Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

[YaMon]

Alright I need help. My Flowerpot just showed up on my door. I tried getting it together. I think I got it but there are still moving parts so I’m assuming I did it wrong. Can anyone point me in the right direction. It’s a Showerhead btw

Check this video: NewVape FlowerPot Twax Vaporizer

 

[Grifo]

It’s only 3 pieces. The Showerhead. The heat shield. And the piece that has their logo and made in USA. The coil has wiggle room and I can’t get the bowl to even be close to work.

yep i know i have 2 flower pots. Parts is plural so i was wondering what else was moving. Im assuming you have the adjustabowl? I cant help you with the bowl since i have the older one. The coil should be snug with the coil cover, btw its a cover it doesn't shied the heat so you will get burned. You might have a shower head with a longer center post. Can you take pics for us?

EDIT: if you installed everything like the video then its because it has a longer center post or your coil might be too small.

 

[Ryanraptor2011]

yep i know i have 2 flower pots. Parts is plural so i was wondering what else was moving. Im assuming you have the adjustabowl? I cant help you with the bowl since i have the older one. The coil should be snug with the coil cover, btw its a cover it doesn't shied the heat so you will get burned. You might have a shower head with a longer center post. Can you take pics for us?

EDIT: if you installed everything like the video then its because it has a longer center post or your coil might be too small.

Just saw the video after the post. Helped a lot. I have the shovel head bowl. I think I figured it out. I didn’t know that you basically just used the screw to pinch the two parts together. Only thing I’m worried about is when I set it up the right way is smelled like burning and some visible smoke was leaking from it. I just let it do it’s thing. I think it stopped but just want to make sure I don’t mess anything up.

 

[Grifo]

ah nice haha well at least its working. It could be oils burning up or the coils were dirty. You might also hear some clicking noises when its heating up.

 

[Ryanraptor2011]

ah nice haha well at least its working. It could be oils burning up or the coils were dirty. You might also hear some clicking noises when its heating up.

Oh ya! It’s definitely working. And it’s putting me on my ass. I went from 680 one bowl. Then to 630 halfway thru the bowl I did a dab of cbd isolate. So smooth and terpy. Made my mouth water like a sour gummi. I’m smoking on Gelato rn. Went Down to 555 with cbd in the bowl. Omg. Like 8/10 rips. 1 stir. So fucking good. Gonna go up to 700 and try what I’ve been reading on here.

 

[Grifo]

Oh ya! It’s definitely working. And it’s putting me on my ass. I went from 680 one bowl. Then to 630 halfway thru the bowl I did a dab of cbd isolate. So smooth and terpy. Made my mouth water like a sour gummi. I’m smoking on Gelato rn. Went Down to 555 with cbd in the bowl. Omg. Like 8/10 rips. 1 stir. So fucking good. Gonna go up to 700 and try what I’ve been reading on here.

hell yeah! My sweet spot is 630-650 capped.

 

[muunch]

I actually been up at 680-700 the past few days after trying 777 for that one night. Really nice, but a bit harsh, and def only gotta pack enough for one hit. 620-640 is a bit more flavor, and the bowl lasts like 2-3 more hits, but the intensity of higher temps is nice, and one and done speed ripping bowls back-to-back is really great way to get baked quick.

I don't bother with the carb cap for flower still.

 

[lazylathe]

Controller set at 663F and ripping through nugs like a Cookie Monster!
Full flavor for 2 to 3 rips and then crumble and another 2 rips with fair flavor.
The first 2 hits are so tasty!!

I have to try and train myself away from dense vapor and just ride the flavor for much longer!
The clouds are just so satisfying though...
I will sacrifice a bit of flavor for those big ass clouds!!

 

[HD Springer]

Had a friend stop by after wk this morning and we had the fp cranking. I have the WA attached right now. So we were doing double deckers at lower temps and then cranking it for single extraction hits. I loaded him a last one and me being super lit tried to take a second hit from that same load and then FIRE!!! Wtf was I thinking. Oh ya I’m pretty sure I wasn’t. At least not properly.
Note to self never ever go back for a second go when the controller is set at 900.
What a way to end a Friday work day. And I couldn’t of slept better today also.
I usually run my set up around 650 uncapped for flower when I’m just chillin.

