Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
vjt324
Well-Known Member
Okay so I've been out of the glass game since I got the 710, and the dcycler.
I had to stay away from the glass thread as I bought way too many pieces in a very short time, my wife wanted to kill me.
Now my friends, I believe it's time to indulge once again. Although not sure on what.
I've mostly been dabbing concentrates thru the 710. Very hard to de-throne since I've gotten it.
What are the go-to pieces within the last month or two. I know I saw Stevens straight fab lookin sharp. And on that note WOW!!! Look at the progress they've made, banging out fab stuff like nothing lol.
I had to stay away from the glass thread as I bought way too many pieces in a very short time, my wife wanted to kill me.
Now my friends, I believe it's time to indulge once again. Although not sure on what.
I've mostly been dabbing concentrates thru the 710. Very hard to de-throne since I've gotten it.
What are the go-to pieces within the last month or two. I know I saw Stevens straight fab lookin sharp. And on that note WOW!!! Look at the progress they've made, banging out fab stuff like nothing lol.
amberevil
Well-Known Member
So Im about to get my first flower vaporizer, the extreme q, and I wanted to know if you guys think the 710 diffusion pump would be a good bong to attach to it? Also what attachments would I need to set that up?
I have a 710 whip and will likely be using it on that too but I really want herb vaporizer hucked up through a water tool.
I have a 710 whip and will likely be using it on that too but I really want herb vaporizer hucked up through a water tool.
NickDlow
Log Hog
IMO I don't like the 710 for flowers, not that it does anything wrong. I just like the filling and clearing of a can when vaping flowers.
I personally like my 711 and UFO for flowers atm. The fab is great too though I'm breaking it in. There's just way to many lol.
vjt324
Well-Known Member
I have both an extreme q and the 710.
That being said, I personally wouldn't use the 710 for any flower vape. I feel it doesn't have anywhere near the volume I look for in my flower vape pieces. On the other hand u do have a 710 whip and that would probably work phenomenally.
Edit:
711?!?
Ufo?!?!
Linksssssss plzzzzzz
The EQ comes with all you need out of the box (2 glass 18.8mm elbows), so you can hit the ground running with any 18.8mm female GonG water toy.
063_XOBX
Ganjapreneur
grokit
well-worn member
For me, I've been chomping at the bit for an egg (as you mentioned), and the ufo
turdhole
vagabond
FC-Cake has arrived.
The flower bowl it came with is retarded, way too deep...shit, forgot you guys are vapers.
anyway, feels nice and sturdy, thicker than i expected. i wish it was a little bit taller so i could pull a bit harder without getting water in the mouthpiece. overall i'd say it's worth the just under $40 i paid for it.
The flower bowl it came with is retarded, way too deep...shit, forgot you guys are vapers.
anyway, feels nice and sturdy, thicker than i expected. i wish it was a little bit taller so i could pull a bit harder without getting water in the mouthpiece. overall i'd say it's worth the just under $40 i paid for it.
Any one have the newer full size pillar ? I think its called the fc 1000...
Ive been feeling the fc 711 latley and was thinking about getting the full size one since im about to order the torus. Im sure some folks have already posted about it but I must have missed it.
Ive been feeling the fc 711 latley and was thinking about getting the full size one since im about to order the torus. Im sure some folks have already posted about it but I must have missed it.
demonscars
Well-Known Member
I love the 711 so much. It's my daily driver for sure. Such a great all around piece.
flotntoke
thoroughly vaped
Know it has fallen from the favorites list in this thread lately, but IMO it's hard to beat the good ole GB187 for vaping flowers. Any of the sidecar versions (FC 187s etc) or the UFO V2 that's out now would probably be good, too. Think you'll enjoy larger chamber and less diffusion. You'll retain more flavor and be able to see/feel the differences of different temps more.
All those funky percs and the bubbles they produce do look really cool. But for me, I'd rather be closer and more in tune to the vapor and leave the big bubble stacking and intricate water paths to smokers. Also, a hell of a lot easier to keep clean or deep clean as necessary if you don't have a maze of glass inside.
glitchsta
Member
Actually I think the SL15002 I ordered has something wrong with it...I think the hole/tube going into the center of the showerhead is clogged with glass or not made big enough...Check out his video at
Notice above the showerhead its like shooting bubbles of water straight throuugh the middle, my showerhead shoots a stream of water like out of a hose...also my showerhead wont drain back down...drip by drip it goes... Here are a couple videos I made to show Steven...What am I doing wrong!?!? I am kinda new to these, could be my fault...
Seems like the more water I add as he suggested makes it almost impossible to pull air through...the drag is tremendous heh...i swear that hole above showerhead is a pinhole....please help!
Notice above the showerhead its like shooting bubbles of water straight throuugh the middle, my showerhead shoots a stream of water like out of a hose...also my showerhead wont drain back down...drip by drip it goes... Here are a couple videos I made to show Steven...What am I doing wrong!?!? I am kinda new to these, could be my fault...
