Cheap High Quality Bubbler

[vjt324]

lol @vapordab ...cuz microsofts all over FC lolll

@turdhole i have ordered from aifeng ....great quality piece. thick glass . relatively fast shipping to NJ

 

[turdhole]

so DHgate just released my payment to CCG even though the timer said i had 16 more hours. my 3rd (and hopefully correct) package is in transit. wtf dhgate?!

 

[ChippyMalone]

How about this newer model from Sunshinestore?

I'm considering it for pair with my new E-Nano. I'm looking for something in the foot tall or so range with a female 19mm inlet that can hold enough water to diffuse without overdoing it or splashing in my mouth. It also can't force me to have the E-Nano claustrophobicly too close to or touching my face or make me turn my neck uncomfortably downward. Also has to be very stable and rugged because I don't have the best balance or coordination.

Nothing I have is quite right since I didn't buy with the E-Nano in mind.

 

[flotntoke]

If looking to keep the nano off you face - like touching the tip of your nose - check out sidecars. It's my preferred solution. Still put her up on the D020 every once in a while. It's nice for the change of pace, but makes me feel a bit claustrophobic.

 

[Elevapor]

My inline to doughnut ashcatcher arrived from green buddah shop.

 

[ma0u]

i dont care too much for honeycomb but for some reason i like this one. has anyone ordered from aifeng0603 before?


also has anyone used this one?

http://www.dhgate.com/store/product/new-glass-bong-glass-water-pipe-glass-smoking/212764182.html

Thank you!! And wow, I was looking at that same piece just a few ago (read a few posts back), but I think it was shot down cause of the matrix perc not being connected to the bottom and having too much space below it?

Speaking of matrix percs, I am definitely getting ONE of yingmins GB-187:

http://www.dhgate.com/product/hot-sell-the-newest-glass-bong-glass-smoking/188885599.html
Though.. technically there is 3 different ones, correct?...
The one with the Roor label, one with the Mobius label (which, besides the label difference, seem physically the same), and then the unlabeled one (which appears to be a bit shorter, with perhaps a thicker mouthpiece and also a matrix perc that's more like the D020-D's).

Personally, I love my D020-D, but it seems theres quite some differences with the GB-187 labeled and unlabeled; all I care about is reliability, quality percolation and sturdiness.

That's why I've also been staring at the D020-2-W:

http://www.dhgate.com/product/d020-2-w-clear-glass-water-smoking-pipe-with/208893527.html
from sunshinestore's (currently lingering in my cart). I do already have the frit to turbine piece; however, no sidecar with that, and having a frit disc instead of a honeycomb is very different.

 

[turdhole]

is there a special way to try and negotiate prices on DHgate or do you just send the seller a message?

also anyone have any luck getting Kathy to lower prices?

 

[BOBCAT]

My order finally arrived today from ecigcenter.Two Do20s at $19.00 each.One of them is flawless,the other one looks like it rolled around on the floor for a while.Packing was really good,but they forgot to include both combustion bowls,not a big deal except one bubbler is for a friend who still combusts.For that price im not gonna bitch at them.

 

[turdhole]

i offered Oyglass $25 for this

he didnt go for it, he wants $50 for 1.

"oyglass 2014-11-15 09:29

How are you doing, This product no inventory.
If you have a need to individually tailor
You should pay at least $50 of our factory
oyglass 2014-11-15 09:35

This product is available"

 

[weenstoned]

that's what I got from Khatie today. It took 6 days. sadly she forgot to put a 14mm baby bottle in my order. EGG cool running. washes chamber inside. Fritted very good. diffusion is much better than in my fritted to turbine. but splashback is near, but never comes. Pendy rig has splash or goes dry. difficult to find the right position with it.

I think the baby bottle is not ready yet. I was first to order it, and though I did receive a tracking number a couple of days after it has not updated in nearly two weeks. The tracking number was also an express one which based on past experience should have been here by now. Will probably be messaging them soon.

i offered Oyglass $25 for this
he didnt go for it, he wants $50 for 1.

"oyglass 2014-11-15 09:29

How are you doing, This product no inventory.
If you have a need to individually tailor
You should pay at least $50 of our factory
oyglass 2014-11-15 09:35

This product is available"

Buy 3 and sell 2 for 30 bucks each to friends? You could probably even get 40 each and then have a 5 dollar bubbler.

 

[cybrguy]

Oy...

 

[turdhole]

Buy 3 and sell 2 for 30 bucks each to friends? You could probably even get 40 each and then have a 5 dollar bubbler.

that's an idea but i'm not reselling chinese shit, no offense....this is why my spending limit is >$40 on this stuff.

 

[olivianewtonjohn]

Thank you!! And wow, I was looking at that same piece just a few ago (read a few posts back), but I think it was shot down cause of the matrix perc not being connected to the bottom and having too much space below it?

