Cheap High Quality Bubbler

[ataxian]

D022 is my fav piece ever. I wish it was as cheap as it used to be.

My D022 was $22.00. (love it)
This works good with a portable. (cheap)

I break Glass daily.
Had to make a new perk!
Small mouthpiece is my thing.

 

[FlyingLow]

What is the d020-9?

 

[ataxian]

What is the d020-9?

I don't know?

TOO much SHATTER = CIVILIZED
D-022 is all I know at the moment?

 

[FlyingLow]

Ataxian, do you use corn cob holders for a dabber?

 

[ataxian]

Ataxian, do you use corn cob holders for a dabber?

They come in really cool colors.
$1.50 - $4.00 10 pack.

Corn Holders.

Whatever works!

I'm Dedicated + Medicated = CIVILIZED

My wife had me put all my paraphilia in a closet in the garage! (at least it's big.)
She buy's me whatever I need to vape properly so instead of 3 zones I only have 1?

However I still vaporize everywhere!

CANNABIS is safer than MILK?

 

[invertedisdead]

CANNABIS is safer than MILK?

VAPORIZED > PASTEURIZED

 

[Baron23]

I don't know?

TOO much SHATTER = CIVILIZED
D-022 is all I know at the moment?

Ah...hahaha.... @ataxian, is that corn cob holder your dabber! Whoooeee! LOL

You are definitely march to your own drummer, my friend. Not laughing at you, laughing with you (I hope!).

Well, Chase from Terpy Tues is still using a turkey lacer as a dab tool. $500 in glass, at least $500 in e-nail, inserts, controller, and coil, and he uses a tool to hold turkeys together. haha

I like this kind of stuff...quirky. I think that's civilized.

 

[MoltenTiger]

I would like a small bubbler for my Vapcaps. Do you think these would work? Or are they just too tiny?

I think they are too small, or the joint is on the wrong angle to work well

 

[invertedisdead]

Yeah they are 10mm, you want 14mm.

 

[weenstoned]

Ya definitely way too small. The pieces they are likely ripping off are @7tenglass on instagram. They make a lot of micro rigs with custom 6mm nails, but also 10mm ones. The body of their 10mm micros are probably like 40-60% bigger.
https://www.instagram.com/p/BOpVEFLAZkO/?taken-by=7tenglass

I feel like those china ones are just an invitation to burnt fingers/lips if you do a couple in a row and depending on how steady your hands are while torching.

 

[FlyingLow]

That's awesome, I use a broken screwdriver made from high speed steel.

 

[ataxian]

Ah...hahaha.... @ataxian, is that corn cob holder your dabber! Whoooeee! LOL

You are definitely march to your own drummer, my friend. Not laughing at you, laughing with you (I hope!).

Well, Chase from Terpy Tues is still using a turkey lacer as a dab tool. $500 in glass, at least $500 in e-nail, inserts, controller, and coil, and he uses a tool to hold turkeys together. haha

I like this kind of stuff...quirky. I think that's civilized.

@Baron23 you seen those little water tools?
I would break them for fun!
I did so much SHATTER in my D022 with a TI DOMELESS NAIL. My COLAS for night time SHATTER MOOD?
Now I'm beyond MEDICATION.
WAKE and VAKE with my FC UFO and COLAS to get correct!

I like lots of volume for my SHATTER?
My SHATTER is too strong for day use.

Playing with TANKS, MOD'S & SUB omh vaporizing. Almost got it wire?
CLAPTON COILS submerged in CERAMIC attached to a 510 connector!
Had to lower my WATTS?
38w 28w down to 18Watts?
ALMOST CIVILIZED

ALMOST!

(I like to see how cheap I can do things?)

@FlyingLow I missed u?
Show a picture of your DABBER?

Flying High into ORBIT!

@CarolKing do you still have the D022?

 

[galacticdad]

IMO of course but I don't understand the appeal of these über tiny rigs. They're not comfortable to use and not as portable as they seem by the time you add in a banger, torch, dabber, carb cap, etc. I remember using a micro rig with a ti nail before bangers were popular and it made me scared to even pick the damn thing up. Banger makes it way safer but I'd rather have the function of a larger piece. I see these functional Klein carb caps hashtag thousanddollarsmoke on Instagram and think they are silly. They're cool looking but I don't want to rip one.

I agree with you, they're pretty small and definitely awkward to use. I should have prefaced my original post and said that purchasing one of these was one part curiosity, and one part dig at my roommate who is of the opinion that the smaller a rig is, the better. At $22, I'll take a gamble!

