Cheap High Quality Bubbler

[Frederick McGuire]

Is there one cheap bubbler that anyone could suggest that would pair really well with the Cloud Evo and still be decent for doing dabs?

I am thinking something that is small in volume - The D020 series have always stood out as something that might work for me.


This looks good http://www.dhgate.com/store/product/d020-bubbler-hand-blown-glass-vase-perc-water/175832535.html

Pieces are cheap enough that I guess I could get two different bubblers to serve different purposes.

Imo either the GB 187 from yingmin, or the FC-187 from steven fits your description perfectly.

Imo the d020 is a bit small for the evo, but it would work fine if you like the look of it

The 187s would just offer you a bit more diffusion and a bit more can space.

 

[wolfJflywheel]

I've done a few dabs out of my fc-1000

Almost exploded my lungs from the volume of it, but it was smooth

I think I've only used my FC-1000 for dabs since I got it. It seems to be the perfect rig for my enail setup.
I've only dabbed out of another piece once since I got it, which was really just as a tribute to my old go to dab rig which hasn't been seeing any action lately.

My position on just about every piece of glass:
If in doubt, make it a bit bigger.
(Including the FTK - id LOVE one that's like double the size of the prototype in the vid...)

I'd definitely be into 2 FTK sizes like with the torus. I'd probably into it enough to get both.

 

[Frederick McGuire]

I think I've only used my FC-1000 for dabs since I got it. It seems to be the perfect rig for my enail setup.
I've only dabbed out of another piece once since I got it, which was really just as a tribute to my old go to dab rig which hasn't been seeing any action lately.



I'd definitely be into 2 FTK sizes like with the torus. I'd probably into it enough to get both.

Haha, I was doing rather large relatively low temp dabs, so it took a lot of lung power to get it all.
Plus I was using a regular torch nail...
Everything about my setup was asking for more and more lung power

I'm sure it would be pretty badass with an enail

 

[tepictoton]

Just ordered a faberge egg from seller gorgeous_heroine and a ball rig from seller RooR.

Went for the faberge egg offered by this seller because it seems to have a matrix perc at the buttom, and he offers free shipping to Europe.

Went for the roor seller because again he offers free shipping to Europe.

Both seem to have their own genuine pictures of the products offered and reviews are positive.

If anybody has some experience with one of these sellers please share your experience with us. I will let you all know in about one month how it all ended up, because shipping will take forever for sure But at those prices...one can get a lot of popcorn for the euros saved this way hihi

Edit: had the FC-Mod in my cart for a long time, but will awaith first reviews and probably will feel safer ordering it if it gets a support on the mouthpiece joint...

 

[Cannabis Connoisseur]

@Frederick McGuire i think a survey will show a majority would probably prefer a larger FTK. I don't know who's the project manager on that piece,but it'd be great to make that change. To many mini pieces already. The FTK should be 13 inches the mouthpiece with a 18mm female FUCK IT I'LL BUY 2 OF THOSE!!!

 

[Frederick McGuire]

@Frederick McGuire i think a survey will show a majority would probably prefer a larger FTK. I don't know who's the project manager on that piece,but it'd be great to make that change. To many mini pieces already. The FTK should be 13 inches the mouthpiece with a 18mm female FUCK IT I'LL BUY 2 OF THOSE!!!

OMG a 13 inch version would be fukken awesome!!!

I just know a lot of peeps here on FC (and just in general) seem to prefer smaller and smaller rigs, so I didn't want to push too hard

 

[Cannabis Connoisseur]

OMG a 13 inch version would be fukken awesome!!!

I just know a lot of peeps here on FC (and just in general) seem to prefer smaller and smaller rigs, so I didn't want to push too hard

Like I said lets do survey or a show of hands. Can we get at least 20 Sold?????


EDIT: I LOVE HOW THESE GUYS BOB IN UNISON

 

[Errly Kyler]

I'm looking for a nice mini tube in the 4-5" tall range, preferably with a 14mm joint (female ideally, but I know that's dreaming). These are the only couple I've found so far:

http://m.dhgate.com/product/new-mini-glass-pipes-circular-bong-ash-catcher/233277162.html#pd-019

I like that one, but I need to find it available as a single, not a lot of 20. And the extreme angle on the necks of some of those makes me nervous (I prefer just a slight bend).

Then there's this one:

http://m.dhgate.com/product/5-inch-mini-glass-bong-10mm-nail-mini-oil/203984565.html

Which I really like, but it's 10mm. Is there any type of 10mm domed set up that can hold a decent sized dab?

Please recommend any other mini tubes you can think of that fit the bill. Thanks!

Ps: sorry mods for the mobile links, but I was unable to get a non mobile URL on my phone.

 

[ataxian]

I'm no expert on glass I just have too much!
Do what feels right to you!
I use a D020 for my SOLO.

Just size the piece to fit your vaporizer!

 

[mrupton]

Any one have recommendations for an oil rig with that comes with a nail?



Thanks!

 

[Nugg]

Then there's this one:

http://m.dhgate.com/product/5-inch-mini-glass-bong-10mm-nail-mini-oil/203984565.html

Which I really like, but it's 10mm. Is there any type of 10mm domed set up that can hold a decent sized dab?

I have this little beaker and I love it. Makes a good travel rig as well.

I use mine with a 90 degree banger because I lean the piece back when im using it. That way the slits in the stem are better covered by the water and the banger sits level.

If you are looking for a domed set up I find the flux nails work well. They have a good sized cup to hold a decent dab.

