Cheap High Quality Bubbler

Been Vapin

Fringe Class
I get so Medicated every time I use a UFO in my session.


My two favorite pieces currently are FC UFO and FC 186. UFO with Herbalizer. Sublimator with 186. Need more desk space for the EVO!
img
 
Last edited:

A1FBG

Active Member
Ill probably go with the SiC Dish Dnail then. But $5 to try out the Dhgate banger isn't bad at all..

My two favorite pieces currently are FC UFO and FC 186. UFO with Herbalizer. Sublimator with 186. Need more desk space for the EVO!

Good to hear. My FC200 will be here in the next day or 2. Ive been itchin for it so my Sub has a good match. If using a Sublimator you must use a perc with zero drag. Even my FC710 which i feel doesn't have a terrible amount of drag, prevents a full extraction. I get larger clouds and more potent hits using the dry tube that i currently have without a doubt
 

ic3cold

Member
So Im really interested in getting A clone of the Hitman Sundae Stack. There are like three sellers that have them, Im sure a bit more. Which would you suggest. Im leaning Kath077 since she is the cheapest. Please let me know what you think.

http://www.dhgate.com/store/product/new-glass-bong-hitman-glass-sundae-stacks/248201509.html

http://www.dhgate.com/store/product/new-hitman-glass-sundae-stack-glass-oil-rigs/248988117.html (has function video)

http://www.dhgate.com/product/new-h...ss-oil-rigs/247307863.html#s1-2-7a|2223305211
 
ic3cold,

Monsoon

Well-Known Member
Ill probably go with the SiC Dish Dnail then. But $5 to try out the Dhgate banger isn't bad at all..

I've had the SiC Dish for a few weeks now and it was solid buy. You should check out the Silicone Carbide thread and post a review if you get it.

So after buying a shitload of glass from DHGate (~20 pieces), my main rotation has been weened down to the following: CCG 9" Clear Fab Egg, GB-194-1, FC-710, CCG 12" Clear Fab Egg, CCG D-Cycler, FC-Cake. Still have most of the others just they're either seldom used and some not at all. Just for reference I use these ones solely for dabbing, usually use a Mobius Clear for the odd time I use my Evo.
 

digigator

Well-Known Member
So Im really interested in getting A clone of the Hitman Sundae Stack. There are like three sellers that have them, Im sure a bit more. Which would you suggest. Im leaning Kath077 since she is the cheapest. Please let me know what you think.

http://www.dhgate.com/store/product/new-glass-bong-hitman-glass-sundae-stacks/248201509.html

http://www.dhgate.com/store/product/new-hitman-glass-sundae-stack-glass-oil-rigs/248988117.html (has function video)

http://www.dhgate.com/product/new-h...ss-oil-rigs/247307863.html#s1-2-7a|2223305211

GHG and CCG are the same folks I believe, or at least affiliated similar to how Kathy0577 and DKGlobe are affiliated. So I think the 2nd and 3rd are the same piece. The Kathy0577 photos look like they were taken in the US by looking at the cars and parks, so I don't think she actually has it done yet. With Kathy I would definitely wait until I see actual pics of her wares because her glass is usually very thin. The CCG/GHG one looks pretty legit though.
 
digigator,

A1FBG

Active Member
I've had the SiC Dish for a few weeks now and it was solid buy. You should check out the Silicone Carbide thread and post a review if you get it.

So after buying a shitload of glass from DHGate (~20 pieces), my main rotation has been weened down to the following: CCG 9" Clear Fab Egg, GB-194-1, FC-710, CCG 12" Clear Fab Egg, CCG D-Cycler, FC-Cake. Still have most of the others just they're either seldom used and some not at all. Just for reference I use these ones solely for dabbing, usually use a Mobius Clear for the odd time I use my Evo.

Thanks bro for the link. i searched for that thread but didn't have any luck finding it..

Yu like the 9 or 12 inch Fab Egg more?
 
