Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

Chicken #420

I and I be Irie Vaping with U and U in Zion, mon!
OK, Folks...
I've been thinking about this all day, and I see no downside. So here it is:

The Ultimate FlowerPot Accessory: Titanium J-Hook.

You read right... now just imagine it. A NewVape Bowl sized chunk of Titanium, perfectly machined to match a 19/22 (18mm to us stoners...) female standard taper. Out of the side, a 1/4" diameter tube of Titanium is pressfit, locked into place with an internal pin, and (optionally) bent to resemble a standard J-Hook curve. I'm thinking 6" to 8" long, with silicon rubber sleeve tubing on the stem to keep it cool to the touch. Just pop a NewVape bowl on top to rock and roll! :D

I would buy 5 RIGHT NOW if this was available...

Edwyn, a lot of the local heads I've shown my FlowerPot setup to end up LOVING sweet low-temp J-Hook hits, but they want something less likely to break than glass, and many just don't want to mess with a water rig. Period.

All Titanium vapor path. Unbreakable. Compact. Light weight.

Thank this post if you want one... You all KNOW you want one! :D

Seriously, though, this one's a winner.
 
Last edited:

EmDeemo

ACCOUNT INACTIVE
OK, Folks...
I've been thinking about this all day, and I see no downside. So here it is:

The Ultimate FlowerPot Accessory: Titanium J-Hook.

You read right... now just imagine it. A NewVape Bowl sized chunk of Titanium, perfectly machined to match a 19/22 (18mm to us stoners...) female standard taper. Out of the side, a 1/4" diameter tube of Titanium is pressfit, locked into place with an internal pin, and (optionally) bent to resemble a standard J-Hook curve. I'm thinking 6" to 8" long, with silicon rubber sleeve tubing to keep it cool to the touch. Just pop a NewVape bowl on top to rock and roll! :D

I would buy 5 RIGHT NOW if this was available...

Edwyn, a lot of the local heads I've shown my FlowerPot setup to end up LOVING sweet low-temp J-Hook hits, but they want something less likely to break than glass, and many just don't want to mess with a water rig. Period.

All Titanium vapor path. Unbreakable. Compact. Light weight.

Thank this post if you want one... You all KNOW you want one! :D

Seriously, though, this one's a winner.

Intrigued...
 

Alexis

Well-Known Member
@Alexis I'm not familiar with the 186 numbers. I purchased the right angle's first and liked them. Then purchased the curved style and seem to prefer that style and feel it's stronger being one piece. Both function the same.

I'd also like to tell you that I'm using the showerhead on this smaller 14mm rig and find it easier to use because of less dead air needing to be removed means much smaller breath is required. The reduced volume of air due to the smaller 14mm rig means the heat must be turned down when compared to the 18mm. Additionally I'm finding by adding the insert to the 18mm it makes the draw resistance the same as 14 but still requires the dead air be removed.

https://www.newvape.com/flower-oil-rig-14mm
9061-1.jpg
Thanks very much Edwyn for taking the precious time to provide further enlightenment on various rig options. It is clear that many more rigs will come into favour, as a community I can see us discover more and more great FP models which will be fun.

@pxl_jockey - yes my friend I do have my Flowerpot complete setup as of this week. Im so sorry everyone for not being more forthcoming with details. I have gotten into a very dark place mentally at the moment and have not felt any joy or positivity, more like despair.

So I have not wanted to share something so positive until I am feeling that way. However you have asked me so I will spill:

5 parcels arrived this week. One direct from Newvape on monday, the controller on tuesday courtesy of @emmdeemo - with a super kind heart, having come into possession of several controllers after fixing a broken one- he so generously offered me it for nothing to help get the ball rolling....

I insisted on meeting him roughly in the middle with as much as I had spare, the least he deserves. Thanks again @emmdeemo (did I say that already?;))

And to my surprise, my 2 glass rigs from Dhgate also arrived tuesday, a week sooner than I expected.

And finally yesterday, a glass 14/18 mm reducer!

