Cheap High Quality Bubbler

vapordab

vapordab

Medical+FC=Recreational
blankrider said:
Damn I also have one of those on the way from him. Now even if it arrives in one piece I am always going to be worried about it. If only I had waited a couple weeks and Kathy would have had it available for less and I never have any problems with her
Click to expand...


half of my collection came from her. The one time a piece had a bad defect she replaced it after I showed her pics

I know that many have had problems with Kathy, but not me.
 
weenstoned

weenstoned

Well-Known Member
olivianewtonjohn

olivianewtonjohn

Well-Known Member
TimSolo said:
I'm all in for long pulls =P. Really love the stem they added (Although I guess you could add it to most pieces) and the blue percs and mouthpiece look very nice too.

I'm kind of torn between the WP-1095 and the other one. I only have money for one and the only piece I have is the one in my profile pic. What would you go for in my place?
Click to expand...

You have gotten some good info already. I have this piece (similar, honeycomb perc and also 42cm):
http://www.thickassglass.com/collec...b-water-pipe-7mm-thick-w-spinning-splashguard

The above piece is great with the cloud+ but not so great with the solo (draw restriction). So it depends on your vape. Also if you dont mind less flavor but more diffusion. I would try to get a different splash guard though, im not a big fan of tree guards. Also I would do away with the downstem, should be plenty of diffusion already will probably just add unnecessary draw restriction.

If you only have the solo I would stick with smaller low resistance pieces.
 
calyx

calyx

Active Member
MGG said:
Wtf that's dodgy as fuck, problem in the tempering process yet he knowingly sends the dodgy batch out anyways. I wonder if I should contact him already and request a replacement.

Is it okay if we could see the actual back and forth conversations you had with him?
Click to expand...
Yeah I surprised that he just admitted that to a buyer without hesitation. Even if it goes well with the replacement I'm not sure i'll be using him again. Anyways, here's the convo verbatim.

Hi,

I saw it,sorry for it.I am worry thae cracks that alll products that I produced last time.

Friend,I am very very thanks that you let me know this information.which is very important with me,so that I can avoid problem that I am prodcuing for this item..

Without doubt,I must resend you the product.

If it is possible that pls help me and double make a order to me for another item,and I will send you 2 pcs(one is item that you will order,another is replacement items),becasue which let me save some shippingcosts.

Thnaks and best regards

Steven

Me: Thank you. I appreciate that you are willing to send a replacement. However, i'm not interested in buying any more items at this time. I would just like a replacement to be shipped of the original order.

Hi,

That is ok..I will resend you after 1 week..

Because I am thinking about the problem are from tempering for last lots.I must thow all products away,and reproduce new lots,so that I must control quality.

Thanks and best regards

Steven
 
NickDlow

NickDlow

Log Hog
I 100% agree that CCG is horrendous!!! I placed an order sept 7th for 3 pieces. I recieved one of the three oct 9th. I'm still awaiting the other 2!! But I will admit I did purchase the grav lab double coin recycler, but I swear that's the last one lol nobody else had it that I saw. I'll prob see that piece before the rest of the other order. But no more CCG for me
 
SnidelyWhiplash

SnidelyWhiplash

Well-Known Member
Just FYI... I got this
http://www.dhgate.com/product/glass-water-pipe-classified-glass-bong-diffuser/208988186.html

Dude.. Its a recycler. A really nice one! Keeps the main water chamber SUPER clean (really effectively pre-filters. Ill make a video later.
glass%20water%20pipe%20classified%20glass%20bong%20diffuser%20glass%20bubbler%20glass%20ash%20catcher%2018.8mm.jpg
 
TimSolo

TimSolo

Engineer and vaporizer aficionado
@Cannabis Connoiseur, thank you for the suggestion. I was leaning towards the smaller piece as well

