Cheap High Quality Bubbler

DieHard

DieHard

Accessory supplier
Accessory Maker
That one was covered a few pages ago.. Damn this thread moves
nemo said:
new one i think...

http://www.dhgate.com/store/product/2014-sep-new-recycler-glass-bong-smoking/209688146.html
temp2.0x0.jpg
Click to expand...
That one was covered a few pages ago.. Damn this thread moves fast.
 
xRUFUSx

xRUFUSx

special like everyone else
I bought
http://www.dhgate.com/product/new-come-glass-ash-catch-with-honey-comb/194447697.html
(thanks @ataxian ) with this adapter to interface with a http://www.dhgate.com/product/pinnacle-pro-glass-smoking-water-pipe-vaporblunt/184494946.html.

It would be nice if I could find one of those adapters with a slight (30-45 degree) angle for ergonomics and not to much to affect the function of the hydro tube.

I'm planning on making a function video when my kathy stuff gets here.

For fun I also picked up 10 of these for $20 (w/color requests). For when I'm stoned. See it's relevant.
21-models-spy-ken-block-helm-cycling-sports.jpg

The item "no longer exists" so here's a similar link.
 
Last edited:
F

flickyourbic

Well-Known Member






YQ-42 came in yesterday. I'm really liking it and have dabbed and combusted through it. However I am having a hell of a time with the water levels. I can get the matrix to perc beautifully but can never seem to get the honey comb right. Any suggestions?

Still waiting on the ashcatcher from kathy. It's been in limbo from San Francisco since the 20th, a little longer than Sunshine but I imagine it'll show up tomorrow. I'm going to wait to put my "review" in the dhglass thread.
 
rotax

rotax

Zaporist
Got my D020-D yesterday.
https://imgur.com/a/hTCev
znoNilO.jpg


It diffuses my vapor great. No irritation after hits. Takes a little bit of a pull to get the perc to fire with that water level. The perc definitely doesn't fire 'smoothly', it cycles around in a clock like pattern. The cuts aren't super precise/clean. I feel that the perc could sit lower, and require less water, and thus have less drag to initiate. I do like how easy/quick it is to clear; 18mm? small piece?

For the price, its good bang for the buck. But with the way the perc fires, they have some work to do.

EDIT: Per suggestions below on water level, I have found a level that has less drag, and still cools well enough.
 
Last edited:
MGG

MGG

Well-Known Member
rotax said:
Got my D020-D yesterday.
https://imgur.com/a/hTCev


It diffuses my vapor great. No irritation after hits. Takes a little bit of a pull to get the perc to fire with that water level. The perc definitely doesn't fire 'smoothly', it cycles around in a clock like pattern. The cuts aren't super precise/clean. I feel that the perc could sit lower, and require less water, and thus have less drag to initiate. I do like how easy/quick it is to clear; 18mm? small piece?

For the price, its good bang for the buck. But with the way the perc fires, they have some work to do.
Click to expand...

You got too much water in that piece imo.
 
weenstoned

weenstoned

Well-Known Member
No I kind of want to though since they have stereo matrix with a roor logo for less than yingmin wants for a mobius labelled one (at least when shipping to canada is factored in). Just not sure I want to order outside of dhgate which has buyer protection.
 
weenstoned,
Baked55

Baked55

Well-Known Member
flickyourbic said:
YQ-42 came in yesterday. I'm really liking it and have dabbed and combusted through it. However I am having a hell of a time with the water levels. I can get the matrix to perc beautifully but can never seem to get the honey comb right. Any suggestions?

Still waiting on the ashcatcher from kathy. It's been in limbo from San Francisco since the 20th, a little longer than Sunshine but I imagine it'll show up tomorrow. I'm going to wait to put my "review" in the dhglass thread.
Click to expand...

I usually have the water just below the honeycomb to get it to fire good. I just try not to pull to hard or some water can get pulled into the top perk and then it won't fire anymore
 
Baked55,
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
Dangus

Dangus

Yeah, well, that's just, like, your opinion, man.
alltoreup

alltoreup

Damn you, party liquor
^^^ and not even a glimpse of what their copy looks like. What kind of Perc is on that second recycler? If that's one of those crazy stem Percs I've seen recently, there's no way they come close to copying those. Off to YouTube to check out the real one

Edit...haven't found one yet
 
Last edited:
alltoreup,
MGG

MGG

Well-Known Member
alltoreup said:
^^^ and not even a glimpse of what their copy looks like. What kind of Perc is on that second recycler? If that's one of those crazy stem Percs I've seen recently, there's no way they come close to copying those. Off to YouTube to check out the real one

Edit...haven't found one yet
Click to expand...

nah, no way there's would even come close to being that clean imo..
I'd be curious to see someones review of the recycler.
 
oli

oli

Well-Known Member
oli said:
So I finally received two of the 4 pieces ordered on the 18th of Aug and received on the 22nd of September, so Europeans patience is the essence but wonderful is the reward

This is a photo of them both next to the GB187 for your pleasure.

