Cheap High Quality Bubbler

bossman

bossman

Gentleman Of Leisure
I'm looking to get a second bubbler to add to my D020. The D020 serves me well; I'm just indulging. I guess something that rips flower well with the Tubo X would be my top priority.

I'll be using it with the usual suspects:

Tubo X
Solo II
Fury 2
OmniVong
Splinter
Fierce once it arrives
 
Last edited:
bossman,
LesPlenty

LesPlenty

Well-Known Member
Company Rep
I like my D020-d better than my D020 in a few different ways, a little bit thicker glass, a bit bigger mouth piece flare and a smoother perc action, that being said, I have only been using my FC-Mod for the last couple of weeks,
https://www.dhgate.com/product/2015-new-34-5cm-height-glass-bong-with-matrix/255741536.html
rBVaJFkP2jGAYdW1AAeKZ6SgNlY955.jpg

I have been using it with a different mouthpiece, better when sitting in a recliner,
https://www.dhgate.com/product/19cm-long-glass-mouthpiece-female-18mm-flared/408547912.html
19cm-long-glass-mouthpiece-flared-end-vapexhale.jpg

One of the best features of this set up is being able to pull it apart and put it in the dishwasher each night to clean, too easy.
You can also swap the percs around to change things up!
The ashcatcher also works well with a sherlock J-hook.
I mainly use it without the asscatcher most of the time.
Another good point is if you accidentally break something, you can purchase most parts separately.
 
Hogni

Hogni

Honi soit qui mal y pense
Same as me. Have mine nearly exclusivly in use since 3 months. But w/o the ash catcher. That setup is too much for my liking. Love bubblers with seperate components you can mix and match. It delivers much more diversitiy - and replacement is cheaper in case of an accident. Similar as the Sheldon Black (clone). Suggested to Steven to offer some more other shaped mps. Unfortunately he offered the angled one only, you have pictured. Wanted some other, smaller mp tips too, snake heads and so on, the stuff @ataxian likes so much.
 
LesPlenty

LesPlenty

Well-Known Member
Company Rep
Hogni said:
But w/o the ash catcher
Click to expand...
Me too, I hope to use the ashcatcher with my j-hook more, once my keck clips show up!
I have been looking at that Sheldon knockoff too.
@Nina I highly recommend it for your collection, once funds allow.
Also, the perc`s in my piece sit really low compared to the pictures.(which is good)
 
LesPlenty

LesPlenty

Well-Known Member
Company Rep
If the D020-d was as easy to maintain as the FC-mod or had a decent bend in the neck, it would be my daily driver, but the FC_mod + interchangeable parts + dishwasher maintenance gets the win, by a hair!
That being said, I have contacted Yingchin5 about getting the following with a very pronounced bend in the neck of it so it is easy to use while reclined, it is a great cheaper unit, it does not say it is a D020-d, so maybe it`s a knockoff of a knockoff(pics look identical) ;

https://www.dhgate.com/product/new-...ng-glass-smoking/199386677.html#mfavit-7-null

rBVaSVtHBJqANy1oAAFjbTLVmcE546.jpg

He told me to just leave a message when I buy, he said to say,` Make sure it has a good bend in the neck' and they would pick the appropriate one for me. If you are going to use on a table etc, forget what I just said.:tup:
The FC-186 would shine with something like a Plenty or Newvape Vrod/SH, more free flowing vapes, that is just a guess, I have the same perc but a single in my sidecar and that is what I am working off.
 
Last edited:
LesPlenty

LesPlenty

Well-Known Member
Company Rep
felon167inc said:
now you have me choosing between this and a d020-d...lol
Click to expand...
It is exactly the same, well as close as handmade stuff can be, the one I pictured above has the same perc as mine, only difference, mine has an almost straight neck, go on get it and if you are anything like me, you will purchase more before it even arrives. I did this for the first half a dozen, I am slowing down a bit now.
With the money you save getting the cheaper option, I would definitely invest in this as well;
https://www.dhgate.com/product/14mm-and-18-8mm-clound-buddy-y-adapter-with/410261424.html
14mm-and-18.8mm-clound-buddy-y-adapter-with-plug-style-carb-male-to-both-female-joint-for-water-bongs.jpg

I could not imagine not using one of these again, too civilised, a must have IMO. You have to buy 2 but that is good for experimenting/whitey making.
 