Seems like the more water I add as he suggested makes it almost impossible to pull air through...the drag is tremendous heh...i swear that hole above showerhead is a pinhole....please help!
BoogerMan
Well-Known Member
Try pulling slower and not as hard. Seems like you are pulling super hard, which I think is causing the stream in yours vs the bubbles in Stevens. Yours actually does bubble like Stevens after you hit it for a few seconds. I think you might just be pulling too hard and too fast initially.
Start with the lowest possible water level needed to get each perc to bubble (you may have to add some water through the mouthpiece so that the tree perc has water up there). Then increase the water a little at a time until your liking. This will help get minimal drag (however inverted percs will almost always have drag).
In Stevens video, it doesn't look like the water drains back down either... Maybe I'm not understanding? A lot of inverted percs that require fairly high water levels won't drain down all the way because the pressure of the water in the very bottom of the piece acts as an opposing force to the water trying to drain down.
Inverted percs, like on this piece, will always have a heavy drag to get it started and then it will smooth out a little but will mostly be chuggy compared to many other percs.
If reading this doesn't solve the problem then either the hole you are talking about is truly too small or the piece is just not designed very well or made very well (happens a lot with China pieces).
Last edited:
glitchsta
Member
ya i am sucking hard because it is hard to even get it to do anything...this girl that was over last night couldnt even get it to bubble...the only time it hits nearly close to a normal piece would is if there is just enough water to go underneith the fritted disc and no water on showerhead...when all 3 of water it is super hard to get it to chug.....i dont know hopefully he takes it back...an exchange would be nice...I did not know inverted percs like that would cause more drag....seems like alot of chinese pieces it is hard to get enough water to cover all percs and get none in your mouth....they need to make them taller or something...splash guards would be nice =p Well I will try more water and see...but I do not like thats for sure...some cant even hitt it lol, also got a piece from steven today that was 14mm female so I needed a 14mm male bowl...it came with 18mm bowl lol, maybe stevens crew has figured out what these things are made for =p
i hope this is not the fate of mine, should be here any day now.For some reason I uploaded to imgur.com but when I insert the same pic in a message to steven it doesnt work for some reason , can anyone help me out?
Has anyone seen these? are they likely to have been sprayed as well?
MileHighLife
Blower of glass, grower of grass
Could it be the fritted disc? I bought a fritted dhgate piece like a year and a half ago and the frit was too fine making the holes through the disc super tiny. It was almost impossible to even hit the thing even dry. They had a bunch of complaints and fixed it and sent me a new one with really coarse frit and it worked great.
@flotntoke I agree whole heartedly! I just bought an egg and while it is really cool looking i feel that the flavor is diminished and it's a pain to clean the downstem ... I can't even imagine cleaning some of the crazy percs out there.
The mf orbiter is still my favorite "cheap, high quality bubbler"
Followed closely by a micro recycler I bought on dhgate.
Last edited:
polvoman
Active Member
Been working on this design with Steven, its basically a Vapexhale devastator knockoff. I am dissapointed that he made the video readily available as was trying to get it finished first!
Now that its out in the open any suggestions would be welcomed, already trying to get a few different mouthpiece options (sherlock style, trumpet and traditional) and downstems (matrix, ufo, griddled) and the main downstem lower in the can.
Glad that its been received well so far though
Been Vapin
Fringe Class
Been working on this design with Steven, its basically a Vapexhale devastator knockoff. I am dissapointed that he made the video readily available as was trying to get it finished first!
Now that its out in the open any suggestions would be welcomed, already trying to get a few different mouthpiece options (sherlock style, trumpet and traditional) and downstems (matrix, ufo, griddled) and the main downstem lower in the can.
Glad that its been received well so far though
Reminds me of the Toro 6 in 1 design from 2009.
glitchsta
Member
Thanks for the tips I think I needed em...I did add more water and I think your right I was pulling to hard initially...the trick is to slowly pull to get it going...I did not even know about those techniques yet lol...It is a little better but way to much drag for my liking...more drag than any piece I have ever hit. Also the hole coming up from the showerhead seems to be like 1/8" big by watching the bubbles...that seems a little small for me...Steven is working with me to figure it out...maybe its just a poor design...next time I will purchase one with a little more simpler design...the piece is def high quality just doesnt pull right...tons of drag =\ guess I shoulda done more research....guesss you get what you pay for....+ a little bit more from china =p
polvoman
Active Member
Reminds me of the Toro 6 in 1 design from 2009.
Your image reminds me just how much I miss Always Sunny!
Nice! I've always wanted a modular setup (similar to Stax by Grav Labs but in a bubbler setup) and am hoping that with a few additions you can create a bespoke setup that actually differs dependant on the combination you use.