Emmdeemo's initial offer is what put the Flowerpot within financial reach initially. I then pm'd Edwyn with a few basic queries to clarify a few things. I was honoured and touched with the warmth and sincere helpfulness of his replies to me.

It felt like my personal happiness really mattered to him and he couldn't have been more helpful in a friendlier manner. I immediately felt compelled to join the club to be on the inside of this great community sooner than later, particularly due to the warm feelings I had from my first direct personal contact with Edwyn.:)

I also had some timely good fortune as a friend FINALLY paid me for my large Verdamper vaporizer I sold (or gave) him last year! So I didn't need to wait for my Aromed to sell and was set to go!
The customer service I received placing my order was top notch- all queries answered and I felt genuine care and compassion from both Edwyn and Lori processing, shipping the order and keeping me informed.

I really felt good about investing my money in these good people (who just happen to run a fantastic business without losing their human qualities one iota).

And the rest is history! I had just enough left over for 2 Dhgate bubblers (FC 186 and the 14 mm male black Toro bubbler on Newvape's site).

It all came together like a dream! I have not used it yet. Today I soaked parts in ISO. As I said though I have gotten into a dismal mental state, severely depressed and exhausted- none of which I wanted to share, waiting to feel positive again before sharing with you all.

Tensions at home with my mum have also hit the roof- due to my severe depression I am a miserable person to live with and there are some huge cracks in our relationship.

Today is actually my first day with no cannabis for several months- always edibles on vapor breaks. I feel that I need a short T-break to let the dust settle and allow peace to return, and physical rest and recovery.

I want my experience of the Flowerpot to be positive all the way. The excitement I have felt following this thread for months and the joy after my contact with Edwyn himself..i need to wait for those good vibes to return again now to begin actual usage!

I will save the minor details for later and a better moment. You will also see a change in me here in the forum from this moment on- I am conscious of my constant "inappropriateness" here and this will change now I swear.
So sorry to those good folk of you who I am sure I have irritated who rightly come here to learn about VAPORIZERS, and not my crazy upside down life.
And thank you for your tolerance.:tup:

New me now- still a joke and bite of philosophy for sure, don't fret!;)

I need really to retreat within and find some light again, and try to heal my home living situation before I am out on the streets (or worse).
Hold in there gang, I will be back, renewed, re-invented. Sorry for the negativity, big love to all, especially Edwyn and Lori for the sheer heart they put into everything they do, which I hope more folks will see with increasing clarity as time goes on.:love:
 

Alexis

Well-Known Member
Eagle has landed in Germany today and is on it's way to daddy!
Excellent Hogni! I am actually really pleased to think that I can sit on my Flowerpot for a short while and maybe see your own impressions first to bump up my excitement some more for when I am in ready mood.
I dont think it is a bad thing actually that you will miss out on the Liger untl Spring, so you can give more attention to the FP amd Supreme, and still have some time for the Ti so it doesn't get jealous!;)
 

buddingglasshead

Well-Known Member
giphy.gif


Just purchased the Panhead, infamous filter, fine grinder, coil post, and the threaded loading tool. All nice little QoL changes to my set up. Definitely not needed but very excited nonetheless. Thank you for the wonderful products @NewVape710



Is there any way to order extended length cords for both the power source and the actual heating coil? The cords both being too short is one of my biggest complaints about the unit.

Overall using it a ton. Got to love a daily driver ready and able to switch between flower and concentrates

Don't know about the coil itself, but the power cable is a standard connection and you should easily be able to find an extension cord. Alternatively, you could use a regular extension cable.

OK, Folks...
I've been thinking about this all day, and I see no downside. So here it is:

The Ultimate FlowerPot Accessory: Titanium J-Hook.

You read right... now just imagine it. A NewVape Bowl sized chunk of Titanium, perfectly machined to match a 19/22 (18mm to us stoners...) female standard taper. Out of the side, a 1/4" diameter tube of Titanium is pressfit, locked into place with an internal pin, and (optionally) bent to resemble a standard J-Hook curve. I'm thinking 6" to 8" long, with silicon rubber sleeve tubing on the stem to keep it cool to the touch. Just pop a NewVape bowl on top to rock and roll! :D

I would buy 5 RIGHT NOW if this was available...

