Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Nope
-
SCAM WARNING! See how this scam works in Classifieds.
Cloud Connoisseur Glass
- Thread starter iDRINKBLEACH
- Start date
Nope
FlimsyKnuckle
Well-Known Member
It is a joy in reverse, and the glug is satisfying. I just use mostly 18mm and wonder.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I remember now, the reason the mouthpiece is not 18 mm, is because it would sit much larger on top of the narrower diameter glass there, which is like that for the air flow and cooling, so it looked cleaner this way as well
Sparkpug
Well-Known Member
After having and using a Calypso, a Protege and an Influx I think I prefer the Influx the most. I've already put the Protege on a shelf and I hardly use the Calypso since I don't really find myself reaching for the TM2. Then if I use the TM2 I want my Influx.
Once the Influx gets going it really pulls and makes it super easy to take long rips. It seems cooler than the Protege too. The Protege requires a bit more of a pull and after using it and only it for a few weeks, I tried my Influx and have not gone back.
Once the Influx gets going it really pulls and makes it super easy to take long rips. It seems cooler than the Protege too. The Protege requires a bit more of a pull and after using it and only it for a few weeks, I tried my Influx and have not gone back.
Fearless Disaster
Well-Known Member
I have seen the light. I have been seeing people use these drop down ashcatchers and advocating for them. I never quite understood why, but I trusted in the entiverse. my dropdown arrived yesterday and I put it on the calypso. Once I looked down at the dropdown from the user pov it all makes sense, at least if you are right handed. I have just ordered more.
TedJones
Well-Known Member
Different strokes! I found the opposite. Influx was a hard pull for me, but agree it wasn’t too bad once you get it going. I do use minimal water, just above the perc, in the Protege. And without attachments if feasible
It is awesome and a great DD. Would be cool if oriented the other way was as an option. I’ve always pulled the plug with my left hand
Easy enough to pull the bowl in most cases though.
Electrofever
Well-Known Member
So sad 
Anything that can be done ?
Anything that can be done ?
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
So sad
Anything that can be done ?
There's some people like good vibes who could try to salvage repair, maybe Rogue or other glass workers, someone local... Always a risk, some things cannot even be salvaged for any repair, but that seems like a simple joint connection at least
Electrofever
Well-Known Member
Being in Europe makes it a little far and probably too expensive for such a piece. Will have to see and find if a local glass worker even exists around my place. Will have a look ! But I wonder if I shouldn’t just order another one on CC’s website 
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Being in Europe makes it a little far and probably too expensive for such a piece. Will have to see and find if a local glass worker even exists around my place. Will have a look ! But I wonder if I shouldn’t just order another one on CC’s website
Oh, yeah, definitely better local, always tricky in another country... Certainly fastest and simplest to just order another one if you can afford it, repairs aren't exactly cheap typically either anyway, only alternative
But watch out if you call it "China glass." While there are downsides still to it being made in China (long waits, sometimes poor QC), these are still original designs rather than the sort of copycat designs usually associated with the term.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I've actually waited longer than anything for some US glass specifically lol it's all relative
Maybe ask @Kalu ? I know he works with glass...Being in Europe makes it a little far and probably too expensive for such a piece. Will have to see and find if a local glass worker even exists around my place. Will have a look ! But I wonder if I shouldn’t just order another one on CC’s website
Gomaruana
Well-Known Member
how is that injector heated up? Looks really niceMy Vertex and Xeric just landed and I am stunned. Absolutely gorgeous in person. I wish I were a better photographer, especially shooting glass:
Unfortunately I have a bad cold right now so I haven't hit it yet. Maybe I will still take it for a test drive. Perhaps it will speed up my healing.
It's a Cloud Connoisseur Atlas:
Atlas by Cloud Connoisseur (iDB)
So if you have been following the halo this will have same upcoming internals but the heater is a SS cartridge with ceramic. Surrounded in boro. The release of this vape will follow shortly after the halo. The body it’s in now is just the prototype body and will be dressed like the halo.
fuckcombustion.com
It's a cartridge heater surrounded by rubies powered by a VVPS. I adore it although I don't use it as often as I should.
jbm
Well-Known Member
How come?