 

[deltr0n]

I'm looking for a nice mini tube in the 4-5" tall range, preferably with a 14mm joint (female ideally, but I know that's dreaming). These are the only couple I've found so far:

http://m.dhgate.com/product/new-mini-glass-pipes-circular-bong-ash-catcher/233277162.html#pd-019

I like that one, but I need to find it available as a single, not a lot of 20. And the extreme angle on the necks of some of those makes me nervous (I prefer just a slight bend).

Then there's this one:

http://m.dhgate.com/product/5-inch-mini-glass-bong-10mm-nail-mini-oil/203984565.html

Which I really like, but it's 10mm. Is there any type of 10mm domed set up that can hold a decent sized dab?

Please recommend any other mini tubes you can think of that fit the bill. Thanks!

Ps: sorry mods for the mobile links, but I was unable to get a non mobile URL on my phone.

I have a 10mm rig about the same size, and I use a 3mm Quartz banger from hymanquartz01, plenty of room for big fat dabs and the 3mm ensures it has lots of thermal energy capacity.

 

[blazedd]

are bangers and nails actually chill from dhgate?
always kept hearing to steer away from those accessories on dhgate because of toxic poison and not true t1 or t2 grade quality.. not sure. but actually do need a new banger, my current one is getting a funky taste and now im wondering if this one was china made or not. how about quartz from china?

 

[weenstoned]

Unless you paid $100+ your banger it is likely Chinese. Quartz is pretty inexpensive to manufacture so they're probably real quartz. I think most titanium is probably fine too, but quartz seems like a safer bet. Have made a few order from Hyman Quartz and they have pretty good customer service. http://www.dhgate.com/store/19928813#st-navigation-storehome

 

[Errly Kyler]

I have this little beaker and I love it. Makes a good travel rig as well.

I use mine with a 90 degree banger because I lean the piece back when im using it. That way the slits in the stem are better covered by the water and the banger sits level.

If you are looking for a domed set up I find the flux nails work well. They have a good sized cup to hold a decent dab.

Thanks for the info man! I pictured using it with a 90 degree banger and leaned back just like you describe. Guess this tube and a 4mm thick 10mm banger from jlhsmoking will be my next purchases. Just trying to make myself wait to order until after my ccg egg shows up. The struggle is real.

 

[u bwade wunner]

Haha looks like we have perc options now for the FC MOD

http://www.dhgate.com/product/2015-new-34-5cm-height-glass-bong-with-matrix/255741536.html


hope to get both Matrix and showerhead percs x 2 with this piece and have some fun....would be good to see more percs as accessories

Do folks here still want extra perc options for the FC-MOD? Or are the matrix and showerhead enough?..specifically what percs for the main chambers would work?

Reti?.......Maybe a nice tree....or a 5 hole concentrate perc would work maybe.

 

[Cannabis Connoisseur]

Haha looks like we have perc options now for the FC MOD

http://www.dhgate.com/product/2015-new-34-5cm-height-glass-bong-with-matrix/255741536.html


hope to get both Matrix and showerhead percs x 2 with this piece and have some fun....would be good to see more percs as accessories

Do folks here still want extra perc options for the FC-MOD? Or are the matrix and showerhead enough?..specifically what percs for the main chambers would work?

Reti?.......Maybe a nice tree....or a 5 hole concentrate perc would work maybe....

Diffusion Pump Perc!
Edit: I wish that would've been an option when i ordered. I'd have ordered two showerheads. And Steve should also sale the percs individually

 

[u bwade wunner]

Diffusion Pump Perc!
Edit: I wish that would've been an option when i ordered. I'd have ordered two showerheads. And Steve should also sale the percs individually

Can You elaborate? A Rough sketch maybe with good function??
I think the top joint is 29mm ,so long as it has room and slides in. Golden.

 

[Cannabis Connoisseur]

Can You elaborate? A Rough sketch maybe with good function??
I think the top joint is 29mm ,so long as it has room and slides in. Golden.

This is a Diffusion Pump Perc

 

[Smokey the Bearington]

FC,

After reading countless amounts of pages and stalking this thread daily I think I am finally ready to make a purchase.

From what I read, it seems as though cnmengglass have the best Fab Egg? Specifically this one: http://www.dhgate.com/store/product/two-functions-2015-new-glass-faberge-egg/237527726.html#ctabBox

If anyone can recommend a quality beaker bong that would also be appreciated. Have been wanting one for a while.

 

[u bwade wunner]

matrix and showerhead down stems for the FC-MOD will be available as accessories from tomorrow.if someone can post a functional mock up of a pump downstem either here or to Steven,im sure he'd make one to fit.

I'm being told a bent circ mouthpiece will be made soon too.lets hope Steven nails it first time.

Diffusion Pump Perc!
Edit: I wish that would've been an option when i ordered. I'd have ordered two showerheads. And Steve should also sale the percs individually

 

[subway13029]

My fc mod has landed in the u.s. as of yesterday..it says new york..so i should have in few days and i aldo bought the red inline from joda..wonder which one gets here first..i also asked jane about downstem options and was told same as above that will be available tomorrow..and i asked about mouthpieces and hydratubes so we shall see asni am awaiting reply..

 

[Cjisohsocool]

Is Steven still coming out with the smaller straight fab?

 

[Stu]

I got my FC-mod today which surprised me quite a bit. Most of my Chinese glass purchases take 3-4 weeks, but I got this in only 8 days. Pretty, pretty good.

First thing that struck me was how small it is compared to the OG Devastator. It's basically a mini-devastator.

Here's some pics:

I shot a video of the first hit, but YouTube is being bitchy at the moment. The build is decent if not perfect. The mouthpiece joint doesn't need any further support IMO. Diffusion in definitely on point.

I think I'm gonna name him Max.

 

[Quetzalcoatl]

too close to the edge, @Stu.... you know what goes down around these parts!