Cheap High Quality Bubbler

Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
Anyone see Kathy's new pieces?

710-oil-rig-new-come-glass-bong-recycler.jpg



Looks like he damn near get's a drink mid-pull :rofl:
 
gigaurora

gigaurora

Well-Known Member
Hey guys, So i'm planning on getting a torus (stevens), was waiting for the 2nd version slit perc of his to be selling, but since i've come back i see some other are now doing torus's as well.

Anyone recommend which one is "best" for someone running theirs with an 18.8 (cloud EVO) in relation to size, function, and cost?

I will in return send positive thoughts to any lovely lad or lass that lends some knowledge.
 
gigaurora,
  • Like
Reactions: East808
wildything

wildything

Well-Known Member
ragnorokk said:
That thing looks and functions like garbage. It seems like he can barely pull at all or he's getting a drink. I guess maybe the water level is to blame, but water level can't cure what an ugly monstrosity that thing is.
Click to expand...
Liquidglassarts has been releasing some pieces with those "lattice" percs. But I believe they are made of many Jesus welds so this is a very skillfully made perc design. THAT being said I still think it's a pretty bad design overall. They should definately make a better recycler funnel because it looks like it is not able to recycle the full flow of water when ir first starts going and that is why you see water going up the mouthpiece. It has a lot of potential imo just not there yet.
 
wildything,
ragnorokk

ragnorokk

DERP
Frederick McGuire said:
:hmm:
That's a tree not an inline...

I'm not quite sure I understand you...

So you want a design where it's basically the D022, but without the little tumor perc, instead switching that perc to being an ash catcher?

That's basically describing the devastator then, which I have been working on a design with Steven.
Click to expand...
I actually just mean the way it exists on the d022, but with GonG connectors at both ends to make [the center unit] removable. The pic I supplied was just to illustrate that I mean it should attach via GonG joint on both ends.

So it would be modular (with the already genius removable main downstem) and you could add secondary percs as you see fit, or just skip them.

cybrguy said:
That was a lot of water at about 3 sec. I don't think that was "damn near"... ;)
Click to expand...
Lol, yeah -- looked to me like he had a nice sip.

wildything said:
Liquidglassarts has been releasing some pieces with those "lattice" percs. But I believe they are made of many Jesus welds so this is a very skillfully made perc design. THAT being said I still think it's a pretty bad design overall. They should definately make a better recycler funnel because it looks like it is not able to recycle the full flow of water when ir first starts going and that is why you see water going up the mouthpiece. It has a lot of potential imo just not there yet.
Click to expand...
I'm not saying they aren't skilled, I'm saying this looks like it's barely functional (if at all), and that while it's interesting conceptually, it's not pretty. There's probably a version of this style that I would like, or at least be neutral about, but this particular example is not it.
 
Last edited:
ragnorokk,
Zufi Raj

Zufi Raj

Master Zufi
Aaargh -The FC 1000 broke. First time I was cleaning it - it snapped at the neck!!

The only thing about the design that I was concerned about - Its weak point. I have sent Steven a Picture and will see what he says.

What a disappointment - I was enjoying it till then!


 
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
I bought this D022 Bubbler that I was going to use with my Enano. I thought I was getting the 18mm for a GonG attachment. I have the 18mm GonG for the Enano and as soon as I unboxed it I could tell the opening was way to big. I don't know a lot about Water Tools as I only have a couple other pieces.

I need some FCer to advise me. Help @ataxian if you are out there in FC land right now.
 
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
CarolKing said:
I bought this D022 Bubbler that I was going to use with my Enano. I thought I was getting the 18mm for a GonG attachment. I have the 18mm GonG for the Enano and as soon as I unboxed it I could tell the opening was way to big. I don't know a lot about Water Tools as I only have a couple other pieces.

I need some FCer to advise me. Help @ataxian if you are out there in FC land right now.
Click to expand...

The D022 has a removable downstem - that long glass stem goes into the large opening. Your GonG goes into the top of that long stem
 
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
I don't know what I would do without all you guys helping me out all the time. They need to put directions with the watertools for us uneducated folks. I guess I should have watched some videos of it. I didn't realize that the long piece fit inside.

Just tried it without water - awesome. Thanks @Ratchett
 
Last edited:
ataxian

ataxian

PALE BLUE DOT
CarolKing said:
I bought this D022 Bubbler that I was going to use with my Enano. I thought I was getting the 18mm for a GonG attachment. I have the 18mm GonG for the Enano and as soon as I unboxed it I could tell the opening was way to big. I don't know a lot about Water Tools as I only have a couple other pieces.

I need some FCer to advise me. Help @ataxian if you are out there in FC land right now.
Click to expand...
Just put on your bed clothes before you test ìt!
fill the water to the top of the slits on the perk and adjust from there!
 
digigator

digigator

Well-Known Member
There's a chance the mailman is bringing this today:
http://www.dhgate.com/product/bong-glass-recycler-2015-new-glass-bong-oil/240342920.html#ctabBox

Will post some impressions on this, I'm weary of this new Kathy0578 but she's the only one who has this very interesting design.

I've got a couple of questions. What happened to Steven's new Mobius Binary and Ball Rig? Those looked good. But I don't see them in the store.

Also, who makes the thickest, headiest dry hand pipes on DHGate? Most of the stuff I see are kind of thin. I uhh, have a friend, who likes to combust from time to time...:cool:

Edit:
I started searching and I had to share this:
http://www.dhgate.com/store/product/manufacturer-wholesale-double-bowl-rt-135/229001522.html

When lighting just one bowl isn't harsh enough, let's put another bowl even closer to the MP! :huh::shrug::rofl:
 
Last edited:
ataxian

ataxian

PALE BLUE DOT
digigator said:
There's a chance the mailman is bringing this today:
http://www.dhgate.com/product/bong-glass-recycler-2015-new-glass-bong-oil/240342920.html#ctabBox

Will post some impressions on this, I'm weary of this new Kathy0578 but she's the only one who has this very interesting design.

I've got a couple of questions. What happened to Steven's new Mobius Binary and Ball Rig? Those looked good. But I don't see them in the store.

Also, who makes the thickest, headiest dry hand pipes on DHGate? Most of the stuff I see are kind of thin. I uhh, have a friend, who likes to combust from time to time...:cool:
Click to expand...
I had a good experience with my kathy 057 bubblers I use for my SOLO and VAP2.
The D series from sunshine store have been great.
The FC186, FC187, FCUFO are larger in volume.
I use a NANO for more volume!
 
digigator

digigator

Well-Known Member
ataxian said:
I had a good experience with my kathy 057 bubblers I use for my SOLO and VAP2.
The D series from sunshine store have been great.
The FC186, FC187, FCUFO are larger in volume.
I use a NANO for more volume!
Click to expand...

Was it Kathy0577 or Kathy0578? As another user noted, they are 2 different people, and 0578 is not affiliated with DK Globe as 0577 is. I've had pieces from 0577 before with no issues, but I'm worried when the formula for choosing a user name is establishedSellerID++
 
You must log in or register to reply here.
Top Bottom