Cheap High Quality Bubbler

[sasNW]

I picked up a second 135mm wigwag from CCGlass. In some ways I like it more than the first one, in some ways not as much.

You can see at the base where the wigwag got away and crept up the side a little.

But it's all made up for on the reverse side of the knob. Hey @sasNW meet the poor man's version of your worked black-and-white recycler..

Edit: I read somewhere that instead of worked glass, the colors in the cheaper pieces are made from glass-encased pigment . Does anyone know if that's true, and if so, how to tell the difference?

Sick! Love the rasta mixing with the black and white. Believe me I'll be buying "poor man" versions of all glass for a long while due to that damn recycler haha

 

[flotntoke]

Edit:
@flotntoke any chance you could post a pic of your d020-w widened mouthpiece?
Did it help with the drag of the piece, or is that being determined by the perc?

It did help with the drag a good bit. Unfortunately IMO, helped much more with the drag than the cleaning/emptying time. I didn't mind the drag much. Now? No drag issue at all for me.

EDIT: Sorry @Tweak ... missed your post above. Agree with all except the guts part. Wasn't that bad and hands were only shaking after for 1/2 hour!

@FUnhouse , that's the bitch... getting the water out while rinsing. Cleaning is no problem. If you clean your glass regularly with ant type of solvent (mostly ISO here) you're not going to get much buildup in there. Certainly nothing a pipecleaner won't get out. But, the small mouthpiece opening takes forever to let all the water out while rinsing! Opening it up did help some, but not as much as I hoped. Sorry no pic, yet. Busy week!

Going to give the other one a go this week. Will take before and after shots. It was always the worse of the two, so going to be glad to get at least a little better flow - hopefully a lot!

If not for this, the D020-W would be the best thing going in this thread IMO. I keep thinking about opening it all the way up. Maybe cut it right across the middle of the damned penis head, then flare out the piece that's left. With enough heat (probably propane instead of butane) I bet you could flare it out trumpet style. Anyone know the easiest/safest way to cut borosilicate?

I'd gladly pay another $10 for one that was already like this. Are you checking in Yingmin? Kathy? Mike? Yes!!! $10 USD more without thinking twice, maybe $20. I'd even talk the thing up, buy in lots of 10 and resell, pay shipping (er... maybe) - damned near anything for you to create a piece that requires less work, uses less glass and doesn't look like a dick that you have your customers stick in their mouths! So classier, cheaper & quicker to produce, cheaper to ship, happier customers who will tell others about it AND I'll happily pay you 50% more before s&h!

 

[Gray Area]

I'm really hoping yingmin comes through and makes a sidecar ion clone.
I really liked it with the standard bubbler mouthpiece, but since I've got a matrix ion, I'd never really use it so I sold it to a mate.
If there was a sidecar one I'd be on that like a fat kid on a cupcake

Now I would love a sidecar mobius clone. Have had my eye on the D020 --2-W for a little while now, but the male joint and blue disks have been putting me off... All clear and female joint it would be a pretty nice piece...

 

[Frederick McGuire]

Do you have the strain PINEAPPLE KUSH?

I need to clean however maybe tomorrow? I use PBW as well!

Sadly no
Though I do have my hands on some nice THC Bomb and Mango Dream at the moment


@flotntoke,
I've used a dremmel to cut notches in a solo stem before - but it was slow, and when I tried it on a 2nd stem, I broke it...

I think the ideal tool is some kind of diamond tipped blade?

 

[Herr_Dampf]

Sadly no
Though I do have my hands on some nice THC Bomb and Mango Drea at the moment


@flotntoke,
I've used a dremmel to cut notches in a solo stem before - but it was slow, and when I tried it on a 2nd stem, I broke it...

I think the ideal tool is some kind of diamond tipped blade?

Water cooled diamond bandsaw will be your safest bet I guess.

A butane only torch is too cool to propperly work boro, also, without a kiln chances are pretty high it will crack while cooling. I tried to repair a broken boro dabber tip with my butane hot head (the heat was just enough to polish the tip, the rest of the dabber was pretty much unimpressed by the flame) and due to lack of kiln, chilled it in the sand I use to chill my beads in (soda-lime glass). In the morning the whole tip had come off.
Just the of a glass noob though.

 

[Jahrastafari]

Heres a Cheap Vape pen Bubbler that seem works well with flowers but better with oils. (comes with atomizer for both). Looks cool too lol. Heres a water test I found.
http://www.ebay.com/itm/171402714849?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

 

[Gray Area]

That plug of tobacco he pulled out after "vaping" it was black and covered in ash...

 

[Jahrastafari]

like i said works better with oils....

 

[Frederick McGuire]

like i said works better with oils....

FTFY

 

[DieHard]

Do you have the strain PINEAPPLE KUSH?

I need to clean however maybe tomorrow? I use PBW as well!

Just got a sack of Pineapple Kush. Tried some in the SoLO. Will be making some shatter this weekend.
Do you like it?

...uhh, topic... Uh. Oh yeah. If you check on @yingmin5 he was "last seen" a week ago. But still an unapproved commercial account. He probably won't get approved because of the bootleg logos on his pieces. I think he's watching though...

 

[Delta3DStudios]

I feel the same about the mouthpiece and the joint.
I'm now leaning toward the d20-w. So I don't need an adapter and get a bit more flavor with less diffusion. And just hve to deal with the mouthpiece. It it that bad?

Get the D020-W - yes the mouthpiece isn't the best, but I don't HATE using it, I just hate how it looks. Function wise it's a great piece. Skip the D020--2-w - the top turbine perc is more of a splashguard than anything else.

ATTENTION ANYONE CONSIDERING THE BLUE LIP D020-W-2, it has a completely different mouthpiece than the clear version. The clear version is very comfortable like stated in the post above. The blue lip version is not near as good IMHO

Heh, interesting. Didn't realize they were different, yeah the D020--2-w in blue does have a strange mouthpiece, but I still like it more than the shape of the D020--2-w piece. Especially at cleaning time when I need to empty the water

 

[gibson]

I've been away for a month so I fear I have missed out on a lot, would anybody mind catching me up on anything cool/big going on?

I was seeing what changed with Kathy, thought this included a knock off PVHES water adapter at first! If only..

 

[blankrider]

Why skip the D020-2-W?!
The top turbine is more of a splash guard than anything else?

I think that the D020-2-W is one of the best options!

The constriction is solid, the honeycomb functions really well, the turbine functions AMAZING, and the sidecar mouthpiece keeps your vape out of your face while giving you a good view of the action.

Put the water level a hair above the honeycomb and on the clear really give it a good rip. The slits in the turbine are cleverly angled so the water spins the opposite direction of the mouthpiece. It is impossible to get any splash.

 

[Delta3DStudios]

I've been away for a month so I fear I have missed out on a lot, would anybody mind catching me up on anything cool/big going on?

I was seeing what changed with Kathy, thought this included a knock off PVHES water adapter at first! If only..

Nothing really new and exciting has changed. A few popular pieces like the GB-187 are out of stock currently. I've heard other people say the vendors have mentioned some new pieces coming soon (Yingmin5 and Sunshinestore)

For your reference, i have that tornado piece - bought it for the mouthpiece - thought it would create a cool vortex action like my old hurricane knockoff waterpipe from my combusting days. Sadly it was very disappointing. All the pieces are sitting in a box, waiting for me to use it or sell it someday...

 

[Tweak]

Why skip the D020-2-W?!

I would love to have another sidecar, but for me it's the DI joint.

I don't have any F - F adapters or Female bowls, so I would need another adapter (more $) or another nano GonG. With the extra adapter comes another piece of glass to break/lose/get dirty and it puts my vape up too high for my liking, causing the piece to become top heavy.

How are most of you using your DI joints for vaping? Should I just give in and buy the F/F adapter?

 

[SSVUN~YAH]

I've been away for a month so I fear I have missed out on a lot, would anybody mind catching me up on anything cool/big going on?

I was seeing what changed with Kathy, thought this included a knock off PVHES water adapter at first! If only..

Yes the NKOTB have been busy, Alina and CleanClearGlass links are posted all throughout last few pages...

I would love to have another sidecar, but for me it's the DI joint.