Electrofever
Well-Known Member
Thank you, I was thinking about him, should send him a message !
Sparkpug
Well-Known Member
After I posted I wondered why I rarely use the Calypso. My house is getting the master re-modeled and its a disaster zone so I've decided that in order to stay lazy I would rotate thru my pipes and clean them when the room is done.
So, the Influx got dirty after almost 2 straight weeks of 24/7 use. I swapped the Calypso in (with an E-Nano and same everything else but with a 14mm water pipe stem) and took the most flavorful rip I might have ever had. I filled it to the brim and then took a bunch of test pulls until I was no longer sucking water for filling level. It needs 2 pulls to kill the stem like the Influx and unlike the Protege but they are seriously tasty. It seems to stay cool too, with room temp water.
I've been swapping back and forth between the two of them.
So, the Influx got dirty after almost 2 straight weeks of 24/7 use. I swapped the Calypso in (with an E-Nano and same everything else but with a 14mm water pipe stem) and took the most flavorful rip I might have ever had. I filled it to the brim and then took a bunch of test pulls until I was no longer sucking water for filling level. It needs 2 pulls to kill the stem like the Influx and unlike the Protege but they are seriously tasty. It seems to stay cool too, with room temp water.
I've been swapping back and forth between the two of them.
Fearless Disaster
Well-Known Member
One CC accessory that I'd love to see is a 14mm bubble trap plug like the 10mm passthrough plug. I might be in the minority but I like using plugs as part of my ritual
El Duderino
The Dude abides.
It took a while, and iDB and I had a bit of a mix-up – but the result is wonderful: the first bubble trap Prophet in the wild:
I think the photos speak for themselves – this piece is simply stunning!
Currently, I'm using it with the new micro dose bowl from CC with the Omega, and it seems like a dream team – a one-hit extraction at relatively low temperatures is no problem with this combo.
I was initially a bit surprised by the rather restricted airflow, quite different from the Calypso or the J-hooks I usually use. After a short familiarization period and adjusting my draw strength, the Prophet and I are slowly getting along, and I'm confident we'll soon be thick as thieves.
The Prophet is definitely a unique experience and quite different from the other pieces I own. A very interesting piece, and I'm looking forward to future experiments.
I think the photos speak for themselves – this piece is simply stunning!
Currently, I'm using it with the new micro dose bowl from CC with the Omega, and it seems like a dream team – a one-hit extraction at relatively low temperatures is no problem with this combo.
I was initially a bit surprised by the rather restricted airflow, quite different from the Calypso or the J-hooks I usually use. After a short familiarization period and adjusting my draw strength, the Prophet and I are slowly getting along, and I'm confident we'll soon be thick as thieves.
The Prophet is definitely a unique experience and quite different from the other pieces I own. A very interesting piece, and I'm looking forward to future experiments.
Last edited:
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Wooo! Gorgeous. Don't forget to try it with a little bit of water in reverse too eventually, churrgler bub is also a unique experience
Sparkpug
Well-Known Member
Nice piece @El Duderino
Well, again! I swapped the Protege in today because the Calypso is a bit gunked up atm and I never cleaned the Influx. Wtf BBQ?! This pipe is awesome. I figured, due to the harder pull I can overfill it a bit and pretty much filled the entire can. It's a bit of a lung buster but it gives an amazing experience. Someone else might drink it but I don't have the lung power to.
All of the Cloud Connoisseur glass is pretty wonderful.
Well, again! I swapped the Protege in today because the Calypso is a bit gunked up atm and I never cleaned the Influx. Wtf BBQ?! This pipe is awesome. I figured, due to the harder pull I can overfill it a bit and pretty much filled the entire can. It's a bit of a lung buster but it gives an amazing experience. Someone else might drink it but I don't have the lung power to.
All of the Cloud Connoisseur glass is pretty wonderful.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Calypso and more in stock on the site now:
And new glass accessories coming too:
And new glass accessories coming too:
jbm
Well-Known Member
So bubble trap coil handles, but no separate bubble trap Calypso mouthpieces. And that website is, to put it mildly, a fucking shitshow.Calypso and more in stock on the site now:
And new glass accessories coming too: