Cheap High Quality Bubbler

E

exit

Well-Known Member
I'm getting ready to make another order of Chinese glass soon from sunshine store and maybe some others.

I am having difficulty finding good looking recyclers that are not super tiny and 10mm.
 
exit,
S

Submisfit

Well-Known Member
Submisfit,
  • Like
Reactions: Zebowski
MGG

MGG

Well-Known Member
You know what guys, we talk about dhgate here a lot but I thought i'd link you guys another glass blower from US I really recommend.. his rates are incredibly incredibly fair especially for his tykler recyclers (which function really well!) https://www.facebook.com/pages/A-Gl...ustom-Glass-Novelties/141517799219143?fref=ts

Check him out, say Marcus sent you :p



Submisfit said:
Why's that? Adapters cost less than dinner at Panera. http://www.dhgate.com/product/2pcs-...dapter-jiont/196104757.html#s1-8-1|1434739286
7.77 usd from dhgate will turn it into an 18mm male.
Click to expand...

I already have too many adapters haha, I don't want to keep having to buy specific adapters just for 1 piece. Also that piece would require me to use a 2nd adapter on top to make it female.
 
S

Submisfit

Well-Known Member
http://thick-quality-glass.myshopify.com/collections/accessories/products/14-to-18mm-adapter
5.99 usd from an American store. Why can't you just have a few interchangeable adapters? I only have pieces in 14.4 or 18,8, and there really aren't that many combinations that can be made.
14M-14F/18M/18F=3
14F-18M.18F=2
18M-18F=1
(n-1)!=3*2*1=6 potential combinations. If you're comfortable using two adapters at once, you could get away with (n-2)!=2.

EDIT: To the poster above who I can't editquote: that guy's etsy store mostly contains "adult massagers." Does he have a separate one with "tobacciana"?
EDIT2: Nevermind. I see that their store says in the extended description that etsy asked them to take down 420 items.
 
Last edited:
Submisfit,
  • Like
Reactions: exit
ou812?

ou812?

Well-Known Member
I already have too many adapters haha, I don't want to keep having to buy specific adapters just for 1 piece. Also that piece would require me to use a 2nd adapter on top to make it female.
A DOUBLE F/M 14>18 MM Will fix that pronto and from there you can buy any rig with a male fitting be it 14 or 18 due to the flexibility of the adapter
Click to expand...
Click to expand...
 
Last edited:
ou812?,
  • Like
Reactions: BOBCAT
ma0u

ma0u

frozWn Member
I got some of my new pieces. I am loving the D022, the 4 tire birdcage piece next to that one and the D020-D most. The 10 inch frit to cyclone is great but if you don't pull hard enough to enable the vortex perc then it will be a harsh hit.

54H1m1R.png

lxb4dP7.png
 
MGG

MGG

Well-Known Member
ma0u said:
I got some of my new pieces. I am loving the D022, the 4 tire birdcage piece next to that one and the D020-D most. The 10 inch frit to cyclone is great but if you don't pull hard enough to enable the vortex perc then it will be a harsh hit.
Click to expand...

I just ordered the frit to cyclone, i'm surprised frit is still harsh unless it reaches the vortex perc, i'm also surprised u'd have to pull too hard to get the vortex going, it seems like a pretty short distance.
 
Last edited:
MGG,
  • Like
Reactions: ataxian
S

Submisfit

Well-Known Member
MGG said:
I just ordered the frit to cyclone, i'm surprised frit is still harsh unless it reaches the vortex perc, i'm also surprised u'd have to pull too hard to get the vortex going, it seems like a pretty short distance.
Click to expand...
In my personal experience with friend's glass, most vortex percs are built for a smoker's drag. We tend to draw more slowly when we vape. A lot of the time I can milk a friend's piece with a vortex, or I can make the vortex work well with thinner vapor. Not both.
 
