Cheap High Quality Bubbler

sickmanfraud

Well-Known Member
FC-711 aka mini pillar!


Thanks. Is there a way to search sellers for the item or a way to search for other pieces that are 14 mm female. The piece looks great, but they want $40 in shipping!?

Thanks again.

I hate to keep showing my ignorance, but from what I've seen I can get adapter(s) to make almost any item work.

Is there a drawback to using adapters to make my 14 mm male joint gongs fit?

If I am willing to use an adapter is there any piece besides the fc-711? The only seller of the fc-711 wanted almost as much for postage as the glass itself.
 
Last edited:
sickmanfraud,
  • Like
Reactions: SSVUN~YAH

grdwaste

Glass Psycho
Ordered from steven and kathy on the 15th.

My steven order had shipped within 2 days, and has been stuck in preshipment since then. Hoping I dont get the black hole...

My lathey order hasnt even shipped... Hope she dosnt give me the fake number and run around shit.
Kathy "said" she shipped my order after I complained 3 times about the delay and I'm pretty sure she posted a fake number. 5 days after posting it still no update and she says to wait another 2 days...
 
grdwaste,

Delta3DStudios

Well-Known Member
Accessory Maker
Thanks. Is there a way to search sellers for the item or a way to search for other pieces that are 14 mm female. The piece looks great, but they want $40 in shipping!?

Thanks again.

I hate to keep showing my ignorance, but from what I've seen I can get adapter(s) to make almost any item work.

Is there a drawback to using adapters to make my 14 mm male joint gongs fit?

If I am willing to use an adapter is there any piece besides the fc-711? The only seller of the fc-711 wanted almost as much for postage as the glass itself.

There is no reliable way to search since these vendors don't label their stuff properly (some say 14.4mm, others 14.5mm, others 14mm). I've searched quite a bit for a 14mm female rig since I could use one for pictures on my store

In general, 90% of the glass you find on Dhgate is either a 14mm male, or 18mm female fitting. I really have only seen a handfull of 14mm female - the PNWT knockoff is one of them

You can always buy an 18-14mm reducer. But those can be a PITA sometimes if they stick to your GONG adapter the wrong way (I've had a few stick just long enough to come loose and topple off my bubbler, and break on the ground.

I have found this 14mm rig, but haven't jumped on it:
http://www.dhgate.com/store/product/two-function-water-pipe-glass-bong-with-new/213565412.html
rBVaHVRscvGAbK0WAAE5P-OgbDA266.jpg
 

p1ssbucket

Well-Known Member
Kathy's tracking number finally started updating yesterday so looks like all my china packages are en route! I don't know if it's because I messaged her being like "the tracking doesn't look like it's working" but at least it's on it's way.

I have been checking them on both track china post and usps website. CCG is far enough in shipment that usps website recognizes it and Kathy package has made it through 2-3 tracking updates since yesterday.

It seems like she had a tracking number made but the package wasn't sent out because after I messaged her it seems like it actually got sent out.
 

ChiefKeefe

Well-Known Member
@grdwaste @p1ssbucket

My steven order finally updated in NY. Hopefully my fc-710 and fc-187 v2 are here safe and sound soon... Few days. Im 1 state from NY.

My kathy order is still processing.. I basically messaged her saying whats the deal? Because I would be willing to order WAYYY more but not if she wants to play games.

I ordered like 12+ pipes from SSS because quality and service was next level, his designs are just basic.. :/
 

BFed123

New Member
Just ordered this guy from yingman5, shipped out next day with tracking. Does anyone own this or come across this piece before? Got good reviews but was hoping for a hands on review of this guy. Thanks!
temp2.0x0.jpg
temp2.0x0.jpg
 

p1ssbucket

Well-Known Member
I don't feel great about the pieces with knockoff logos on it like that logo doesn't need to be there.... But then again when's the last time anyone heard of a genuine roor...
 
p1ssbucket,

cybrguy

Putin is a War Criminal
Yeah, the counterfitting is frowned on in here. Many of those logos can be removed (if not etched, obviously) with various cleaning solutions. Simply Green is one I think. And often you can ask @yingmin5 to send one without the logo.
 
cybrguy,

BFed123

New Member
Sorry guys, just to clarify I know it's replicated and I wasn't trying to pass it off as real. Was just wondering how his quality of glass is for this type of piece. Not for resell or anything, just a personal smoke. My apologies
 

cybrguy

Putin is a War Criminal
Just fyi, I wasn't meaning to pick on you, so no worries. We are all about copies here in this thread. We just don't want them to pretend to be the original designers product, and that is what the logos do. And often they are even the wrong logo... ;)
 

Delta3DStudios

Well-Known Member
Accessory Maker
Just ordered this guy from yingman5, shipped out next day with tracking. Does anyone own this or come across this piece before? Got good reviews but was hoping for a hands on review of this guy. Thanks!
temp2.0x0.jpg
temp2.0x0.jpg


Yingmin5 is a reputible vendor, I'm sure that glass will be nice and thick.

That piece though looks more setup for combustion than vaporizing. You'd probably only need enough water to cover the first perc

As @cybrguy mentioned, you should be able to remove the logo by using a cleaning solution called "Simple Green"
 

Been Vapin

Fringe Class
Is a FC711 too tippy for a Sublimator Apollo? I swear someone had posted one earlier back?

I chatted with Steven today. Said they were still waiting on the cartb caps for the MS mini.
 
Been Vapin,
  • Like
Reactions: SSVUN~YAH

Been Vapin

Fringe Class
Awesome. I thought it was you or @MGG , but could not find the post anywhere. Spent too much time looking for it lol

What other pieces do you use with your Sub from dhgate? I have a 14mm Apollo if it matters.
 
Been Vapin,
  • Like
Reactions: SSVUN~YAH

slick

Well-Known Member
Yingmin5 is a reputible vendor, I'm sure that glass will be nice and thick.

That piece though looks more setup for combustion than vaporizing. You'd probably only need enough water to cover the first perc

As @cybrguy mentioned, you should be able to remove the logo by using a cleaning solution called "Simple Green"

What's the difference between combusting and vaping in terms of glass?
 
slick,

Frederick McGuire

Aggressively Loungey
Awesome. I thought it was you or @MGG , but could not find the post anywhere. Spent too much time looking for it lol

What other pieces do you use with your Sub from dhgate? I have a 14mm Apollo if it matters.
I have a shit tonne of adapters
Edit:
1280.jpg
- So whatever piece I want :lol:

The FC-187 is very stable,
The FC-710 is flavor country, and The barrel to funnel is nic, but both of them arent too stable with the sub, so I use a 2nd piece to stand the sub in (I really want to make some kind of stand for it :science:)
 
Last edited:

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
The triple honeycomb is a bit excessive for vaping IMO. A lot of small bubbles means a lot of vapor/water touching, the terpenes (responsible for taste) are water-soluble and taste suffers with more and more filtration. Some people don't mind, I try to find a balance between enough water to cool the vapor without affecting taste too much. Terpenes are medicine too!! :bowdown::bowdown::bowdown:
 

Delta3DStudios

Well-Known Member
Accessory Maker
What's the difference between combusting and vaping in terms of glass?

For combustion, you want glass with multiple chambers, more diffusion, Ice pics, etc. You want to physically cool the smoke as much as possible.

For Vaporizing, there is a point of too much diffusion in which you are robbing your hit of all flavor. You want to moisturize the hit. Any amount of water will help. Low diffusion helps with flavor. For vaporizing, you need to find the proper level of diffusion for your vape.

For many, that's a simple perc, like an inline or something else which yields less bubbles. My matrix perc on the GB-187-S provides more diffusion, but helps smooth out the flavor for the massive rips I take off my E-Nano
 

mixchu69

Well-Known Member
I received my fc710. I don't know anything about diffusion pieces, but is there something at the bottom that rattles. It seems like something at the bottom of the diffusion tubes.

Edit: when I look at the piece, it look like it was made purposely like that and it's part of the function, but I don't know?

Edit2: I found it on the open source thread, glad my piece ain't broke.
 
Last edited:
Top Bottom