Speaking of matrix percs, I am definitely getting ONE of yingmins GB-187:
http://www.dhgate.com/product/hot-sell-the-newest-glass-bong-glass-smoking/188885599.html
Though.. technically there is 3 different ones, correct?...
The one with the Roor label, one with the Mobius label (which, besides the label difference, seem physically the same), and then the unlabeled one (which appears to be a bit shorter, with perhaps a thicker mouthpiece and also a matrix perc that's more like the D020-D's).

Where did the idea come from that unlabeled and labeled GB-187 are different? I havent heard that, and labeled ones look the same as unlabeled to me.

 

[Stu]

Where did the idea come from that unlabeled and labeled GB-187 are different? I havent heard that, and labeled ones look the same as unlabeled to me.

I had heard someone comment about newer vs. older versions of the 187, but I don't think labels were part of the equation.

 

[olivianewtonjohn]

I had heard someone comment about newer vs. older versions of the 187, but I don't think labels were part of the equation.

Newer vs older design? Wow, time to search around; apparently I missed something

 

[BoogerMan]

I received a couple packages in the mail over the past few days The 187 is running a bit behind, but it will eventually get here.

CleanClearGlass (boooo!!!!) Dabuccino:
http://www.dhgate.com/product/sandblasted-starbuck-cup-dab-concentrate/210841438.html

Yingmin5 Ratchet Recycler:
http://www.dhgate.com/product/glass-bong-glass-water-pipe-smoking-pipe/210984071.html

Kathy0577 Barrel to Funnel:
http://www.dhgate.com/product/2014-new-glass-bong-9-quot-two-founction/212040293.html

All are very good quality (a few small bubbles here and there but thats it). I am very happy with all 3 pieces. These will definitely be staying in the collection.

Kathy and Yingmin5 had their normal delivery times for the barrel to funnel and the ratchet recycler. The dabuccino cup from CCG took about a month to get delivered.

I do not support CCG and I do not recommend them. I ordered a quad showerhead from them a couple months ago, and after being told by 2 different CCG employees that I would receive my item in clear, I was sent pink. And one of the 4 shower heads was bent pretty bad. The mouthpiece tube was welded a little low too, so water traveled up it easily. Buy from CCG at your own risk. However, I can confirm that the dabuccino rig from them is the best knock off I have seen so far for the price. I just wish a different seller offered the same one (Kathy's is nice, but I like the frosted top compared to her white top. And the other ones on DHgate with the actual logo on it have a very short mouthpiece so they aren't even usable).

Video of all 3 for your viewing pleasure

 

[PPN]

I recorded easy session with NC+PAX always on yellow, low temp. you can make volume quieter or louder. I also bent the the stand for NC for a few seconds. just found the first flexible clothes hanger in my closet. not so stylish, but completely stable.

i love it

Do you use the provided titanium tip?

It is very big, so it needs a long heating time and i'm afraid the titanium is expanding too much and crack the 14mm glass joint....

So I use a borosilicate tip and since it don't heat too much I can secure it with a clip!

 

[dabselector]

Do you use the provided titanium tip?

It is very big, so it needs a long heating time and i'm afraid the titanium is expanding too much and crack the 14mm glass joint....

So I use a borosilicate tip and since it don't heat too much I can secure it with a clip!

yes I use it constantly. I heat with not the largest of my torch, medium flame. there is a radiator on a nail, so is impossible to crack the joint. also impossible to drop down the nail. but I'm afraid boro stuff because it cracks all the time. dab tasty, smooth without coughing

 

[Delta3DStudios]

is there a special way to try and negotiate prices on DHgate or do you just send the seller a message?

also anyone have any luck getting Kathy to lower prices?

Yeah, very doubtful they will ever bargain for a single unit. I can't even get them to combine shipping!
If you did order in larger quantities of course they give you a discount

 

[Melting Pot]

I'm just sick of seeing origin post preparing shipment. ship it already I want my GB 187

 

[BoogerMan]

I'm just sick of seeing origin post preparing shipment. ship it already I want my GB 187

Same here! It's been like that since Nov 6th for me.

 

[Delta3DStudios]

Same here! It's been like that since Nov 6th for me.

Mine's still stuck - since october 31st!

 

[DieHard]

I ordered my GB-187 from @yingmin5 on 10/22 received on 11/1. And I love it!

 

[turdhole]

Yeah, very doubtful they will ever bargain for a single unit. I can't even get them to combine shipping!
If you did order in larger quantities of course they give you a discount

i hear ya. i just keep telling them i'm not buying in bulk without seeing the quality of a sample first.

 

[EverythingsHazy]

How about this newer model from Sunshinestore?

I'm considering it for pair with my new E-Nano. I'm looking for something in the foot tall or so range with a female 19mm inlet that can hold enough water to diffuse without overdoing it or splashing in my mouth. It also can't force me to have the E-Nano claustrophobicly too close to or touching my face or make me turn my neck uncomfortably downward. Also has to be very stable and rugged because I don't have the best balance or coordination.

Nothing I have is quite right since I didn't buy with the E-Nano in mind.

The Gb-186 is a really good match for the E-nano. Excellent diffusion, easy to clear, and very sturdy/stable. The nano isn't close to your face on the gb-186 at all either.