A1FBG,

A1FBG

Active Member
There seems to be a whole lot of FC-UFO rig love

Can anything special be done with the removable mouthpiece besides replace it with a whip?
 
A1FBG,

NickDlow

Log Hog
So the quartz nails on DhGate are safe to use?

If u want to find out if it's safe, ask them for a material safety data sheet n see what they say:dog:

Or a Quartz certificate of compliance....

There seems to be a whole lot of FC-UFO rig love

Can anything special be done with the removable mouthpiece besides replace it with a whip?

The connection for the MP is an 18mm so there is a lot that can be done.
 
Last edited:
If u want to find out if it's safe, ask them for a material safety data sheet n see what they say:dog:

Or a Quartz certificate of compliance....



The connection for the MP is an 18mm so there is a lot that can be done.
So wait... Clear glass nails from DHgate are acceptable, but clear quartz would not be? I am unaware of the unsafe types of SiO2, Please elaborate.
 
Not sure what to make of this, guess it's what happens when non-cannabis consumers design glass pieces. The only possible use I can see for it would be a dual hose for 2 people to hit but that's it.


The more I look at it, the more my brain hurts... wryyyy?!

How does... What... Huh? I'm even more confused by the second video... It's an ash catcher for smaller pieces? Wat?
 
ragnorokk,

pacifica333

Well-Known Member
Not sure what to make of this, guess it's what happens when non-cannabis consumers design glass pieces. The only possible use I can see for it would be a dual hose for 2 people to hit but that's it.

What are you talking about? That's a clone of Pulse Glass' Showerhead Convertable AC/Bubbler. You can use it as a bubbler on it's own, or drop it on a big piece for flower. Sure, it's pretty ridiculous to put on a Torus, but as far as design, it's actually rather brilliant.

It is a bit high-diffusion for my tastes, but I can appreciate the design, especially for a combustion piece.
 
What are you talking about? That's a clone of Pulse Glass' Showerhead Convertable AC/Bubbler. You can use it as a bubbler on it's own, or drop it on a big piece for flower. Sure, it's pretty ridiculous to put on a Torus, but as far as design, it's actually rather brilliant.

It is a bit high-diffusion for my tastes, but I can appreciate the design, especially for a combustion piece.
Ok, so that second video is no joke? Why is it the hugest ash catcher known to man? It would be less ridiculous if the piece were smaller, IMO. Of course, I'm not always down with big glass pieces, so maybe that's why it looks wonky to me. Or perhaps it's the pieces they chose to Frankenstein it to...

As for the high diffusion, I've known plenty of combusters who arent really trying to preserve flavor so much as slash n burn.

Edit: checked Pulse's page, and the piece they attach it to in their video is significantly larger than it, which makes it look waaaay less ridiculous (as far as size goes, anyway).

I'm still curious why they (Pulse) put a reclaim adapter after the perc, unless it's really meant as just a "plug" for when you haven't hooked it up to another piece.
 
Last edited:
So, I got my banger/carb cap today. I had not had any issues with USPS in a while, but I certainly did this time around; Here's a quick run-down, in case anyone else has dicey service at their PO:

Mail came yesterday, but no package. Mailman (my usual carrier was off for the day, so a stand-in) never stepped past gate (I was home all day, and my dogs go INSANE if anyone gets past the gate), and suddenly an hour later it's updated as "attempted to deliver" (no slip was left, either) in a nearby zip code... the zip code of my local PO... hrm... Sonofabitch just didn't try to deliver it and updated the tracking when he got back to the PO.

So I go over there to try to sort it out today, when my USUAL carrier comes by today empty handed, even after double checking the truck for me. I get to the PO and the lady looks for anything with my address; nothing. She then asks for a tracking number. When I give the ePacket tracking nuymber, she says that without a USPS tracking number, she can't do anything. I firmly told her that ePackets do not update me with a tracking number so she better step the fuck back in there and try looking with her goddamn eyes this time. Lo and behold, 5 minutes later, she returns with my package, AND IT HAS NO USPS NUMBER, ONLY THE ORIGINAL TRACKING NUMBER. So if anyone tries that bullshit with you, tell them to shut the hell up and search for the number you gave them.