 

[Larrytargeteye]

Morning everyone .can someone confirm for me that i will be good to go if buy this list of stuff.i think this is the way to go for me as i live in the uk.

1 showerhead set(showerhead,nut and coil cover)
1 showerhead carb cap
1 panhead male bowl
1 coil and controller bought from dhgate(the one recommended by newvape and people on here)

With those 4 items i am fully equipped to start twaxing arent i?.
Thanks for any info.

 

[Shooby]

I'm about to order one of the NewVape grinders.. I can't decide which one to get. I like the look of the engraved ones better, but I'm wondering if they're difficult to use? They seem quite thin. Can anyone comment on it? @Shooby ?

I have read some folks with hand issues having had trouble using it as they couldn't get a good grip. Basically not getting enough grip to rotate it as the fine grinder is fairly thinner than the arm band grinder.

I personally like the feel of the fine grinder and the look and I have not had any problems using it at all. The rubber on the arm band along with the extra thickness gives you more grip.

Morning everyone .can someone confirm for me that i will be good to go if buy this list of stuff.i think this is the way to go for me as i live in the uk.

1 showerhead set(showerhead,nut and coil cover)
1 showerhead carb cap
1 panhead male bowl
1 coil and controller bought from dhgate(the one recommended by newvape and people on here)

With those 4 items i am fully equipped to start twaxing arent i?.
Thanks for any info.

Not fully but the minimum.

I would add a double woven to screen, stand with post , enail holder and pax loading tool and your set.

 

[Larrytargeteye]

Not fully but the minimum.

I would add a double woven to screen, stand with post , enail holder and pax loading tool and your set.

Sounds like i 100% need a screen but didnt see these on the website.what is the difference between a stand and post and an enail holder?i can definitely do without things like loading tools though.you get charged far too much money for things like that.i bet i could make a stand with a holder as well without too mucb effort.what parts suffer ware and tare?

 

[HengefulOne]

Just picked up a Flowerpot with showerhead off of the classifieds, planning on using with herb only for now. Would 650f be a good starting temp?

Thanks for your input.

 

[invertedisdead]

Just picked up a Flowerpot with showerhead off of the clasifieds, planning on using with herb only for now. Would 650f be a good starting temp?

Thanks for your input.

Sure!
IMO, of course
500-600F Terp Town
600-700F Usable Range
700-800F Crushville (aka Sport Mode)

All uncapped!

 

[Vitolo]

Just picked up a Flowerpot with showerhead off of the classifieds, planning on using with herb only for now. Would 650f be a good starting temp?

Thanks for your input.

I used principally flower with the showerhead set-up, and I used it at 650 every time.
650º +Showerhead + Herb only= Heaven on Earth.

 

[Justpassedu]

Just picked up a Flowerpot with showerhead off of the classifieds, planning on using with herb only for now. Would 650f be a good starting temp?

Thanks for your input.

Great starting point , it’s actually one of my go to temps for both flower & Concentrate sometimes . Best of luck fp is a beast .

 

[HengefulOne]

Welp, just did my first run. The flavor... I have had this strain in jars for over a year and never with any other vape did I get the extreme citrus undertones. Its amazing. Im a micro doser so it will take me a while to put it through its paces and I cant wait.

 

[Alexis]

Good evening/afternoon everyone, hoping it is a marvelous one for you all.

Get this guys- my mum has only used her Showerhead about 4 or 5 times so far.

She is a 67 year old ex-hippy pensioner in very good health. She has only used vaporizers very occasionally over recent years, she has just never taken to it despite my efforts and encouragement.

She has been primarliy resorting to our homenade canna-coconut oil daily.
Now she is telling everybody, emphatically that...

THE FLOWERPOT HAS CHANGED HER LIFE! She is astonished at how marvellous the experience and enjoyment is, and equally the all round health and medical benefits that she was immediately aware of.

What else can I say?

Except-

 

[Larrytargeteye]

Good evening/afternoon everyone, hoping it is a marvelous one for you all.

Get this guys- my mum has only used her Showerhead about 4 or 5 times so far.

She is a 67 year old ex-hippy pensioner in very good health. She has only used vaporizers very occasionally over recent years, she has just never taken to it despite my efforts and encouragement.

She has been primarliy resorting to our homenade canna-coconut oil daily.
Now she is telling everybody, emphatically that...

