Cheap High Quality Bubbler

ataxian

PALE BLUE DOT
@abcd5432 I don't doubt you, I would expect an authentic mobius piece to kick absolute ass and blow the china clone away, however for this vaporist, they both break just as easy. Thanks for the heads up about the single perk version of the 186! I should have bought that instead! :doh:
The very first piece: KNOCK OFF $12.00 DELIVERED?
2Ehtsac.jpg
 

almost there

Well-Known Member
Hey everyone I'm back with another question, I'm looking at these 2 hydratubes at DHGate for my Maxx, both these listings are more or less the same with a difference of 2 inches in height. I personally would rather go small, would someone please give me their thoughts as to which one, what the advantages of each would be, thanks
http://www.dhgate.com/product/new-v...808155915b7e015596076c302199:null:r0394575411

http://www.dhgate.com/product/21cm-...nfo=1,null,6#cpmfvh-6-5|null:null:r1325304935

I like to add the the FC188 I bought from Stevenlmz came with all sorts of defects, is yinmin any better? They have this in the sunshinestore too, any of these vendors that are better than the others? Thanks
 
Last edited:

almost there

Well-Known Member
What kinda defects dude? As mentioned all 3 I bought recently were perfect save for one tiny bubble that was only aesthetic (and expected!).
well just about all the internals was lopsided or slanted. The joint is tilted, the airpath is slanted and the perc was lopsided, I got $12 back but I would rather have had a better piece and no discount. In any case my main worry with the HT is it won't sit straight on the maxx base. I like the smaller size but I just don't want to get it and realize later the extra 2inches makes a world of difference.
 
almost there,
  • Like
Reactions: biohacker

almost there

Well-Known Member
I would have smashed them and had them resend! That's so weird that mine were practically flawless and yours were so bad! I guess it's just a numbers game..
I considered doing what you suggested but I just didn't have the patience to wait another few weeks. I ordered the glass in anticipation for my hopper;). Hopper came half dead so it was a letdown in both departments. Should have sent the hopper right back, smashed the glass and started new:nod:
 

ataxian

PALE BLUE DOT
Hey everyone I'm back with another question, I'm looking at these 2 hydratubes at DHGate for my Maxx, both these listings are more or less the same with a difference of 2 inches in height. I personally would rather go small, would someone please give me their thoughts as to which one, what the advantages of each would be, thanks
http://www.dhgate.com/product/new-v...808155915b7e015596076c302199:null:r0394575411

http://www.dhgate.com/product/21cm-...nfo=1,null,6#cpmfvh-6-5|null:null:r1325304935

I like to add the the FC188 I bought from Stevenlmz came with all sorts of defects, is yinmin any better? They have this in the sunshinestore too, any of these vendors that are better than the others? Thanks
I've bought stuff on dhgate.com by most vendors.
SUNSHINE, STEVEN79, YINMIN, LIBERTY, the list goes on? I have been buying CHEAP GLASS since I broke most of my custom glass.

$450 or $45 = YOUR SAFE

Just be CIVILIZED
CANNABIS is safer than MILK?
 

dgmulf

Well-Known Member
Quick question for any FC-UFO owners out there: do you think I should go with 3/8" or 1/2" ID silicone tubing for replacing the whip? The one that comes with the UFO appears to be 3/8", but it seems like a pretty tight fit, and I'm thinking it might be better to go slightly wider?
 

ataxian

PALE BLUE DOT
Quick question for any FC-UFO owners out there: do you think I should go with 3/8" or 1/2" ID silicone tubing for replacing the whip? The one that comes with the UFO appears to be 3/8", but it seems like a pretty tight fit, and I'm thinking it might be better to go slightly wider?
Whips are cool if their SILICONE.

OGB makes a Mouthpiece Male adapter I use sometimes. (have it bent)
 
ataxian,

Alexis

Well-Known Member
I still believe that dairy is bad for humanity!
If not full stop (and there is certainly a debate to be had there), then at the very least, just like most things most people consume now (salt, fat, sugar, wheat, meat etc etc), it is the specific type, or form that is causing the serious problems.

All this techno food, refined, denatured, rearranged, posioned, modified, and probably spat on by government "food spitter" employess, just for good measure.

For a start, most cows nowadays, except in parts of Asia and some other places, are the newer "A1" cattle breed, coming from a gene mutation. It is this A1 milk that causes the mucus production, and other harmful effects.

Add the pasteurisation, homegenisation, antibiotics, hormones in non organic etc.

Let alone the view that milk isnt right for us anyway, or after infancy.

I do think orgainc grass fed butter and ghee has a place though, ideally from A2 cows, or better, goats.

On the other hand, cannabis is most definitely here for us to consume, although I think really we are meant to be juicing it raw in big quantity, and using non psychoactive whole plant extracts.
 