Edwyn, a lot of the local heads I've shown my FlowerPot setup to end up LOVING sweet low-temp J-Hook hits, but they want something less likely to break than glass, and many just don't want to mess with a water rig. Period.

All Titanium vapor path. Unbreakable. Compact. Light weight.

Thank this post if you want one... You all KNOW you want one! :D

Seriously, though, this one's a winner.


I broke out my 18mm glass jhook after finding it in a drawer and it was stupid fun. Lots of flavor! Just wish I had one with better airflow. I don't know how much I'd pay for a full Ti one as I feel that may be expensive, but definitely a neat idea.
 
Last edited:

EmDeemo

ACCOUNT INACTIVE
Thanks very much Edwyn for taking the precious time to provide further enlightenment on various rig options. It is clear that many more rigs will come into favour, as a community I can see us discover more and more great FP models which will be fun.

@pxl_jockey - yes my friend I do have my Flowerpot complete setup as of this week. Im so sorry everyone for not being more forthcoming with details. I have gotten into a very dark place mentally at the moment and have not felt any joy or positivity, more like despair.

So I have not wanted to share something so positive until I am feeling that way. However you have asked me so I will spill:

5 parcels arrived this week. One direct from Newvape on monday, the controller on tuesday courtesy of @emmdeemo - with a super kind heart, having come into possession of several controllers after fixing a broken one- he so generously offered me it for nothing to help get the ball rolling....

I insisted on meeting him roughly in the middle with as much as I had spare, the least he deserves. Thanks again @emmdeemo (did I say that already?;))

And to my surprise, my 2 glass rigs from Dhgate also arrived tuesday, a week sooner than I expected.

And finally yesterday, a glass 14/18 mm reducer!

Emmdeemo's initial offer is what put the Flowerpot within financial reach initially. I then pm'd Edwyn with a few basic queries to clarify a few things. I was honoured and touched with the warmth and sincere helpfulness of his replies to me.

It felt like my personal happiness really mattered to him and he couldn't have been more helpful in a friendlier manner. I immediately felt compelled to join the club to be on the inside of this great community sooner than later, particularly due to the warm feelings I had from my first direct personal contact with Edwyn.:)

I also had some timely good fortune as a friend FINALLY paid me for my large Verdamper vaporizer I sold (or gave) him last year! So I didn't need to wait for my Aromed to sell and was set to go!
The customer service I received placing my order was top notch- all queries answered and I felt genuine care and compassion from both Edwyn and Lori processing, shipping the order and keeping me informed.

I really felt good about investing my money in these good people (who just happen to run a fantastic business without losing their human qualities one iota).

And the rest is history! I had just enough left over for 2 Dhgate bubblers (FC 186 and the 14 mm male black Toro bubbler on Newvape's site).

It all came together like a dream! I have not used it yet. Today I soaked parts in ISO. As I said though I have gotten into a dismal mental state, severely depressed and exhausted- none of which I wanted to share, waiting to feel positive again before sharing with you all.

Tensions at home with my mum have also hit the roof- due to my severe depression I am a miserable person to live with and there are some huge cracks in our relationship.

Today is actually my first day with no cannabis for several months- always edibles on vapor breaks. I feel that I need a short T-break to let the dust settle and allow peace to return, and physical rest and recovery.

I want my experience of the Flowerpot to be positive all the way. The excitement I have felt following this thread for months and the joy after my contact with Edwyn himself..i need to wait for those good vibes to return again now to begin actual usage!

I will save the minor details for later and a better moment. You will also see a change in me here in the forum from this moment on- I am conscious of my constant "inappropriateness" here and this will change now I swear.
So sorry to those good folk of you who I am sure I have irritated who rightly come here to learn about VAPORIZERS, and not my crazy upside down life.
And thank you for your tolerance.:tup:

New me now- still a joke and bite of philosophy for sure, don't fret!;)

I need really to retreat within and find some light again, and try to heal my home living situation before I am out on the streets (or worse).
Hold in there gang, I will be back, renewed, re-invented. Sorry for the negativity, big love to all, especially Edwyn and Lori for the sheer heart they put into everything they do, which I hope more folks will see with increasing clarity as time goes on.:love:

Your welcome. I cant do much out in the world but I can try and choose kindness.