THE FLOWERPOT HAS CHANGED HER LIFE! She is astonished at how marvellous the experience and enjoyment is, and equally the all round health and medical benefits that she was immediately aware of.

What else can I say?

Except-

I told my dad months back that i 'honestly didnt SMOKE weed anymore' and then about 2 weeks back i told him what i meant by that and asked him if wanted to try it for a sleep aid....i seen the cogs turning in telling you!!!ill try him again when hes sat awake at 3 in the morning when his will is weaker hahaha

 

[YaMon]

#FlowerPower!

 

[psychonaut]

I'm going in on some dabs, got the wraparound setup going at 580F carb capping, sapphire halo with the last bit of jack skellington x buddha's delight rosin. Cleaning out the old stash making way for new! Maybe some double deckers for the vikings game =)

 

[HengefulOne]

Some pages back noticed some users had used glass bowls, whats the verdict on that? Worth doing? And if so what ones are recommended?

Thanks

 

[Shooby]

Some pages back noticed some users had used glass bowls, whats the verdict on that? Worth doing? And if so what ones are recommended?

Thanks

The verdict is we are all still waiting for newvape to make an official one but it's not that easy according to them. So some people such as myself drove around town and look for glass bowls that will work.

Is it worth it? Yes imo. Maintenance is a bitch tho as I have to keep the glass screen clear. Taste is smoother and cleaner. A bit more terpy taste.

Which one is recommended? Any one you can find that fits. Most are china made bowls. Looking online won't really help as you gotta try and see if it fits. If you can't find any, DM me as I have a clear and a colored (green) left.


I do have a question for @newVaper420 regarding the adjustable bowls. Are there any plans on making any females post for the panhead?

 

[Alexis]

Morning- wow, my mum is really getting into her Flowerpot. She has seen the light! Get this, now she is already wanting to get a different bubbler! I'm sending her Dhgate links!!

I can't believe she is now shopping for new bongs! So I'm trying to recall what I have seen that she may like. I stopped looking at glass while I focus on settling on a vape. She has been using the small black 14 mm male Toro bubbler in Vapecritic's video.

I think she wants more water, or at least a larger can to make it smoother. But she would be happier if it isn't too heavy to hold. I looked at the 9 inch CCG seed of life, which @invertedisdead champions so well!
https://m.dhgate.com/product/9-inch.../400548630.html#mvdpd-5-9|null:01:r2043621775
I dont know if this would satisfy her needs to be a lot smoother than the Toro, but easy to hold. It looks like it from your videos inverted. She won't be going to "Crushville" I don't think haha!
Or I sent her these links too:
https://m.dhgate.com/product/ccg-11.../406603861.html#mvdpd-6-9|null:01:r1974603635
https://m.dhgate.com/product/ccg-gl.../400355073.html#mvdpd-5-9|null:01:r2094536934

Or the Steroe Matrix, FC-187 V2, in Vapefiend's video?

But then, I just found this mini FC-186, looks like it may be perfect! Much easier to get going and to clear, surely smooth as you would get from a can this size (FC 186 is pretty smooth to me but a bit hard work at 34 cm, with some pullback, and blowback can be an issue:
https://m.dhgate.com/product/glass-.../394402632.html#mvdpd-4-9|null:01:r1515667706

The angle of this moutpiece looks really good for her also. No head tilting. I think I want one!

So just open to any words of wisdom from anyone with a perfect idea. I also thought about the FC-Rattle Can.

We should get 18 mm really. The 14/18 mm Female bowl was still prone to sticking on the 14 male Toro bubbler. Needed to be placed on mindfully to keep some "wiggle" in the fit.

I have the 14mm Male stubby bowl, could use reducer for 18 mm peices. 14 mm tools won't allow this. I CAN see an adjustabowl purchase coming? I must check see if Vapefiend stock it yet.
The 18 mm male bowl I have, direct into glass would drive her mad-it did me!
So I should maybe get F-M adapter for the 14/18 mm Female bowl for 18 mm Male glass.

I just remembered that! Okay sorry folks, I must go back to bed, am very Elev8ted! Big thanks guys.

 

[Hogni]

Alexis, the mini looks nice but you've linked just a pic. Could you post a link to the device for shopping?