MGG

MGG

Well-Known Member
I guess i'll have to do my own tests when mine arrives :science:

EDIT : I don't know if anyone has brought these guys up before but here's another company thats
spewing out some SUPER cheap glass
http://www.bakebros.com/


also I found this guy who says he's going to put out water tests of the 10inch frit to turbine soon if anyone is interested in that
 
Last edited:
MGG,
  • Like
Reactions: ataxian
ma0u

ma0u

frozWn Member
MGG said:
I just ordered the frit to cyclone, i'm surprised frit is still harsh unless it reaches the vortex perc, i'm also surprised u'd have to pull too hard to get the vortex going, it seems like a pretty short distance.
Click to expand...
The more glass contact the vapor has without perc or diffusion, it begins to then condense. Like @Submisfit said (or I think he said), you hit it and the barrel fills up with a milky vape (that isn't spinning), which usually ends up as a coughers dabs when you don't get the vortex in full throttle. When the vortex is working though you can feel that rumble and it works great- You just have to make sure the spin is going!
 
alltoreup

alltoreup

Damn you, party liquor
My ratchet recycler tracking number from Kathy finally became legit on USPS tracking. Says it was accepted in China today. At least it's finally on the radar.
 
VANVAS

VANVAS

Well-Known Member
Hi!
Just i received a couple of days ago my piece
Ocszyo9.jpg

I LOVE it , im testing it but i love it , the bubble sounds very soft and i like it , the mouthpiece fits in my mouth very good so... I think will not the last glass...lol , i have to ask you @ataxian , and you people!!! i have the verdampftnochmal gong , fits well but i think the amount you can add is shortly , anyway, how many hits you take with 1 load? I get 3-4 decents milky vapor but no more later decrase and i believe no finished the 12 minutes session , my lasts buds aren't very good cause are the down parts from the plant but my opinion is that in this mode with bubbler , you spend more grass than simple vape , i save this AVB from bubbler to get 1 bag at 230c in the EQ with light vapor , maybe with other bud parts and other good strains can get more vapor???

Thanks !
 
Last edited:
ou812?

ou812?

Well-Known Member
hey all, did any of you get a 10$ coupon for referrals? dayum we could all get another 10$ discount, we should figure how , PM each other I guess, hope Im not breaking rules or anything if so shit can it.
 
ou812?,
  • Like
Reactions: exit
Rrose Selavy

Rrose Selavy

log enthusiast
still love that ball rig. i dont think have seen jh017 before..... has anyone actually bought a piece from that seller
 
Rrose Selavy,
Cannabis Connoisseur

Cannabis Connoisseur

I LOVE LIFE
For all those interested the EVO has 3 more days left on MASSDROP for $450 plus $11 shipped thats $309 off original price!!!! I just thought the Bargain Gang might want in on this before its too late
 
Cannabis Connoisseur,
ou812?

ou812?

Well-Known Member
mine comes up on the usps radar, now it will have a status of limbo without any alerts until it hits US and for me lately it arrives without an alert that its in my area (last rig). its nice for a surprise to come home and see the cheap cardboard box waiting but at the same time I like being able to know its whereabouts JIC it doesnt make it to my address.Got her recycler and a hammer shower head pipe for a travel piece for solo,change off from the pnwt k.o.Also that 7 inch sidecar with the unknown type of perc. nail dome adapter and burnie bowl for $23 perfect vape rig for me, compact can, center intake, no over kill diffy, nice flava rig ,beefy build great for launching old men into stratosphere :freak:

temp2.0x0.jpg



temp2.0x0.jpg



new-glass-hammer-bubblers-blue-color.jpg
 
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
@ou812? please let us know about that mysterious perc! I'm really curious about that design, but not enough to pull the trigger on it

(I constantly need to remind myself - "I have enough glass for now, I don't need anymore!")
 
ou812?

ou812?

Well-Known Member
Ratchett said:
@ou812? please let us know about that mysterious perc! I'm really curious about that design, but not enough to pull the trigger on it

(I constantly need to remind myself - "I have enough glass for now, I don't need anymore!")
Click to expand...

Im thinking (I do that once in a while:ko:)its gotta be like a shower head in a way, round with slits placed around,except they grouped them instead, Ive never seen this perc either, any where! ,bet it was designed by mistake and they found out it works. I have a rig thats a 4 way mini inlines.Each arm has 3 slits,its a Kathy piece, an early learning curve w/the perc 4 ft off the bottom of the can :lol:(1/2 on a can of 7 inches) its a bit chuggy, not too bad, but its there, but good tasting cloud maker,I feel this may be similar, will report. Is it green in the pic or is it done like old coke bottle glass color? I cant tell:shrug:www.dhgate.com/product/two-function-18-8mm-glass-water-pipe-glass/203162543.html#myaccount_history-3-null
 
You must log in or register to reply here.
Top Bottom