Gotta save for Steven's new 8" fab egg that somehow eluded me anyway

 

[flotntoke]

I would like a small bubbler for my Vapcaps. Do you think these would work? Or are they just too tiny?

Haha! Guess you have found your way here. These are cute, but not too functional IMO. Think there are many better choices than this for a VC.

 

[ataxian]

Haha! Guess you have found your way here. These are cute, but not too functional IMO. Think there are many better choices than this for a VC.

FC UFO

FLAVOR WISE?

@kellya86 @Baron23 @CarolKing @CuckFumbustion @Stu @t-dub @Cannabis Connoisseur Anybody try this?
@Justpassedu you must of?

WOW!
BLOW me down!
LOST at SEA.
CIVILIZED SATURDAY

 

[CuckFumbustion]

FC UFO

FLAVOR WISE?

@kellya86 @Baron23 @CarolKing @CuckFumbustion @Stu @t-dub @Cannabis Connoisseur Anybody try this?
@Justpassedu you must of?

WOW!
BLOW me down!
LOST at SEA.
CIVILIZED SATURDAY

@ataxian, I've used the D020-D inside directly in the socket - no adapters, but make sure that cap is on tight. Has a mouth extension to it too. You have more of a power setup than a flavor setup. More bubbles getting to the brain quicker. Lost at Sea? indeed.....

The top of my FCball can kinda fit an 18mm make end. So I put a 45 degree F/F on the mouthpiece and my HT on top of that. God I miss my HNY stereo matrix. That thing used to make me light headed. Might have it repaired and make it better than new.

 

[ataxian]

@ataxian, I've used the D020-D inside directly in the socket - no adapters, but make sure that cap is on tight. Has a mouth extension to it too. You have more of a power setup than a flavor setup. More bubbles getting to the brain quicker. Lost at Sea? indeed.....

The top of my FCball can kinda fit an 18mm make end. So I put a 45 degree F/F on the mouthpiece and my HT on top of that. God I miss my HNY stereo matrix. That thing used to make me light headed. Might have it repaired and make it better than new.

Dude!

I'm MEDICATED to the MAX!
DEDICATED = CIVILIZED

FLAVOR is delightful.
EFFECTIVE?

DEVASTATING!

EXPERIMENTATION = CIVILIZATION


420 was BUBBLE GUM OG = NO SEEDS?

MORNING = SATIVA
AFTERNOON = HYBRID
BEFORE BED = INDICA

LIFE = CIVILIZED FC UFO tonight!

 

[PPN]

Hi folks, is there, on the cheap glass market, any dry glass tube similar to a "steam roller", using a carb hole and 14mm or 18mm ?

I'm actually using my Vapexhale dry mp (18mm)or a glass extractor tube (14mm) I never used for its original purpose but I would prefer something who can stay on the vape while clearing hits.

 

[jl420]

http://www.dhgate.com/product/recycler-rig-oil-rig-bong-dab-rigs-and-oil/394262722.html

Always on the prowl for new glass when I came across this little number. (with store coupon I paid $73) It's 8.5 inches high with a 14mm female joint. Contacted seller and they said it was 3-4mm thick made with colored glass not painted. Luv the UFO mouth-piece kind of gives it a almost CIVILIZED look to it

 

[ataxian]

@ataxian, I've used the D020-D inside directly in the socket - no adapters, but make sure that cap is on tight. Has a mouth extension to it too. You have more of a power setup than a flavor setup. More bubbles getting to the brain quicker. Lost at Sea? indeed.....

The top of my FCball can kinda fit an 18mm make end. So I put a 45 degree F/F on the mouthpiece and my HT on top of that. God I miss my HNY stereo matrix. That thing used to make me light headed. Might have it repaired and make it better than new.

I was experimenting (medicating).

male 18mm x female 18mm adapter then:
HYDROTUBE (made better seal)

@Justpassedu told me about it.
WORK's great was you improve the seal!

PLAYING & CLEANING GLASS = CIVILIZED

 

[OldOyler]

OldOyler, got a link to this? I'm expecting my first vape to be delivered tomorrow - Firewood 4 - and this looks nearly perfect for it.

I quit smoking about 15 yrs ago and decided to 'pick it up again' for medical reasons late last year. So much has changed since then, especially with glass. Went into a head shop recently and thought I'd walking into a chemistry supply store. Still learning all the new terminology and devices. Things were so much simpler back in the day...