I don't have any F - F adapters or Female bowls, so I would need another adapter (more $) or another nano GonG. With the extra adapter comes another piece of glass to break/lose/get dirty and it puts my vape up too high for my liking, causing the piece to become top heavy.

How are most of you using your DI joints for vaping? Should I just give in and buy the F/F adapter?

I haven't had a problem with F/F for my DI's, sometimes they make it possible to attach a vape when there wasn't enough room due to the stem being too close to the can. I also prefer the dewar style for less drag, however I've created some really nice rigs with smaller stemless DI recyclers F/F adapter and hc ac! I've heard lots of people complain about DI but I don't understand it. Even though these pieces are cheap, I still use attachments on top of the DI as to not overheat and cool causing thermal shock when dabbing...

 

[Tweak]

I've heard lots of people complain about DI but I don't understand it.

I'm not complaining, . I think a DI joint looks quite sexy on some pieces. And I'm really wanting a recycler, seams like the only option is DI.

Just trying to keep everything one standard size for simplicity sake. I misplace my glass adapters all the time, so I don't need more to add to the mess, lol.

I keep eyeing this piece, I wish more vendors would include something in the photo for scale:

But it's only 14mm and DI, that would really screw up my OCD. Anyone have one of these yet ^?

 

[SSVUN~YAH]

I'm not complaining, . I think a DI joint looks quite sexy on some pieces. And I'm really wanting a recycler, seams like the only option is DI.

Just trying to keep everything one standard size for simplicity sake. I misplace my glass adapters all the time, so I don't need more to add to the mess, lol.

I keep eyeing this piece, I wish more vendors would include something in the photo for scale:

But it's only 14mm and DI, that would really screw up my OCD. Anyone have one of these yet ^?

Lol, not you! I have that piece, I take my infamous mouthpiece, attach 1" tubing to bottom of 14mm joint and it fits perfect in the mp of mine. Mine is almost 8" tall, 4.25" width, almost 3" diameter base, & just under 4.25" to top of DI...

Edit- some people on here have sourced recyclers and incyclers with female joints. I saw one with female and removable mp, either @rgrig or @blankrider or @PoopMachine may have better details. EFS can make you an amazing one, with detailed sandblasting if wanted.

Also, I prefer 18mm female and 14mm DI, I dont find the difference in taste, size of hit, etc but I do like the fact a reducer easily turns both into a different joint...

 

[Frederick McGuire]

The slits in the turbine are cleverly angled so the water spins the opposite direction of the mouthpiece. It is impossible to get any splash.

I noticed this too
I thought it was a nice touch.

...I don't have any F - F adapters or Female bowls, so I would need another adapter (more $) or another nano GonG....
How are most of you using your DI joints for vaping? Should I just give in and buy the F/F adapter?

F - F adapter all the way over here.
http://www.dhgate.com/store/product/18-8mm-to-18-8mm-female-glass-adapter-straight/197859794.html

But it's only 14mm and DI, that would really screw up my OCD. Anyone have one of these yet ^?

I've got one on the way now.
Along with this adapter to help with the joint size
http://www.dhgate.com/store/product/2pcs-lot-glass-water-pipe-glass-adapter-jiont/196104896.html

 

[SSVUN~YAH]

I noticed this too
I thought it was a nice touch.

F - F adapter all the way over here.
http://www.dhgate.com/store/product/18-8mm-to-18-8mm-female-glass-adapter-straight/197859794.html

I've got one on the way now.
Along with this adapter to help with the joint size
http://www.dhgate.com/store/product/2pcs-lot-glass-water-pipe-glass-adapter-jiont/196104896.html

Ah good, I've been waiting on someone to pull the trigger on Kathy's adapters. I really wonder about those reducers from China, though. Like @ou812? pointed out those sunshine adapters you linked are a hoss! Mine are about the same height, both barely above 3", they weigh 1.56oz & 1.57oz. As always, looking forward to the reviews!

 

[blankrider]

I would love to have another sidecar, but for me it's the DI joint.

I don't have any F - F adapters or Female bowls, so I would need another adapter (more $) or another nano GonG. With the extra adapter comes another piece of glass to break/lose/get dirty and it puts my vape up too high for my liking, causing the piece to become top heavy.