@olivianewtonjohn thanks for the tips. I do indeed only have the solo. I found a variant of the WP-1095. Would you say this one is better because it has an additional perc acting as a splashguard? It doesn't have a bent neck though, not sure if I like that...
1.0x0.jpg

edit: I just noticed that this is a 14 mm joint so I can't really use that unless I pay another $ 30 for a GonG piece...
 
olivianewtonjohn

olivianewtonjohn

Well-Known Member
TimSolo said:
@Cannabis Connoiseur, thank you for the suggestion. I was leaning towards the smaller piece as well

@olivianewtonjohn thanks for the tips. I do indeed only have the solo. I found a variant of the WP-1095. Would you say this one is better because it has an additional perc acting as a splashguard? It doesn't have a bent neck though, not sure if I like that...
1.0x0.jpg

edit: I just noticed that this is a 14 mm joint so I can't really use that unless I pay another $ 30 for a GonG piece...
Click to expand...

Since you have the solo I say find a pipe that likely wont splash anyways and go without the splashguard. The draw is so restricted with the solo no chance of splash, you just have to be alittle cautious on the clear. I think its better to have to be cautious but get an easier draw. I used the D020 (regular) and it was a great pairing. Very portable, just perfect size for the solo. If you want alittle bigger I think the D020-D or GB-187 might be good options

SnidelyWhiplash said:
Just FYI... I got this
http://www.dhgate.com/product/glass-water-pipe-classified-glass-bong-diffuser/208988186.html

Dude.. Its a recycler. A really nice one! Keeps the main water chamber SUPER clean (really effectively pre-filters. Ill make a video later.
Click to expand...

I really like the design, im just wondering if my bong can handle the weight of that, the cloud+, and a 18mm y-adapter? And also wondering if the $ is worth the diffusion? Does it make a big difference?

I have never had an ash catcher, some things I have always wondered
 
olivianewtonjohn,
  • Like
Reactions: TimSolo
Cannabis Connoisseur

Cannabis Connoisseur

I LOVE LIFE
TimSolo said:
@Cannabis Connoiseur, thank you for the suggestion. I was leaning towards the smaller piece as well

@olivianewtonjohn thanks for the tips. I do indeed only have the solo. I found a variant of the WP-1095. Would you say this one is better because it has an additional perc acting as a splashguard? It doesn't have a bent neck though, not sure if I like that...
1.0x0.jpg

edit: I just noticed that this is a 14 mm joint so I can't really use that unless I pay another $ 30 for a GonG piece...
Click to expand...
I like the 1095 trust me the Tree does a marvelous job of being a slash gaurd. I've already spent the money this is a piece I tried to get others to see the potential of the1095 all i can say is if I'd have Hit it and then bought it I'd pay twice as much literally
 
olivianewtonjohn

olivianewtonjohn

Well-Known Member
Cannabis Connoisseur said:
I like the 1095 trust me the Tree does a marvelous job of being a slash gaurd. Trust me I've already spent the money this is a piece I tried to get others to see the potential of the1095 all i can see is if I'd have Hit it and then bought it I'd pay twice as much literally
Click to expand...
^Follow this guys advice, he has a large collection

EDIT: Only question @Cannabis Connoisseur have you tried that piece with a restrictive vaporizer? Or in general is that piece pretty low restriction?
 
Cannabis Connoisseur

Cannabis Connoisseur

I LOVE LIFE
olivianewtonjohn said:
^Follow this guys advice, he has a large collection
Click to expand...
It's modest at best. I keep forgetting Tim is using the solo, I still think the 1095 will work well with it. I just experimented and it takes a little more temp than i usually use on my Solo and little longer pull. Id get the GB 187 if available its a replica of the Mobius matrix ion and that's perfect for the Solo. However the 1095 is still a BEAST
 
TimSolo

TimSolo

Engineer and vaporizer aficionado
I'm very grateful for all the advice but you're not making things easier for me, lol! I'm terrible at deciding stuff like this. Anyway, what is the difference between the GB-187 and D020-D? Is the D020-D just a bit smaller with a smaller matrix perc? In that case I would prefer the GB-187, but I could only find the it in lots of 20 with Yingmin... Does he or anyone else ever sell them in singles? And why does the matrix perc pair so well with a solo?