Peace and sorry it took me so long!

That was actually my retired piece, it had been donated to me.

Good things to you friend!

 

[flotntoke]

Does anyone know anything about this piece or the seller? Looks like a pretty nice (& cheap) piece. Anyone know of a function video? Can find vids of the piece this one is inspired by, but not this one.

 

[ataxian]

Peace and sorry it took me so long!

That was actually my retired piece, it had been donated to me.

Good things to you friend!

Do you have a D022?
@Mr. Gweilo 420 do you have one?
Maybe it's too old?
I still use it!
@CarolKing do you have your's still?
Who has one?

Pretty = CIVILIZED

@DDave your tubing that comes in you kit is the best!
Today is TUESDAY = CIVILIZED

 

[Dubekoms]

I just want to share my experience with seller glassartist. About 2 months ago I placed an order with glassartist for 3 dabbucino's and a mini recycler. They were shipped in a timely manner and would have made it to my house in about a week. However, the package was never delivered and I assumed it was lost after a week or so of being "in transit" by USPS. I contacted USPS and they told me it was most likely lost and to file a claim which went nowhere since the package had no insurance on it. I thought I was screwed out of the pieces but contacted glassartist to see what could be done. I explained to him what happened and he said he would ship out another package. Awesome. I waited a week or so and asked for a tracking number. he responded with asking me to confirm my address. I thought it was weird that he would wait for me to ask about the package and that he waited a week without re-shipping the package, but it was not his fault the package was lost and I was thankful to be getting what I had already paid for. I confirmed that it was the correct address. He said he would ship it that day. a few days later I asked him for a tracking number and he said he would ship it that day. ughhh. ok whatever. About a week after that I asked him again for the tracking number. He said he would check into it and never got back to me. The next day I told him I need a tracking number or a refund. He told me he had already sent it and would get me the tracking number in one second. He never got back to me. a few days go by with no response from him, so I contacted dhgate to mediate the situation. after that Glassartist sent me a message asking to tell dhgate that the issue is resolved and he would send out the package. lol.

Im not trying to throw Glassartist under the bus, as I'm sure plenty of people have had plenty of good experiences and pieces from him. I just wanted to relay the experience that I had with him. He was very unprofessional and flat out lied to me numerous times.

 

[jl420]

I just want to share my experience with seller glassartist. About 2 months ago I placed an order with glassartist for 3 dabbucino's and a mini recycler. They were shipped in a timely manner and would have made it to my house in about a week. However, the package was never delivered and I assumed it was lost after a week or so of being "in transit" by USPS. I contacted USPS and they told me it was most likely lost and to file a claim which went nowhere since the package had no insurance on it. I thought I was screwed out of the pieces but contacted glassartist to see what could be done. I explained to him what happened and he said he would ship out another package. Awesome. I waited a week or so and asked for a tracking number. he responded with asking me to confirm my address. I thought it was weird that he would wait for me to ask about the package and that he waited a week without re-shipping the package, but it was not his fault the package was lost and I was thankful to be getting what I had already paid for. I confirmed that it was the correct address. He said he would ship it that day. a few days later I asked him for a tracking number and he said he would ship it that day. ughhh. ok whatever. About a week after that I asked him again for the tracking number. He said he would check into it and never got back to me. The next day I told him I need a tracking number or a refund. He told me he had already sent it and would get me the tracking number in one second. He never got back to me. a few days go by with no response from him, so I contacted dhgate to mediate the situation. after that Glassartist sent me a message asking to tell dhgate that the issue is resolved and he would send out the package. lol.

Im not trying to throw Glassartist under the bus, as I'm sure plenty of people have had plenty of good experiences and pieces from him. I just wanted to relay the experience that I had with him. He was very unprofessional and flat out lied to me numerous times.

I've bought quite a few bongs from DHgate and have had only a couple of issues. Mostly late shipping (waited almost 3 months for one recent delivery) but I find if you have a seller who is acting unprofessional file a claim with DHgate. I've done it with 2 sellers I no longer deal with and it gets the job done. Within days I get all sort of apologies and a "magic" new tracking number that actually tracks my order. I'm not looking for freebies all I want is what I paid for. If it's gonna take a month or two before it's deliverd than just say so. By getting bad reviews you can greatly impact their buisness and I always read the reviews on new sellers if I see too much bullshit going on I move on to the next seller. I've bought stuff before from glassartist and I never had any issues but I will think twice before giving him anymore of my buisness. Thanx Dubekoms for the heads-up...