The banger is one of the new 4mm thick bangers from jlh, and it is indeed thick. Shipped bomb proof, and seem solid. More reports to come, unless heating the banger results in immediate death ;p

Edit: also wanted to note that right after I ordered the FC-710 someone posted about shitty packing from Steven... So I immediately sent an email to him/them asking for extra padding, and stating that other customers have mentioned their packaging needs improvement. Jane replied back that she'd do it herself and made sure to email me when it had been done/sent. I'll find out what that means, but it seems like good CS so far :)

@twentypast4 here ya go

Pretty sure jlh is just reselling hyman quartz bangers

http://www.dhgate.com/store/19928813#st-navigation-storehome
im fairly certain you're right, as those are the only 2 sellers of the Quartz bangers, and Hyman makes a bunch of Quartz art to boot-- I ordered different things from both companies to see how cushioned their shipping methods are (for future ordering).
 
Last edited:
ragnorokk,

twentypast4

#nycdabber
The banger is one of the new 4mm thick bangers from jlh. Shipped bomb proof, and seem solid. More reports to come, unless heating the banger results in immediate death ;p

Edit: also wanted to note that right after I ordered the FC-710 someone posted about shitty packing from Steven... So I immediately sent an email to him/them asking for extra padding, and stating that other customers have mentioned their packaging needs improvement. Jane replied back that she'd do it herself and made sure to email me when it had been done/sent. I'll find out what that means, but it seems like good CS so far :)
unfortunately, I read about the lack of padding in Steven's packages after I purchased and after it seems to have shipped - hopefully I'm safe.

also who is jlh with these bangers? would like to sneak a peek. :)
 
twentypast4,
Is there a way to tell if something is REALLY Quartz?
I mean, it's a Quartz banger from a place that produces lots of clear Pyrex stuff, so I was thinking if it's not Quartz, it would likely be Pyrex (back where I started, but I'd have a banger instead of a cracked, domed nail). They list a cert for their Quartz (could always be ripped from someone else), and only the banger and one other item were called Quartz, so at least they weren't trying to pass off all their glass as Quartz.
 
ragnorokk,
  • Like
Reactions: NickDlow

weenstoned

Well-Known Member
Is there a way to tell if something is REALLY Quartz?

Quartz is super cheap to make, doesn't really sense that it would be a substitute. Also if you look into Hyman Quartz they produce plenty of other quartz goods not related to oil. Personally I am of the opinion that the vast majority of Chinese nails (including titanium) are safe to use and are what they say they are since they're manufactured for resale in North America. If the raw materials were expensive I might buy it, but the only world where this makes sense is if you're an American nail company trying to fearmonger.
 

NickDlow

Log Hog
Quartz is super cheap to make, doesn't really sense that it would be a substitute. Also if you look into Hyman Quartz they produce plenty of other quartz goods not related to oil. Personally I am of the opinion that the vast majority of Chinese nails (including titanium) are safe to use and are what they say they are since they're manufactured for resale in North America. If the raw materials were expensive I might buy it, but the only world where this makes sense is if you're an American nail company trying to fearmonger.

Ehh I don't mind paying for the peace of mind. Plus supporting American made products when I can gives me a warm and fuzzy feeling lol.

The glass bubbler on the other hand, I feel comfortable using because nothing is getting heated.
 
NickDlow,

weenstoned

Well-Known Member
I don't really fault people, but it reminds me of how everyone used to badmouth Asian cars as being inferior then gradually they were acknowledged as equal/superior. Also most of the other products you use throughout your day probably won't be made in America unless you have really made a point of doing that.

I can see the point of buying American glass to get a unique piece of art, but a nail just seems like a tool to me.
 
Top Bottom