Also, aesthetically I like the WP-1095 a lot more than both of the above. But in the end it does have to pair well with the solo because I'm not planning on investing in a cloud any time soon. I also came across the GB-228-F (I brought this up a few pages back) which was confirmed to be a great pairing for the solo as well...

I DON'T WANT TO CHOOSE!!!! :bang:
 
olivianewtonjohn

olivianewtonjohn

Well-Known Member
TimSolo said:
I'm very grateful for all the advice but you're not making things easier for me, lol! I'm terrible at deciding stuff like this. Anyway, what is the difference between the GB-187 and D020-D? Is the D020-D just a bit smaller with a smaller matrix perc? In that case I would prefer the GB-187, but I could only find the it in lots of 20 with Yingmin... Does he or anyone else ever sell them in singles? And why does the matrix perc pair so well with a solo?

Also, aesthetically I like the WP-1095 a lot more than both of the above. But in the end it does have to pair well with the solo because I'm not planning on investing in a cloud any time soon. I also came across the GB-228-F (I brought this up a few pages back) which was confirmed to be a great pairing for the solo as well...

I DON'T WANT TO CHOOSE!!!! :bang:
Click to expand...
Ok pick the GB-187 if you can find it. If not you either have to wait for yingming5 to restock or go with the D020-D (very similar just smaller, perc alittle higher and not welded); functionally I heard they are really close.

I think that other one you just posted would be higher resistance as well (generally frit perc are kind of restrictive). Could be the person you are citing did not mind it. But I personally do not find it as enjoyable
 
jambandphan03

jambandphan03

in flavor country
Here is a side by side of the two, D020=D and the 187, though I think now they are using the finer cut perc on the latest D020=D but this gives you some perspective, they both hit about the same IMO, 187 is just a bit taller, has a slightly larger can, and a bit more volume.
 
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
Nice! Very tempting That's the first cheap recycler I've seen that actually puts the perc ABOVE the recycling tube!

Hopefully we'll see this hit dhgate from some other vendors at a cheaper price

Nice find @ovrez !

--------

Anyone have any orders go through Chicago ISC instead of the usual Jamaica NY ISC location for this region?

Ordered last week from 3 different vendors and the first one to update shows Chicago ISC which is very strange, every order until now has always gone through Jamaica when using ePacket when ordering from DHgate with China vendors)
 
Last edited by a moderator:
Delta3DStudios,
MGG

MGG

Well-Known Member
Ratchett said:
Nice! Very tempting That's the first cheap recycler I've seen that actually puts the perc ABOVE the recycling tube!

Hopefully we'll see this hit dhgate from some other vendors at a cheaper price

Nice find @ovrez !

--------

Anyone have any orders go through Chicago ISC instead of the usual Jamaica NY ISC location for this region?

Ordered last week from 3 different vendors and the first one to update shows Chicago ISC which is very strange, every order until now has always gone through Jamaica when using ePacket when ordering from DHgate with China vendors)
Click to expand...

It's a step forward but check out their instagram video on the page
http://www.thickassglass.com/products/4-mini-reycler-dome-and-nail-included
The splashback seems pretty bad =[
 
charliedontsurf

charliedontsurf

Medical
I'm just posting here to say that both Kathy and DHgate service are appalling, and likely aren't worth your money. I've been trying to get a DEEPLY WELL DESERVED REFUND for about a month and these people give you a perfect example of how not to run a company.

Kathy? NO.

DHgate service? NO.

I have nothing but bad words and corrosive bile to give when queried about these professional entities.
 
Last edited:
OvaDaBong

OvaDaBong

Member
Last edited by a moderator:
You must log in or register to reply here.
Top Bottom