Summer
Long Island, NY
Pic please.
Cooling stems for Splinter, Stempod, Tubo, Lil Bud, Mil
- Thread starter HughJundys
- Start date
Pic please.
muunch
hotboxing the cockpit
cybrguy
Putin is a War Criminal
Those look like the wider dimension of the HA tubes from top to bottom rather than gradually getting wider near the mouth. If the diameter of the ones @VAPEHUNTER found on Ebay are the same the joints may well fit in them.
@muunch could you share a link to the one above? Thanks.
Sorry this tube discussion is a little off topic, but just a little as many folks who buy the stems will really want a carrier for them.
muunch
hotboxing the cockpit
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
.Gone mine factory direct on local level,they costed 2-3 cents..
Cilleire
EuroVapeSim2
https://www.instagram.com/p/BwjunUbn91i/?utm_source=ig_share_sheet&igshid=1gze0ufqs8yen
It looks like a 26mm lenght joint which would be unsuitable for the splinter and Z, would be cool to get fumed or different coloured glass, or even variations on the spike style. No sign of a price on the instagram and the item hasn't been listed in his dhgate store yet.
It looks like a 26mm lenght joint which would be unsuitable for the splinter and Z, would be cool to get fumed or different coloured glass, or even variations on the spike style. No sign of a price on the instagram and the item hasn't been listed in his dhgate store yet.
el sargantano
Well-Known Member
I think so.
Indeed, you can let the result liquid dry on a plate to get a gummy kind of concentrate and keep playing with it.
I suggest using only a grain/rice or similar alcohol used for homemade brewery.
If I'm wrong, please correct me, I don't wanna poison nobody!
On the other hand, there's the easy trick of putting your glass stems in a cup of fat milk and microwave it at low temp for a couple of minutes and then your stems will be almost comp,ete clean and you'll get a yummy sunday morning coffee.
I barely feel a soft body effect, by the way
Ps: VAPEnsiero hahaha, good one!
Eskcharls
Grenn Dever
Just found this weird tube searching around amazon, its like cooling stem with horns expensive but cool looking lol
el sargantano
Well-Known Member
To protect my stems I found some vitamin tubes about the perfect size
With some tweaking corks and a wooden ring it fits perfetcly locked
With some tweaking corks and a wooden ring it fits perfetcly locked
Last edited:
sickmanfraud
Well-Known Member
You can use the same ethanol (95% food grade ethanol) to clean your stem(s) multiple times and then, when you have a significant amount of AVB you can make a tincture of the AVB and stem cleaning ethanol to make a pretty good tincture for sleep.
Stonedbadger
Well-Known Member
Does anyone have a recommendation for a stem for the splinter z with a glass screen?
Cheers
Cheers
Easywider
Simple is the way
Stempod cooling stem has a glass screen. Works well with my US Z.
sickmanfraud
Well-Known Member
This week I received several cooling stems from @funkyjunky.
So far I used a Purple Heart medium length stem http://shop.lamart.ch/index.php?route=product/product&path=64_77&product_id=426 with the spikey glass inserts http://shop.lamart.ch/index.php?route=product/product&path=64_77&product_id=317
I can not believe that an $11 spikey stem could make such a difference. There is some draw resistance, but I don't mind it all. The hits are cool and it is only on the exhale that I realize the massive size of the hit I just took.
The capsule aspect of the stem gives you some versatility, too. If you are in PAIN and need to medicate now, you can use the capsule stem with the capsule open to the heater for quicker extractions or you can use the capsule closed and have a leisurely session or several on-demand sessions.
I also received a spikey bent stem. I have not tried the bent stem because the joint is too deep. It doesn't even fit in any of my Tubo products. If Teflon Tape is my only choice, I could try that, but shortening it would be cool. It is well made and the glass seems thicker than the standard bent stem.
So far I used a Purple Heart medium length stem http://shop.lamart.ch/index.php?route=product/product&path=64_77&product_id=426 with the spikey glass inserts http://shop.lamart.ch/index.php?route=product/product&path=64_77&product_id=317
I can not believe that an $11 spikey stem could make such a difference. There is some draw resistance, but I don't mind it all. The hits are cool and it is only on the exhale that I realize the massive size of the hit I just took.
The capsule aspect of the stem gives you some versatility, too. If you are in PAIN and need to medicate now, you can use the capsule stem with the capsule open to the heater for quicker extractions or you can use the capsule closed and have a leisurely session or several on-demand sessions.
