Cheap High Quality Bubbler

LongIslandmom

Well-Known Member
I received this picture last night and a message saying that it would be about 7 days until production!!!!!!!!!

other_947666863_00.jpg


Edit: I just sent a message lecturing on using only clear glass and no counterfeit labels on anything. We might finally be getting what we have been waiting for
Who is the vendor here
 
LongIslandmom,

Stu

Maconheiro
Staff member
I'm planning on using SG to rid my 187 of it's label as well. I've heard it works well, so I'm going to give it a go whenever I can remember to pick up some Simple Green from the store. Does it need to be full strength or can it be diluted?

:peace:
So I finally picked up some Simple Green for "project label removal" and after letting my GB-187 soak all night, I took it out and was disappointed to see the "RooR" label to be fully intact. :(

I took a paper towel to the label anyway, and was glad to see the label wiped away with one simple swipe of a Brawny. :clap:

Before (on the left)
3Uts3GY.jpg


After
LSZHFVW.jpg


Edit: Comparing the above pictures, it seems that my label removal project has changed the color of my Evo. WTF? :hmm:

:peace:
 
Last edited:

Delta3DStudios

Well-Known Member
Accessory Maker
So I finally picked up some Simple Green for "project label removal" and after letting my GB-187 soak all night, I took it out and was disappointed to see the "RooR" label to be fully intact. :(

I took a paper towel to the label anyway, and was glad to see the label wiped away with one simple swipe of a Brawny. :clap:

Before and after shots:
3Uts3GY.jpg

LSZHFVW.jpg


:peace:


What simple green did you use - the regular or the concentrated version? I'm fairly certain you need the high concentrated version to remove the label

(I haven't tried this trick yet, none of my glass has logos on them)
 
Delta3DStudios,

Stu

Maconheiro
Staff member
What simple green did you use - the regular or the concentrated version? I'm fairly certain you need the high concentrated version to remove the label

(I haven't tried this trick yet, none of my glass has logos on them)
I used the concentrated version. In case my post wasn't clear, it worked perfectly and removed the label entirely. It just needed a swipe of a paper towel to finish the job. ;)

:peace:
 

Frederick McGuire

Aggressively Loungey
That piece looks cool - I just wish it was about $8 cheaper...

I know it's a very small amount, but just about anything under $40 I have a hard time not throwing my money at, anything over $40 moves it from impulse-buy to ever-so-slightly-considered-buy :lol:

EDIT:

OK, What the hell?
I usually do a sweep of a few of my favourite sellers every week or so (SSS, Kathy, Alina, Yingmin, Steven & CCG - though I now only look at CCG for pieces I hope one of the other sellers will stock too - Refuse to do any more business with them).
I go to their store page, and sort the products by recently listed.

I don't recall ever seeing the piece @Cannabis Connoisseur posted, but it's got some reviews going back a month, and isn't at the top of the recently listed page...
Did I miss it a while back or something?
I'm quite confused :hmm:

EDIT: Part 2:
I received this picture last night and a message saying that it would be about 7 days until production!!!!!!!!!

other_947666863_00.jpg


Edit: I just sent a message lecturing on using only clear glass and no counterfeit labels on anything. We might finally be getting what we have been waiting for

Fuck yeah :rockon:

Sidecar ion clone is finally happening (I wonder why it was so hard for all of us to make it happen? they already make the required parts for other pieces...)

Anyone else encountered this error when trying to purchase from SSS?
other_947811549_00.jpg
 
Last edited:

tennstrong

Well-Known Member
Last edited:
tennstrong,

Frederick McGuire

Aggressively Loungey
I've already asked for a function vid :D

---------------------

It seems CCG have made a Barrel-Babycake Recycler
http://www.dhgate.com/store/product/9-5-inch-24cm-baby-cake-recycler-glass-vapor/214047224.html
Free%20shipping%209.5%20inch%2024cm%20Baby%20Cake%20Recycler%20Glass%20Vapor%20Rigs%20Oil%20rig%20Glass%20smoking%20rigs%20water%20pipes%20with%2014.5mm%20joint%20glass%20dome%20and%20nail.jpg


----------------------------
Anyone know why this new piece is so expensive?
http://www.dhgate.com/store/product/color-sandblasted-glass-bong-18-inch/213430709.html
color%20sandblasted%20glass%20bong%2018%20inch.jpg


I know it's got color, and sandblasting, but $70 seems a bit steep compared to all the other stuff. :shrug:
 

tennstrong

Well-Known Member
Damn Kathy. Had to pull the trigger on this little Toro-looking recycler. Thanks for the link @tennstrong . I really needed another piece. (Insert sarcasm here).
I messaged asking her to keep the dome, nail, and bowl. And send me a dish instead. We will see what I get.
zoz7kBG.jpg
Glad I could help you find your much needed piece. Awaiting your watertest of it as well! Looks good + not too much to fuck up on the blowers side, seems like a solid piece, only concern is if vapor will go up the down funnel (or whatever you call it from the recycler chamber), however time will tell I guess, but you can't go wrong with a inline downstem IMO! Always one of my favorite percs time and time again.
Edit: most vendors also seem to have percs placed higher than in the original picture from most of my viewed members' collective experience, which would improve on it even more.
 
So...for folks wanting an 18mm hydrotube, the nectar/honey straw is now available in 18mm:
14mm%20or%2018mm%20Honey%20Straw%20Nectar%20Collector%20Kit%20with%20Titanium%20Nail%20Concentrate%20Pipe%20for%20Oil%20rigs%20and%20Dabs%20Mini%20Glass%20Bongs%20Smooth%20hit%20Bubbler.jpg

http://www.dhgate.com/product/14mm-...r-collector/214191697.html#s7-20-1|3972938615

and they also have a new 14mm version, the 2.0:
Nectar%20Collector%202.0%20Concentrate%20Pipe%20with%20GR%202%20Titanium%20Nail%20Glass%20Water%20Pipe%20Mini%20Glass%20bong%20for%20Oil%20Rigs%20and%20Dabs%20Free%20shipping.jpg

http://www.dhgate.com/store/product/nectar-collector-2-0-concentrate-pipe-with/214158549.html
I wonder if that is a stock pic or an actual production piece. It looks a lot more like the real Nectar Collector and I really like that look. I like how the Chinese are incorporating a lot more color glass and some pieces that are heady and "almost" resemble some of the cheaper American glass.
 
ConstanlyConcentrated,

Delta3DStudios

Well-Known Member
Accessory Maker
Damn Kathy. Had to pull the trigger on this little Toro-looking recycler. Thanks for the link @tennstrong . I really needed another piece. (Insert sarcasm here).
I messaged asking her to keep the dome, nail, and bowl. And send me a dish instead. We will see what I get.
zoz7kBG.jpg


I don't think that will recycle and vortex properly because the perc is below the recycler tube....
 
Top Bottom