Last edited:

flotntoke

thoroughly vaped
Quick question for any FC-UFO owners out there: do you think I should go with 3/8" or 1/2" ID silicone tubing for replacing the whip? The one that comes with the UFO appears to be 3/8", but it seems like a pretty tight fit, and I'm thinking it might be better to go slightly wider?

Go with the 3/8
 

yogoshio

Annoying Libertarian
@ataxian, or anyone with experience with both!!!


I see you've been using this:
http://www.dhgate.com/product/new-t...tube/388696107.html#s1-23-1b;searl|4041002983

Have you tried this one before?
http://www.dhgate.com/product/new-thick-stable-10-inches-25cm-tall-vapexhale/388645300.html

If so, do you have a preference? Is the chandelier one easier to use with the glass handle? (I know it's not an actual handle lol)

Getting to pick one as a birthday present :rockon: Finally getting a hydratube again since we are getting more into concentrates.
 
yogoshio,
  • Like
Reactions: ataxian

ataxian

PALE BLUE DOT
@ataxian, or anyone with experience with both!!!


I see you've been using this:
http://www.dhgate.com/product/new-t...tube/388696107.html#s1-23-1b;searl|4041002983

Have you tried this one before?
http://www.dhgate.com/product/new-thick-stable-10-inches-25cm-tall-vapexhale/388645300.html

If so, do you have a preference? Is the chandelier one easier to use with the glass handle? (I know it's not an actual handle lol)

Getting to pick one as a birthday present :rockon: Finally getting a hydratube again since we are getting more into concentrates.
The 2nd one I like better.
Copy of the BOMB is my preference.

The FC MOUTHPIECE from steven79 I like better than the first one on your list.

Whatever you like!

We are all different.

I have a lot of piece's?

Now I am CIVILIZED sometime's?

My old D020 I use today.
 

yogoshio

Annoying Libertarian
I need the option of upright use so I can use concentrates. Thanks!

I have heard that the bomb replica is awesome, but I like the look of the first piece, but I want performance, not looks, and I know you're a civilized, experience glass user, and trust your opinion.
 
Last edited:
yogoshio,
  • Like
Reactions: ataxian

ataxian

PALE BLUE DOT
I need the option of upright use so I can use concentrates. Thanks!

I have heard that the bomb replica is awesome, but I like the look of the first piece, but I want performance, not looks, and I know you're a civilized, experience glass user, and trust your opinion.
I use the first one as well.
However if I was on a budget I gave my response.

 

Baron23

Well-Known Member
Hi guys - just got my FC-188 (no logo) matrix with 14 mm joint from Stevenlmz79.

[link removed]

The base is VERY wide and flat/stable. No obvious bubbles. No leaks. Functions great.

This is, to me, a great piece to use with the GH, the Enano Gong, the Vapcap...basically herb vapes. I don't see this as an oil rig as I have some other pieces better suited. But for water treating herb vapor, I think this is a winning piece.

Cheers

Modnote: Link to labeled counterfeit glass removed
 
Last edited by a moderator:

abcd5432

Well-Known Member
Hi guys - just got my FC-188 (no logo) matrix with 14 mm joint from Stevenlmz79.

[link removed]

The base is VERY wide and flat/stable. No obvious bubbles. No leaks. Functions great.

This is, to me, a great piece to use with the GH, the Enano Gong, the Vapcap...basically herb vapes. I don't see this as an oil rig as I have some other pieces better suited. But for water treating herb vapor, I think this is a winning piece.

Cheers
I'm about to order this, some zdglass (he looks to have a lace sphere perc? Wtf? Anyone seen China do thus before? Seed of life is my next high end rig to test), Hfy glass clutch, and yingmin 60t clone + matrix vapexhale tube.

Also going to write an article on customer service with all the vendors I've dealt with and interacted with since I've ordered or talked to a bunch at this point.
 
Last edited by a moderator:
abcd5432,
  • Like
Reactions: ataxian

ataxian

PALE BLUE DOT
Back to Music study!
Hi guys - just got my FC-188 (no logo) matrix with 14 mm joint from Stevenlmz79.

[link removed]

The base is VERY wide and flat/stable. No obvious bubbles. No leaks. Functions great.

This is, to me, a great piece to use with the GH, the Enano Gong, the Vapcap...basically herb vapes. I don't see this as an oil rig as I have some other pieces better suited. But for water treating herb vapor, I think this is a winning piece.

Cheers
I have this one!
It will get you MEDICATED GONZO STYLE.
Becareful? Look who's talking?
SPACE CANDY + WATER SETUP + PORTABLE of some kine? = MAX FLIGHT

I DID IT MY WAY!

t6tL0pK.jpg

420 everyday!
 
Last edited by a moderator:

yogoshio

Annoying Libertarian
I ordered my bomb clone yesterday with the tree perc base. For an extra $12 I couldn't pass it up. It'll be the first package mailed directly to our new house!:rockon::rockon: We'll see how long yingmin takes to get the the Chicago area :razz:
 
Top Bottom