We could all do with more kindness.

EDIT: Oh! And understanding too! Thats the other bit. ABL, always be learning :)

 
Last edited:

invertedisdead

PHASE3
Manufacturer
Is there any way to order extended length cords for both the power source and the actual heating coil? The cords both being too short is one of my biggest complaints about the unit.

Overall using it a ton. Got to love a daily driver ready and able to switch between flower and concentrates

I keep an extension cord hooked to mine and just move the controller and showerhead between tables.
 

psychonaut

Company Rep
Company Rep
lil bed o flower with a lil dab o rosin (both jack skellington), 670F SH uncapped, good stuff :D Flavor wasn't too far off from a full bowl of flower, but it tapered off into ABV. I gotta get some of those double weave Ti screens. Think Im gonna try 640F next, maybe roasting the herb slower will help. I may be done with hydrocarbon extracts except from specific producers!
 

EmDeemo

ACCOUNT INACTIVE
lil bed o flower with a lil dab o rosin (both jack skellington), 670F SH uncapped, good stuff :D Flavor wasn't too far off from a full bowl of flower, but it tapered off into ABV. I gotta get some of those double weave Ti screens. Think Im gonna try 640F next, maybe roasting the herb slower will help. I may be done with hydrocarbon extracts except from specific producers!

I'm back in the land of the living, uncapped, full air flow flying free. Lungs as fit as an ox with one lung.

IIRC, what I remember up in the 600's was something along the lines of a standard inhale tops out at about 630/640 (gives ya something like a 440f airflow), so I figure anything higher is just faster extraction and less of a window between spent and ABV flavour.

So 630f with a dab of BHO for me :) And more Chris Gethard Show :rofl:
 

little maggie

Well-Known Member
I need to stop coming to this thread and reading these posts. It's so tempting. I've been thinking of seeing if someone would trade me for one since I don't want to sell my stuff and deal with money. But from what I've read I can't imagine any owner wanting to part with theirs. Or even want anything else.

Thanks very much Edwyn for taking the precious time to provide further enlightenment on various rig options. It is clear that many more rigs will come into favour, as a community I can see us discover more and more great FP models which will be fun.

@pxl_jockey - yes my friend I do have my Flowerpot complete setup as of this week. Im so sorry everyone for not being more forthcoming with details. I have gotten into a very dark place mentally at the moment and have not felt any joy or positivity, more like despair.

So I have not wanted to share something so positive until I am feeling that way. However you have asked me so I will spill:

5 parcels arrived this week. One direct from Newvape on monday, the controller on tuesday courtesy of @emmdeemo - with a super kind heart, having come into possession of several controllers after fixing a broken one- he so generously offered me it for nothing to help get the ball rolling....

I insisted on meeting him roughly in the middle with as much as I had spare, the least he deserves. Thanks again @emmdeemo (did I say that already?;))

And to my surprise, my 2 glass rigs from Dhgate also arrived tuesday, a week sooner than I expected.

And finally yesterday, a glass 14/18 mm reducer!

Emmdeemo's initial offer is what put the Flowerpot within financial reach initially. I then pm'd Edwyn with a few basic queries to clarify a few things. I was honoured and touched with the warmth and sincere helpfulness of his replies to me.

It felt like my personal happiness really mattered to him and he couldn't have been more helpful in a friendlier manner. I immediately felt compelled to join the club to be on the inside of this great community sooner than later, particularly due to the warm feelings I had from my first direct personal contact with Edwyn.:)

I also had some timely good fortune as a friend FINALLY paid me for my large Verdamper vaporizer I sold (or gave) him last year! So I didn't need to wait for my Aromed to sell and was set to go!
The customer service I received placing my order was top notch- all queries answered and I felt genuine care and compassion from both Edwyn and Lori processing, shipping the order and keeping me informed.