Just opened the packaged and both of the pieces are in good nick, 3 (see above photo) is much taller than expected, it has the down stem a little skewed and the base seems kinda thin, definitely not one for the clumsies :ugh:, I love the mouth piece, the lips have a nice ledge to rest on. the slits on the Reti perc are not all at the same level but seemed to be polished. On both items the ground joints are nice and tight. small bubbles are in and there but nothing to cry about.

If anyone wishes I'll try to get a vid out of number 3 (Reti perc) as the Ratchet has been covered a few times but I can't recall any of the other.

N4kteYH.jpg
Click to expand...

olivianewtonjohn said:
I wouldn't mind a video of the reti :ninja: and possibly a link.....just sayn :ninja:
Click to expand...

So I finally managed to upload a couple of videos of this Phallic bubbler.

First of all as always when a new bubbler comes through my door I’m always so eager and full of expectations to give it a shot and always a little disappointed when all it really does is making bubbles :doh:

So first impression, I do like the way it sits, smooth, erected and proud. It wasn’t actually till I shot it that I realized this bubbler was so Cockylike .

I feel that the perc sits a little to high in the bottom chamber or rather that the actual chamber should have been a little taller, as I feel the bubbles get trapped somehow and are not able to develop thus creating a displacement of water/large bubbles as opposed to a myriad of tiny bubbles, which I do prefer.

Could that be the reason that it does not pull vapor that easily if I compare it to the beloved D020 which is half Retilike. I really have to give it some in order to get a decent cloud going which I’m not keen on.

So do I like it, yes I do, but it won’t end up been one of my favourites!

But time will tell as one of the lessons I have learned is that the use of bubblers can be very subjective, my reaction/feeling changes depending on which bubbler I used last.

So is it worth the money, for $34 or 25 Euros shipped, yes it is, to me anyway. Of course I would love to try a reel Reti next to it.

http://www.dhgate.com/product/glass...ipe-with/194444510.html#myaccount_left-2-null

Anyway enough chat


 
ataxian

ataxian

PALE BLUE DOT
flickyourbic said:






YQ-42 came in yesterday. I'm really liking it and have dabbed and combusted through it. However I am having a hell of a time with the water levels. I can get the matrix to perc beautifully but can never seem to get the honey comb right. Any suggestions?

Still waiting on the ashcatcher from kathy. It's been in limbo from San Francisco since the 20th, a little longer than Sunshine but I imagine it'll show up tomorrow. I'm going to wait to put my "review" in the dhglass thread.
Click to expand...
Take it for whats its worth:

The bottom chamber level looks good to me!

The Top chamber looks a bit high?
115%

Try 75% then add until you find your sweet spot.

Some of my water rigs work best with water level low side of the perc line.

My take?
 
ataxian

ataxian

PALE BLUE DOT
xRUFUSx said:
I bought
http://www.dhgate.com/product/new-come-glass-ash-catch-with-honey-comb/194447697.html
(thanks @ataxian ) with this adapter to interface with a http://www.dhgate.com/product/pinnacle-pro-glass-smoking-water-pipe-vaporblunt/184494946.html.

It would be nice if I could find one of those adapters with a slight (30-45 degree) angle for ergonomics and not to much to affect the function of the hydro tube.

I'm planning on making a function video when my kathy stuff gets here.

For fun I also picked up 10 of these for $20 (w/color requests). For when I'm stoned. See it's relevant.
21-models-spy-ken-block-helm-cycling-sports.jpg

The item "no longer exists" so here's a similar link.
Click to expand...
I like this ash catcher a lot.
Their are so many configurations!
I ordered more adapters!
Thank you for the link!
 
ataxian,
  • Like
Reactions: xRUFUSx
comeatmebro

comeatmebro

Active Member
Does anyone have a recent tracking number they can share?


Basically I am extremely impatient and obsessive. I have been checking the USPS tracking number since I got it. My package has left Chicago at 2am Monday morning and I have since gotten no updates. I'm annoying loved ones with how often I check the tracking info.
 
comeatmebro,
You must log in or register to reply here.
Top Bottom