I also received a spikey bent stem. I have not tried the bent stem because the joint is too deep. It doesn't even fit in any of my Tubo products. If Teflon Tape is my only choice, I could try that, but shortening it would be cool. It is well made and the glass seems thicker than the standard bent stem.
caseball2051
Well-Known Member
Are there any "heady" styles of these stems available?
caseball2051
Well-Known Member
Commissioned a cooling stem from joda_glass who is a member here @VaPeD&CoNfUsEd I think is the check tag although we communicated via fbook where he is more active.
Sorry for the orientation on a couple of these.
Sorry for the orientation on a couple of these.
Easywider
Simple is the way
Commissioned a cooling stem from joda_glass who is a member here @VaPeD&CoNfUsEd I think is the check tag although we communicated via fbook where he is more active.
Sorry for the orientation on a couple of these.
stunning.sickmanfraud
Well-Known Member
Just a quick shout out to @funkyjunky & Company and all here for the new Nub stem.
I just received it (in 5 days from Switzerland) and used it last night. It can get warm if you take long hits one after the other but the cooling from the design of this stem is just wonderful.
I would have to say that the XL8R (long) cools better. But you will not find anything this size that cools so well. I would not take my OG Xl8R out of the house due to its size. The Nub is Perfect.
https://shop.lamart.ch/index.php?route=product/product&path=64&product_id=549
The glass is pretty thick I don't think it would survive a fall on a tile floor, but I would be very surprised if it broke on grass, carpet or even a wood deck.
Your luck may be different than mine so don't drop it at all is the best advice I can give.
EDIT: IMPORTANT INFO: This is a stem with a 22mm length which means it will not fit most Splinter models but works well with my Custom Splinter Z.
I just received it (in 5 days from Switzerland) and used it last night. It can get warm if you take long hits one after the other but the cooling from the design of this stem is just wonderful.
I would have to say that the XL8R (long) cools better. But you will not find anything this size that cools so well. I would not take my OG Xl8R out of the house due to its size. The Nub is Perfect.
https://shop.lamart.ch/index.php?route=product/product&path=64&product_id=549
The glass is pretty thick I don't think it would survive a fall on a tile floor, but I would be very surprised if it broke on grass, carpet or even a wood deck.
Your luck may be different than mine so don't drop it at all is the best advice I can give.
EDIT: IMPORTANT INFO: This is a stem with a 22mm length which means it will not fit most Splinter models but works well with my Custom Splinter Z.
vapenerd
Well-Known Member
How did I miss this thread? Thanks everyone for posting, great read. 
Ordered some cooling stems for the Tubo. The Nub, a beech capsule stem with the a-maze cooler and a spiked mouth piece. Oh, and ice stems for the E-Nano and a Dynavap beaded stem from Mistvape.
Can't wait to try this stuff out. Let's cool that shit down!
Ordered some cooling stems for the Tubo. The Nub, a beech capsule stem with the a-maze cooler and a spiked mouth piece. Oh, and ice stems for the E-Nano and a Dynavap beaded stem from Mistvape.
Can't wait to try this stuff out. Let's cool that shit down!
vapenerd
Well-Known Member
Just got home and found the mouth pieces in the mail.
So let's give them a try! This will be fun!
sickmanfraud
Well-Known Member
Just a quick shout out to @funkyjunky & Company and all here for the new Nub stem.
I just received it (in 5 days from Switzerland) and used it last night. It can get warm if you take long hits one after the other but the cooling from the design of this stem is just wonderful.
I would have to say that the XL8R (long) cools better. But you will not find anything this size that cools so well. I would not take my OG Xl8R out of the house due to its size. The Nub is Perfect.
https://shop.lamart.ch/index.php?route=product/product&path=64&product_id=549
The glass is pretty thick I don't think it would survive a fall on a tile floor, but I would be very surprised if it broke on grass, carpet or even a wood deck.
Your luck may be different than mine so don't drop it at all is the best advice I can give.
EDIT: IMPORTANT INFO: This is a stem with a 22mm length which means it will not fit most Splinter models but works well with my Custom Splinter Z.
I just wrapped a couple of turns of PTFE tape outside the vapor path and the Nub now fits my Custom Splinter.
sickmanfraud
Well-Known Member
I just received a smoked glass KinG Kooling set (not my spelling) from RBT.
The smoked glass looks thicker and it weighs more on the scale than the clear Chinese xl8r.
I will try to report back once I have taken it for a test drive.
The smoked glass looks thicker and it weighs more on the scale than the clear Chinese xl8r.
I will try to report back once I have taken it for a test drive.