I really felt good about investing my money in these good people (who just happen to run a fantastic business without losing their human qualities one iota).

And the rest is history! I had just enough left over for 2 Dhgate bubblers (FC 186 and the 14 mm male black Toro bubbler on Newvape's site).

It all came together like a dream! I have not used it yet. Today I soaked parts in ISO. As I said though I have gotten into a dismal mental state, severely depressed and exhausted- none of which I wanted to share, waiting to feel positive again before sharing with you all.

Tensions at home with my mum have also hit the roof- due to my severe depression I am a miserable person to live with and there are some huge cracks in our relationship.

Today is actually my first day with no cannabis for several months- always edibles on vapor breaks. I feel that I need a short T-break to let the dust settle and allow peace to return, and physical rest and recovery.

I want my experience of the Flowerpot to be positive all the way. The excitement I have felt following this thread for months and the joy after my contact with Edwyn himself..i need to wait for those good vibes to return again now to begin actual usage!

I will save the minor details for later and a better moment. You will also see a change in me here in the forum from this moment on- I am conscious of my constant "inappropriateness" here and this will change now I swear.
So sorry to those good folk of you who I am sure I have irritated who rightly come here to learn about VAPORIZERS, and not my crazy upside down life.
And thank you for your tolerance.:tup:

New me now- still a joke and bite of philosophy for sure, don't fret!;)

I need really to retreat within and find some light again, and try to heal my home living situation before I am out on the streets (or worse).
Hold in there gang, I will be back, renewed, re-invented. Sorry for the negativity, big love to all, especially Edwyn and Lori for the sheer heart they put into everything they do, which I hope more folks will see with increasing clarity as time goes on.:love:
 

Slagzord

Don't fuckle with shuckle
I need to stop coming to this thread and reading these posts. It's so tempting. I've been thinking of seeing if someone would trade me for one since I don't want to sell my stuff and deal with money. But from what I've read I can't imagine any owner wanting to part with theirs. Or even want anything else.

With you on that entirely. So intrigued by this device! I have so many questions, but I already know it is right for me. So it is a :) but also a :\ because :2c:. This thread is a :worms:
 

anasrzi

Well-Known Member
I know people have reported plastic degrading on torch lighters following an ISO wipe, causing the lighter to explode.

However, I do believe that very many experienced forum members have been cleaning glass parts in a ziplock bag of ISO for a very long time, without mention of negative effects to either the plastic bag or health wise from the cleaned glass parts (gongs, bowls, downstems etc).

So should not be a concern I don't think.

I found high heat to be the best cleaner on my sapphire dish @Alexis. Turned it up to 900c and virtually everything flaked off back to new once more, cleaner than when I got it I'd say :).

Just a thought
 

Alexis

Well-Known Member
I found high heat to be the best cleaner on my sapphire dish @Alexis. Turned it up to 900c and virtually everything flaked off back to new once more, cleaner than when I got it I'd say :).

Just a thought
Thanks bro, I wont be using any dishes for dabs- just showering flower, so I see bowl cleaning with ISO being easy as pie- looking afterbthe errlectric screens when I manage to get hold of a few sounds like it will need a little care and tact. Fortunately we have had some great tips and forewarnings about that.
Have a nice day in (not) currently sunny UK:)! (Uh-hum..chemtrails?):uhoh:
 

Pyr0

Stoned Roses
It looks pretty sunny at the moment, here on the Wirral @Alexis :)
I just received an errlectric screen, thanks to an extremely generous member here allowing me to purchase one from them. (HUGE thanks again ;) )
With the twill weave, it's definitely thicker than my plain stainless screen with a 1:1 weave and I can see why it's possible to stack them for concentrate use.
Looking forward to seeing if there's any performance differences in use... only another 5 hours in work...lol
 

Alexis

Well-Known Member
It looks pretty sunny at the moment, here on the Wirral @Alexis :)
I just received an errlectric screen, thanks to an extremely generous member here allowing me to purchase one from them. (HUGE thanks again ;) )
With the twill weave, it's definitely thicker than my plain stainless screen with a 1:1 weave and I can see why it's possible to stack them for concentrate use.
Looking forward to seeing if there's any performance differences in use... only another 5 hours in work...lol
Yes we have sun here today as well!:clap: chemtrails have been very heavy recently though in such a blatant fashion, blocking out the sunrise and sunset practically every day certainly here in Bedfordshire. They definitely come and go but currently seems to be full swing operation.

