roger and @dabpress.com team, ya'll are doing GREAT! Thanks for listening to us here on FC
The PVC sheet to slide pucks into the rosin sleeve looks pretty nice! The all-in-one definitely looks like it will go up against a number of units on the market!Great work Roger and @dabpress.com team, ya'll are doing GREAT! Thanks for listening to us here on FC
Hackerman
User
I also ordered my bags and press last night.
I love the caged unit in the pictures above.
Maybe put some kind of pivot in the center to make it compatible with drip tek. Albeit, drip tek is actually better for larger loads but if it is possible, it would be another niche market this press would attract.
Very nice quality products from this company.
I think I am going to sell my 3x7 plates and get one of the new units when it comes out.
I love the caged unit in the pictures above.
Maybe put some kind of pivot in the center to make it compatible with drip tek. Albeit, drip tek is actually better for larger loads but if it is possible, it would be another niche market this press would attract.
Very nice quality products from this company.
I think I am going to sell my 3x7 plates and get one of the new units when it comes out.
Perhaps just a stainless steel piece you can rest the top of the frame down upon, at like a 15 degree angle? I agree to have compatibility with drip tek would be ideal for that sick lil all-in-one!
Cylinder pre-press mold and filters separate on amazon now
$40 - https://smile.amazon.com/Dabpress-i...UTF8&qid=1527805482&sr=8-19&keywords=dabpress
$31 - https://smile.amazon.com/Dabpress-i...UTF8&qid=1527805603&sr=8-10&keywords=dabpress
$40 - https://smile.amazon.com/Dabpress-i...UTF8&qid=1527805482&sr=8-19&keywords=dabpress
$31 - https://smile.amazon.com/Dabpress-i...UTF8&qid=1527805603&sr=8-10&keywords=dabpress
MinnBobber
Well-Known Member
@psychonaut , thanks.
Please report how they work.
Interesting that he lists filters as reusable. Are they in practice?
He says 3.5 - 7 gm. Wonder how they will work on 1.5 - 2 gm. Small puck without filter.
And if they will work well with a little light hydraulic press help, for a nice tight puck?
Please report how they work.
Interesting that he lists filters as reusable. Are they in practice?
He says 3.5 - 7 gm. Wonder how they will work on 1.5 - 2 gm. Small puck without filter.
And if they will work well with a little light hydraulic press help, for a nice tight puck?
Will do. I am not sure what reusable means, perhaps he is talking about cutting the filters down depending on how much you're using, so not really reusable. The filter will stretch and compromise after a squish, they can be reused but I dont think I would.
For 2gr or under I would just press those as loose nugs pre-pressed (if necessary?) or as single nug squishes. Popcorn buds I'd pre-press in the mold.
I think with your own weight, since it's 1.18" wide, you really generate a lot of pressure just with your hands, but I can try it out in the press, easy enough with the cage
@dabpress.com Roger do you know when rosin sleeve will be available on Amazon?
https://www.dabpress.com/collections/rosin-filter-bag/products/dp-bt160n
https://www.dabpress.com/collections/rosin-filter-bag/products/dp-bt160n
@dabpress.com Roger do you know when rosin sleeve will be available on Amazon?
https://www.dabpress.com/collections/rosin-filter-bag/products/dp-bt160n
The rosin sleeve bag have a issue.
Bag will be open at the cutting position if pulling it off. I have tried to different sewing method but failure.
Cutting bag work great but some customers will complain about it.
This rosin seelve bag have no stitching with seamless mesh.
So I have no plan to sell on amazon.