How are most of you using your DI joints for vaping? Should I just give in and buy the F/F adapter?

You can either get a F/F converter. Sunshine store has these nice ones in 2 packs for $8.21
http://www.dhgate.com/store/product/18-8mm-to-18-8mm-female-glass-adapter-straight/197859794.html

Or you can get a custom gong with female joint from @VaPeD&CoNfUsEd. This option cost more but is the best option in my opinion. I have one in each size but if you get a 18mm female and use a reducer it will work for both 14 and 18

 

[Tweak]

I have that piece, I take my infamous mouthpiece, attach 1" tubing to bottom of 14mm joint and it fits perfect in the mp of mine. Mine is almost 8" tall, 4.25" width, almost 3" diameter base, & just under 4.25" to top of DI...

Funny you should mention that, I was doing the exact same thing with my infamous MP but it never crossed my mind to use in on this piece. I would already have this piece if the neck was bent, .

Or you can get a custom gong with female joint from @VaPeD&CoNfUsEd. This option cost more but is the best option in my opinion.

I totally agree, I prefer the custom female GonG, but $$ is tight right now, .

Just find it a bit silly to spend more an the GonG than the bubbler, just trying to avoid that. Your image isn't helping, . I guess once I bought the GonG, it would open up my options for all the DI, which isn't a good thing, .


I should open a banana stand,

 

[blankrider]

Haha it is true that the gong and sidecar in that picture cost the same amount but I don't see it as a bad thing. Just a testament to how low the prices are for some of this China glass.

I can assure you that you will not regret spending the money for a custom gong from @VaPeD&CoNfUsEd. He will take care of you. Just don't wait too long because he is getting increasingly popular which eventually leads to rising prices and longer wait times.

 

[Cannabis Connoisseur]

I need to buy a Solo Gong from @VaPeD&CoNfUsEd. It'd be nice to try it with all these pieces I've accumulated. I stopped seeking a gong after realizing that a certain company kept me anticipating it to no avail. I ordered a 18mm female to 14mm female adapter the other day from the Oregon Glass Blower so I can order several little pieces. First will be the Double Barrel and Inline to triple Donut. Meant to order those earlier but got distracted with my Honeycomb Ball Rig and the Recycler coming from @PoopMachine. I have to purchase a Sidecar Hydratree from Vapexhale then I'll be back to China!!! 3 American pieces for $530 in the last month which is reasonable. I'm not complaining because I find things in these purchases that justify them for ME, but I'm just saying I could've had about 15 pieces (give or take a few) from China for this price. Lol, reading what I just wrote made me realize I'm about to change this G.A.S to another kind of GAS!!! The kind my 79 T/A takes VP RACING GAS

 

[ataxian]

I need to buy a Solo Gong from @VaPeD&CoNfUsEd. It'd be nice to try it with all these pieces I've accumulated. I stopped seeking a gong after realizing that a certain company kept me anticipating it to no avail. I ordered a 18mm female to 14mm female adapter the other day from the Oregon Glass Blower so I can order several little pieces. First will be the Double Barrel and Inline to triple Donut. Meant to order those earlier but got distracted with my Honeycomb Ball Rig and the Recycler coming from @PoopMachine. I have to purchase a Sidecar Hydratree from Vapexhale then I'll be back to China!!! 3 American pieces for $530 in the last month which is reasonable. I'm not complaining because I find things in these purchases that justify them for ME, but I'm just saying I could've had about 15 pieces (give or take a few) from China for this price. Lol, reading what I just wrote made me realize I'm about to change this G.A.S to another kind of GAS!!! The kind my 79 T/A takes VP RACING GAS

What you write is interesting!
I have been using a 9mm thick glass water pipe that diffuses poorly. However with a CHAISEN and ASH COLLECTOR it has be come my driver!

Today I have this rig to clean.
Normally I have like 10 bubblers, 3 stems and 3 or 6 GonG's and a bunch of adapters and a few JHOOKS.

To have one great piece is not a bad ideal from a practical perceptive!

I have to tell myself this so I don't buy more stuff!

I have GAS like a bad habit I guess.
For this reason this cheap glass will always be attractive!