I am actually hoping to get some of the Ti double weave screens myself possibly from the same extremely kind and helpful member(?).

I said I would go for two initially, as I have three different bowls but hopefully at some later point in time Newvape might be able to offer the 0.75" screens, and therefore Vapefiend as well. We shall see!
Hope work flies by for you today! I need to make some enquiries now to find out what I am required to do to post my Aromed vaporizer to America, with regards to Customs forms and declaration etc.

I have an interested buyer but I have no experience in posting to the USA, so I will phone the couriers first and if they can't help I might give George a ring at vapefiend because I'm sure he will have some helpful advice. Wish me luck!
 

Pyr0

Stoned Roses
So the Errlectric screen is slightly smaller than the SS one I've been using (approx. 20mm vs 19mm) and it's absolutely the perfect size imho
It fits in the bowl, level and stays put without having to push it past the lip, which should help with removal as the double weave may require more maintenance than a plain weave
GkCBu00.jpg

The SS screen being larger, made for a slightly concave bowl and I would notice the underside of the loads to be a lighter in colour when dumped.
The Ti screen being the correct size and level in the bowl seems to mitigate this to some degree.
 
Last edited:

IAmKrazy2

Darth Vapor
So the Errlectric screen is slightly smaller than the SS one I've been using (approx. 20mm vs 19mm) and it's absolutely the perfect size imho
It fits in the bowl, level and stays put without having to push it past the lip.
The SS screen being larger made for a slightly concave bowl and I would notice the underside of the loads to be a lighter in colour when dumped.
The Ti screen being the correct size and level in the bowl seems to mitigate this to some degree.

Could you please provide a link to these screens? Thanks.
 
IAmKrazy2,

Baron23

Well-Known Member
@NewVape710 / @NewVape420 - wow, got my shipping notice this morning on my pan head that I didn't get to order until quite late yesterday. And its out for delivery already. Thank you, Edwyn.

Last night I ran my SH and decided to swap out screens. I was using a Ti single weave screen that Edwyn had thrown in the kit for me (or maybe it was SS). In any case, I swapped it for one of the Errlectric double weave screens (.75") that I bought before NV offered this style of screen. It fit perfectly and with a cheap disposable chop stick I seated it under the lip and into the groove.

I had just cleaned glass including the drop down I have been using with my 18 mm SH and I have to say that the double weave dramatically cut down on the particulants collecting in the drop down (and therefore I hope the particulants making into my lungs). Worked very well, even with some old Blue Dream that I have that grinds into almost dust. Eat it up with no problems.

Could you please provide a link to these screens?

Ok, Google Errlectric and you get this:

https://www.google.com/search?q=errlectric&ie=utf-8&oe=utf-8

Enter site and select 'Shop' and you get this:

https://errlectric.com/index.php/hikashop-menu-for-categories-listing

Select Errlectric Accessories and you get this:

https://errlectric.com/index.php/hikashop-menu-for-categories-listing/category/13-accessories

Third row down on the left are the screens.

I'm not trying to be a smart ass, but my mother would say to me "I could send you to the ocean and you would come back and tell me there was no water". In other words, look a bit harder, yeah?
 

Baron23

Well-Known Member
How do the errlectric screens work in the new adjusta-bowl body? Do the errlectric screens still fit nice and tight?

I already trimmed down the two .78 screens to .75 because I bought them for the OG bowls.
I'll be able to tell you once I get my pan head but its not in my possession yet.

Anybody else have a final pan head in hand and can perhaps answer?
 
Baron23,
  • Like
Reactions: steama
Top Bottom