weenstoned
Well-Known Member
Technically 18.8mm but some people round up to 19. It will fit.
Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
I submitted this to sunshinestore and they said it was too close to Stevens FC-mp, so I guess look for that one or wait for @shark sandwich modular design from cleanclearglass.
FluffMolotov
Well-Known Member
My FC-Mod which arrived with a hairline crack (around the main bubbler lip), has finally popped off - and only after a handful of uses. Anyone have a spare to sell, perchance? Saddest 4:20 yet...
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Contact the seller, they'll likely make it right for you.My FC-Mod which arrived with a hairline crack (around the main bubbler lip), has finally popped off - and only after a handful of uses. Anyone have a spare to sell, perchance? Saddest 4:20 yet...
eLiguL
Well-Known Member
Thank you, you are a gentleman and a scholar. I tried searching FC-MP on DHgate with 0 results, ill keep trying until something pops up.
just_the_flu
they say im crazy but i have a good time
I hope so................
Yep, They are all actually 18.8mm , some people round up while others round down. Well 10mm, 14.5mm, or 18.8mm are the standard sizes. They are all just standard scientific lab glass joint sizes. The only thing you might run into with compatibility is between ISO and US jointed pieces but don't worry about all that, your fine with any 18mm, 18.8mm, or 19mm attachments or bowls with this piece. They are all just different names for the same joint size.
And I am pretty sure you will love that piece for vapor or combustion. I even had my enail on it last night for fun with some shatter. Not as flavorful as the FC-710 for dabs but damn it was so much smoother.
HAPPY 4/20 !!... I just ate a reclaim brownie
ClearBlueLou
unbearably light in the being....
That IS nice-looking, I really hope you enjoy it - noice prezzy for the holiday!Thanks to Mr.Bonsai420 and all the other posters in this thread I ordered this from Smokinjs.com.
http://smokinjs.com/1'-Tall-Hand-Blown-Glass-Shower-Head-Glass-on-Glass-Bubbler-MMBB10/
I ordered today and they shipped my order today!They were very quick to respond to my emails and answered all of my questions in a professional and courteous manner.
thanks so much for the store report! NOTHING beats actual customer reports of smooth and satisfying transactions for building customer confidence...will be offering my own in turn, soon
FluffMolotov
Well-Known Member
Thanks @Quetzalcoatl , I sent Stevenlmz79 a message or two and the person chatting to me doesn't seem super keen to help out... After trying out the function and dismantling the pipe it now looks like this:
Major bummer.
Major bummer.
That blows dude. Any chance you could bring it to a local blower and have them repair it? Realistically it'll probably cost more than a new piece but the down time would be less.Thanks @Quetzalcoatl , I sent Stevenlmz79 a message or two and the person chatting to me doesn't seem super keen to help out... After trying out the function and dismantling the pipe it now looks like this:
Major bummer.
Monsoon
Well-Known Member
I'm looking forward to hearing your thoughts on both!
063_XOBX
Ganjapreneur
FTK is almost flawless (I haven't found one and my friend who blows glass was amazed by it). Mini-Hamm is damn good but the mouthpiece is the wrong shape so it's more restricted than I'd like and with a drop down it is prone to tipping to the right side if you're not careful.
Functionally:
FTK 4.9/5
Mini-Hamm-4/5
demonscars
Well-Known Member
Glad to hear a good CCG FTK report! Is this the second good review on that one or is it the first?
In my great FTK race of 2016 a twist has occurred and it looks like Stevens will be here tomorrow while CCG's might not be here till Monday! This probably has to do with apparently leaving China from different parts. Either way, looks like I'll be able to compare next week. Even though Stevens tracking number seemed fake, I think his operation may be in an area where maybe the post office is kind of shitty, I know I live in an area where we have terrible (unusually so) postal service.
Monsoon
Well-Known Member
What they likely do is print the shipping label with the tracking number so it takes awhile to activate if at all. I forget his exact situation but it's definitely more of a logistics issue.
The tracking for my CCG-FTK activated so with any luck I'll have it by next week! Next I'm probably going to order the Wake and Bake clear incycler. Anyone know if there's any difference between the linked one and the CCG2016 one besides colour, joint options and logo?
FluffMolotov
Well-Known Member
After showing Stevens the latest pic they promised to send me a replacement in my next order... Now heres hoping they stock a nice hydratube soon!
ClearBlueLou
unbearably light in the being....
Good to hear - that's such a nice piece, a real shame to watch it come apart instead of using it...props to Steven for coming thru for you!
...and fingers crossed on your replacement!
Last edited by a moderator:
A few people were looking for small 14mm female bubblers for cheap a while back so I went on the hunt. I found a little American made glass company, Kraze, selling little bubblers on ebay for $40. I offered him $20 and his listing was set to accept anything $20 or over. I had ebay bucks to spend so I went ahead and bought it.
It took about a week to come in. It isn't the thickest glass but it is pretty well made for the money and the little showerhead perk is really nice! The downstem is signed which is also a nice touch that you won't find on a $20 Chinese bubb.