Phenix

Phenix

Well-Known Member
1@felon167inc mind linking me? there are some offers right now is there something one of you likes to use personally on sale now?

i want to setup a bed-vape. recommendations for glass? whip is safer. so fc187/186/ufo. !?? "whats up with the gb186 from sunshinestore? help js appreciated 2
 
Gonzo_Dabs

Gonzo_Dabs

Well-Known Member
I have a Grav labs hammer bubbler. I love it. Big enough to be a good hitter but small enough and with a simple shape that it's portable and easy to store. The little diffused downstem is nice for a small piece. I've had it for a couple years as my only piece and it's been awesome.

Now it's time for some larger pieces for the house.
 
D32320

D32320

Noob Saibot
bizwaxzion said:
I'd like to see a vid - I've had that piece on my favorite list for a while. @D32320, what vape will you be pairing with it?
Click to expand...
Right now just using the old banger and torch, with a quartz insert. I figured since I’m already ordering, I might as well get the new opaque bottom style banger and insert. I have a Saionara Atomizer that I would love to play with if I got the right adapters.
 
bizwaxzion

bizwaxzion

Enigmatic Cannabist
I think you will like it for banger use - should be a nice little jammer. I've got a handful of china bangers, but I've been using a 710coils opaque banger for the last couple weeks and like it a lot.
 
bizwaxzion,
  • Like
Reactions: Hogni
LesPlenty

LesPlenty

Well-Known Member
Company Rep
I have been looking at this one lately;
https://www.dhgate.com/product/leis...e-bong-5-pillars/399210853.html#mfavit-1-null
Only reason I have not purchased is maintenance, it looks like a pain to clean but it purrs so nice with the cone in for resistance.
I have also ordered this;
sheldon-black-glass-bong-six-shooter-bubbler-smoking-water-pipe-with-removable-mouth-piece-bent-neck-arm-tree-downstem.jpg

Nice and easy to clean and mix and match with my other glass, no link as it is a knock off,but there are clues in the pic if you want to go searching. Just after I ordered this one I spotted the following;
15-inch-glass-bubbler-bongs-6-tree-arm-perc-glass-smoking-water-pipe-percolator-hookah-shisha-heady-glass-bong-pipe-divided-style-hot-sale.jpg

Same thing but looks nicer, if I like the one above I will get it too.
 
LesPlenty

LesPlenty

Well-Known Member
Company Rep
bizwaxzion said:
It needs a pretty good draw rate
Click to expand...
Cool, no worries on that point yet, I was looking for a piece to go with an Auber PID controller, flat coil and sic Halo dish I am looking at getting to try dabbing.
What is every ones favorite dab bong, any links/suggestions are welcome.

Edit, To ask every one.:tup:
 
Last edited:
canj00digit?

canj00digit?

All my days in a daze...
LesPlenty said:
What is your favorite dab bong, any links/suggestions are welcome.
Click to expand...

I know you didn't ask me, but I feel chatty so I thought I'd answer.

I've been purchasing from DHGate since the start of this thread basically and even was reselling pieces locally for a bit so I've had my hands on many different pieces.

Still my favorite dab rig ever is the FC-710 Bates&Worm Diffusion Pump knock off... it's often recommended here and for good reason... just brilliant function. Great cooling, fantastic flavor because there's minimal diffusion or even contact with the water by the vapor. Plus, there is very little free space in the can to collect reclaim. It's the most potent dab rig I've ever hit because so few actives are lost.
https://www.dhgate.com/product/2015...water/216674730.html#s1-2-7b;searl|1061552391

I've got a few heady pieces that I wish functioned as well as this piece so I'd use them more often.
 
Roth

Roth

Pining for the Mountains
canj00digit? said:
I know you didn't ask me, but I feel chatty so I thought I'd answer.

I've been purchasing from DHGate since the start of this thread basically and even was reselling pieces locally for a bit so I've had my hands on many different pieces.

Still my favorite dab rig ever is the FC-710 Bates&Worm Diffusion Pump knock off... it's often recommended here and for good reason... just brilliant function. Great cooling, fantastic flavor because there's minimal diffusion or even contact with the water by the vapor. Plus, there is very little free space in the can to collect reclaim. It's the most potent dab rig I've ever hit because so few actives are lost.
https://www.dhgate.com/product/2015...water/216674730.html#s1-2-7b;searl|1061552391

I've got a few heady pieces that I wish functioned as well as this piece so I'd use them more often.
Click to expand...


And if you don't want to deal with a male joint (I certainly don't), Stephen also has this version:

saml-glass-21cm-tall-glass-bongs-glass-smoking-pipes-diffusion-pump-with-ball-joint-size-18.8mm-pg5030(fc-rattle-can).jpg





I plan on picking up the FC-Rattlecan (above) at some point, just haven't yet.
 
You must log in or register to reply here.
Top Bottom