I first used it for a few dabs. Really nice and smooth. Full flavor from the ultra low water required. Not bad at all for a piece no bigger than a Purr travel bubbler. Then I used it for flower and was really surprised at the pretty well cooled vapor despite it's tiny can size. Hell for free ebay bucks or $20 either way you can't really go wrong. If you are looking for a new 14mm female hand held bubbler for $20 check out http://www.ebay.com/itm/162028363693?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
He lists them every few days and his last few just sold out (to my FC friends no doubt lol), I really would have been happy with anything so this is awesome lol.
It took about a week to come in. It isn't the thickest glass but it is pretty well made for the money and the little showerhead perk is really nice! The downstem is signed which is also a nice touch that you won't find on a $20 Chinese bubb.
I first used it for a few dabs. Really nice and smooth. Full flavor from the ultra low water required. Not bad at all for a piece no bigger than a Purr travel bubbler. Then I used it for flower and was really surprised at the pretty well cooled vapor despite it's tiny can size. Hell for free ebay bucks or $20 either way you can't really go wrong. If you are looking for a new 14mm female hand held bubbler for $20 check out http://www.ebay.com/itm/162028363693?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
He lists them every few days and his last few just sold out (to my FC friends no doubt lol), I really would have been happy with anything so this is awesome lol.
Last edited:
Justpassedu
Well-Known Member
Hey guys I decided to try a FCMod from a different seller about a month ago called Bongglass. I have to say it arrived quickly and is fucken awesome. The glass is thick , perc's all operate smoothly and it just feels so solid. This was prob my favorite purchase I have made off dhgate so far. It really feels like I got a piece worth $200+ when in fact it was under $50. I tried pairing it with both my dhgate Hydratubes and it became even better. I since got rid of the ht recycler as it does not recycle well at all but now use it with my other dhgate ht and I am enoying it allot.
MySega
Well-Known Member
demonscars
Well-Known Member
Got the Steven FTK today. Looks good, vortexes well.
Last edited:
Hyphy
Karma
My god, my D020D got here quick! Took just over a week to get here. Bubble-wrapped bombproof and showed up with no cracks.
Looks perfect for me. Great size, thick glass. Just need a few more days now for my UD to show up. Thanks again for suggesting it, looks like a home run!
I'd love to snag one but the picture he shows on eBay has the mouth tube lower than yours. I'd say yours was a definite win. I like my mouthpeice higher like yours.A few people were looking for small 14mm female bubblers for cheap a while back so I went on the hunt. I found a little American made glass company, Kraze, selling little bubblers on ebay for $40. I offered him $20 and his listing was set to accept anything $20 or over. I had ebay bucks to spend so I went ahead and bought it.
It took about a week to come in. It isn't the thickest glass but it is pretty well made for the money and the little showerhead perk is really nice! The downstem is signed which is also a nice touch that you won't find on a $20 Chinese bubb.
I first used it for a few dabs. Really nice and smooth. Full flavor from the ultra low water required. Not bad at all for a piece no bigger than a Purr travel bubbler. Then I used it for flower and was really surprised at the pretty well cooled vapor despite it's tiny can size. Hell for free ebay bucks or $20 either way you can't really go wrong. If you are looking for a new 14mm female hand held bubbler for $20 check out http://www.ebay.com/itm/162028363693?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
He lists them every few days and his last few just sold out (to my FC friends no doubt lol), I really would have been happy with anything so this is awesome lol.
JediMindTrixR4Kidz
Member
Hey guys. I picked up a fab beaker from Kathy as my first china purchase about two months ago and I've been enjoying it for the price, but it seemed thin so I didn't expect a long life.
I've never had a rig like this but I'm pretty sure it's on deaths door step. Figured I'd check here to see if what is happening is a normal thing. I've got some weird thin lines forming that look like pre-cracks? Zero evidence of damage I can see in the glass it self, but these lines are certainly disconcerting haha
I've never had a rig like this but I'm pretty sure it's on deaths door step. Figured I'd check here to see if what is happening is a normal thing. I've got some weird thin lines forming that look like pre-cracks? Zero evidence of damage I can see in the glass it self, but these lines are certainly disconcerting haha
YungLeaner
Well-Known Member
Pre-cracks are a good word for that, yeah. I definitely would stop shaking the bong at all to clean it like most of us do with rubbing alcohol and salt because you want to avoid putting stress on that joint as best as you can. Definitely stop torching nails on it if you were doing that, number one way to kill a female joint. And just be careful, maybe a thin band of duct tape on the outside would add some strength to it but someone smarter than me can explain why that wouldn't really do anything.Hey guys. I picked up a fab beaker from Kathy as my first china purchase about two months ago and I've been enjoying it for the price, but it seemed thin so I didn't expect a long life.
I've never had a rig like this but I'm pretty sure it's on deaths door step. Figured I'd check here to see if what is happening is a normal thing. I've got some weird thin lines forming that look like pre-cracks? Zero evidence of damage I can see in the glass it self, but these lines are certainly disconcerting haha